Question about Sharp Audio & Video Receivers

3 Answers

I have a sharp aquos tv model lc32d6u, we have lost the audio, we have tryed turning the set on and off, nothing. we are serviced by Comcast and it is not the box. I can hear a small click when we turn the set on

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Try this
1. Power off both the TV and the DVR.
2. Plug in the HDMI cable to both units.
3. With the DVR off, press and hold the power button on the unit until the word BOOT appears on the display.
4. Wait until the unit reboots and shows the clock again, then power the TV and the DVR up.
5. Choose the appropriate input on the TV for HDMI.
6. Use the SETTINGS button on the DVR remote to get into the "more settings" option.
7. Find audio settings and choose HDMI output, press select.
Hope that helps.........

Posted on Jun 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

These units have seen a high rate of HDMI port failure, if it is still under warranty give Sharp a call and they will fix it, if not, still give them a call and see what they will do otherwise they can sell you the part that you need to replace. Let me know if you need anything else

Posted on Jun 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Dear Sir/Madam,

Make sure mutes is not "ON" mode.

Within 30 minutes of pressing MUTE, mute can be cancelled by using one of the methods below:
1) Mute will cancel if you press VOL -/+ or MUTE
2) Mute will be cancelled after 30 minutes have passed.

However, the tv will not suddenly output a loud sound as the volume level is set to 0 automatically.

Please check these settings:

Digital Noise reduction
Audio Only
Output Select
Quick Shoot

Thanks
Good Luck

"Don't forget to rate the solution"

Posted on Jun 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get any sound from my yamaha sound bar


does the tv have optical out or coaxial out this is your only option for this sound bar.

Jan 18, 2014 | Yamaha YAS-101 Front Surround Sound Bar...

1 Answer

I am trying to connect my samsung sound bar to my new sharp equos 60 inch LED (Model: LC-60LE600U) an optical cable. I have a direct tv receiver and blue ray player hooked up with hdmi cables. I have...


I just got this TV 3 weeks ago. I noticed the AUDIO issue too.
Every power up, HDMI change etc, I would have to go into the MENU/OPTION/ and toggle the PC IN/HDMI IN setting to get my Optical OUT AUDIO working.

WARNING:

DO NOT UPDATE TO THE NEW FIRMWARE. :(
Tonight I decided to do the Firmware Update on this AQUOS LC-60LE600U with hopes that my audio issues will be fixed.

WRONG... Now I have NO Digital Optical OUTput, and worse, the trick to Toggle (PC IN/HDMI IN) No longer works!!

So now I am out of luck and NO LONGER can use OPTICAL OUT for any of my Dish Network Satellite TV Viewing.

I called SHARP AQUOS Tech Support , firt Rep sucked , had nothing but stupid responses like , use RCA Audio OUT.

Or just plug your OPTICAL OUT from your Dish Network HopperDVR Directly to my A/V Home Theatre Receiver.

I may have to do that afterall!!!!!!! But this simply Bypasses the PROBLEM and doesnt resolve my TV Optical Out Problem.

Then I called , talked to a Very nice guy named Travis. He explained it.
I hope some of you can explain it to be better, but here is what he said.

HDMI has some kind of Digital Content Protection, LLC provides HDCP (which was developed by Intel) for HDMI.
apparently this is the JIST of this he said. Exoplaining some issue where Powers That Be, (BIG MOVIE CORP) or such want to make it so Digital Audio cant pass from HDMI to OPTICAL as easy???????

I dont get it. So it was never supposed to ....... BUT.. The (PC AUDIO IN/HDMI IN) Toggle trick made it work.

Turns out the NEWER Firmware Fixed it so the Toggle Trick WONT WORK.
I cant imagine this is going on. How many Millons of TV Viewers experience this? There has to be more to it than this.
My HOPE..... is to find the OLD Default Firmware for this TV, cause even though a Hassle to TOGGLE on the AUDIO, better than NO AUDIO NOW ! ARGH!!!

Please, if anyone can provide ANY info or firnware files for our AQUOS LC-60LE600U I would be SO MUCH HAPPIER.

Hope this helps everyone!
Dave in Iowa

Nov 07, 2012 | Audio & Video Receivers

1 Answer

Lost remote codes book from comcast to get their remote to WORK my nikko amplifier. The TV is a sharp aquos. The amp is a NIKKO NA590 amplifier.


http://sitesearch.comcast.com/?q=remote+control+tv+codes+&cat=com&con=www&sec=&PageName=Comcast%2BOfficial+Site+'+High-Speed+Internet%2C+Cable%2C+Phone+Service+Provider

Click on your remote and you can download the manuals with codes. Hope this helps

Jan 14, 2011 | Audio & Video Receivers

3 Answers

Att uverse receiver hooked up to sharp aquos tv, remote quits


first try new batteries and be sure you have pressed the AT&T mode button at the top left of the remote - if you still have issues then on the sharp tv menu - turn off any energy saver mode, Optical Picture Control, taking the picture mode from dynamic or vivid to standard, and if that doesn't work - try changing the backlight settings if your tv has one.

Aug 23, 2009 | Denon AVR-1908

1 Answer

Problems with Sharp Blu Ray Player "copy protected signal"


Possible solution: You set up your remote to run your amp from the TV control, using the AQUOS Link. Even though your amp is out of the loop, it's still recognized by the TV. You might have to reset the TV back to default and run the AQUOS Link again.

Apr 19, 2009 | Pioneer VSX-D514 Receiver

1 Answer

I have a Denon 589, PS3 and Sharp Aquos. Using HDMI cables, PS3 to TV directly = great signal. PS3 to Denon to TV= no signal.


ON PAGE 98 OF YOUR MANUAL YOU WILL SEE THE RES OF 1080P ARE NOT HANDLED SO YOU SET YOUR PS3 RES TO 1080I, 720P YOU WILL HAVE PIC FROM YOUR PS3 TO YOU DENON TO THE TV

Nov 27, 2008 | Denon AVR-3806 Receiver

1 Answer

Receiver won't put out sound to LCD Sharp aquos


I have the same problem with my Sharp Lcd and Onkyo 804. I believe one problem is that the TV can not accept dolby digital or dts digital audio signals through HDMI. It will play sound if it receives a PCM signal through HDMI. You can try switching the type of signal on the cable box settings and on the dvd player. I switched to PCM and got sound through the TV and the receiver. The problem is that PCM is usually only a 2 channel signal and Dolby 5.1 will sound better through the surround sound theater system. I have not found an absolute solution to this yet, but I am willing to not get sound through the lousy TV speakers in order to get top notch sound through the Onkyo.

Nov 12, 2007 | Onkyo TX-SR803 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Sharp Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...