Question about Kitchen Ranges

2 Answers

I removed the oven door but cannot get it back on. I also need the number of a service centre where I can call for a service in Epping, Victoria in Australia. Can you help?

Posted by on

  • rlcostanzo Jun 28, 2008

    Hi the oven make is Eurolec country kitchen model 35605506. Do you know of any distributors or repairers in my area? Thanks.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Can you give me the name of the manufacturer and model please?

Posted on Jun 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

It would be to our mutual advantage if you could post back the brand/make and exact model of your Kitchen Range.

Thank you for using FixYa.


Posted on Jun 28, 2008

  • Louie  Role
    Louie Role Jun 28, 2008

    Hi,

    Surprising but the manufacturer of your kitchen range has a single page website here. As stated there, "...FOR ALL SERVICE AND SPARE PARTS ENQUIRIES PLEASE CONTACT 1902 215 443
    $8.97 fixed fee mobiles extra Info FM..."


  • Louie  Role
    Louie Role Jun 28, 2008

    Due to limited or no documentation for your particular brand/model, perhaps your best option would be to contact the manufacturer or their authorized service center(s).

    You could try:
    Eurolec Appliances Pty Ltd DANDENONG, VIC 3175 (03) 9793 6588 web site

    Eurolec Appliances Pty Ltd PO Box 33, Springwood Qld 4217 Ph: (07) 3209 2666

    Warranty service agent for Eurolec 0418 823 545
    GASFIT APPLIANCES SERVICES PTY LTD



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My elderly neighbour is trying to light her Hygena Classi Oven built in when she turns the knob to the required number no gas is coming out to light it.


Hello Jean;

My name is Peter. I am a retired field service appliance technician.

There are several different components that may be at fault for this problem. The most probable is a bad gas ignitor. Your ignitor may either be broken or too weak to open the gas valve.

On built in wall ovens:
1.) Remove the oven door. Tilt it out to where is stays slightly open and lift straight up. When replacing the oven door make sure the hinges that the door mounts on are pulled slightly out to slide the door back on.
2.) Remove the cover on the bottom of the oven. You will see the gas burner and in the center of the back wall the gas ignitor.
3.) To replace the ignitor, you will have to remove the two plates below the ignitor.

Locate your oven model number. It is on a label either on the face of the oven after you open the door or on the side of the door.

Go into the internet and search; "Ignitor and your model number".

Make sure both your oven gas and electrical power are turned off before you do anything!

Mar 06, 2016 | Kitchen Ranges

1 Answer

Oven door keeps open ay ideas about the fault cheers


make this test and fix it. GOD BLESS YOU


Door Hinge

An oven door repair may be needed if the door hinge breaks or is bent out of shape. Oven doors have two door hinges, a left and right. On some ovens the same hinge is used, on other ovens the right hinge and left hinge have different part numbers. The door hinge sometimes is sold with all necessary parts and springs, other times the parts need to be ordered separately. An oven door repair for a door hinge is a relatively easy repair for a do-it-yourselfer.


Enter your model number to see parts for your range/stove/oven.
Help me find my model number


Outer Door Glass

If the outer door glass is broken, it can be replaced. This oven door repair requires that the oven door be removed from the oven and layed down on a sturdy flat surface. The outer door glass is made of tempered glass. Use eye and hand protection when performing this oven door repair.

Nov 04, 2013 | Kitchen Ranges

1 Answer

Electolux oven door


replace the door hinges . It appears that the springs in the hinges have failed and the springs normally come as part of the hinge. Contact Electrolux with the details or go to an appliance service centre.

May 19, 2013 | Kitchen Ranges

1 Answer

I have a small, 4-burner gas stove; no wondow in the oven door. I think my stove had a mouse infestation. I think the insulation above the oven has mouse urine in it; I can smell it, although there is no...


It is common for mice to get into the oven box insulation and nest. I had this problem before and its not likely you'll be able to get rid of the odor without replacing the insulation. Another issue is any fecal matter the mice leave behind. This can become a health hazard (expecially in an appliance that you use to prepare food). I would recommend replacing the insulation. If the model oven is correct, the insulation can be purchased for around $20 at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

The part number will depend upon your COMPLETE model number (located on a nameplate around the oven door opening, or lower drawer opening (if equipped). On some models, the model number will appear on the back of the operator console. The first three sites on the list include exploded view parts illustrations to assist you with locating and properly indentifying any parts you may need. The insulation for the Magic Chef 31000 series is listed under the "Body" parts list.


To replace the insulation on MOST ranges, all you should have to do is lift the range top to access the oven box. The top on most ranges can be lifted by removing a series of screws that are usually holding it secure under the bottom of the front edge. You will need to open the oven door to see them. CAUTION: Do not lean on the oven door as this may cause damage to the door hinges and springs.

On the Magic Chef 31000 series, it appears that you will need to remove the burner control knobs, followed by screws holding the burner control control panel in place. You should also remove all the orifice covers and burner grates from the top of the range. Once the burner control is removed, remove the top panel, followed by the burner box top panel. The insulation will be wrapped around the oven box. It should just lift out. Depending on the potential infestation, you may want to wear a dust mask and use a vaccum to **** up any loose debris. CAUTION: Turn off the gas supply BEFORE attempting any repairs - if this is a gas range.

If you have questions, please post back and let me know. I hope this helps you.

Apr 28, 2011 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Trying to find model number of an old Magic chef gas oven


depending on age, sometimes on back, or even under the main top if it lifts up, sounds as uf you would need to replace the door hinges

Nov 25, 2008 | Magic Chef 31000 Gas Kitchen Range

2 Answers

GE Range Model GRCR3825ZWW-1 DOOR error code on range display


The door latched Micro-switch is not working or is dirty.
Remove the back panel, in the middle of the back there will be a metal arm that moves in and out when self cleaning latch is closed and opened. This arm pushes two or more Micro-Switches in the back, they are dirty or not working and need replacing.

Nov 05, 2008 | Kitchen Ranges

1 Answer

Frigidaire oven door locked


SOME RANGES ARE DESIGNED TO LOCK IF THE CONTROL SENSES A TEMPERATURE EXTREME. IF THERE IS A FAILURE OF THE SENSOR THAT MAKES THE CONTROL THINK THE TEMP IS UP, IT WILL LOCK THE DOOR TO PREVENT INJURY. REMOVE THE BACK PANEL AND FIND THE OVEN SENSOR LEADS COMING OUT THE BACK OF THE OVEN. DISCONNECT THE SENSOR AND CHECK THE RESISTANCE. AT ROOM TEMP IT SHOULD BE SOMEWHERE AROUND 1084 OHMS. IF IT IS NOT CLOSE,
THE SENSOR IS BAD. PLUG IN A NEW SENSOR AT THAT CONNECTOR AND THE DOOR SHOULD UNLOCK. THEN GET INSIDE THE OVEN, REMOVE THE OLD SENSOR, AND REPLACE IT WITH THE ONE PLUGGED IN.

Feb 12, 2008 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Service on Industrial oven


Call hobart.Their a commercial food equipment service outfit.Heres the number 1-888-4hobart.

Jan 18, 2008 | Garland H283 Gas Kitchen Range

1 Answer

Oven door


dat, If your model starts with 790. there is a service flash regarding the hinges. Oven door not closing all the way. Affected model serial numbers VF-428xxxxx through VF-434xxxxx. There is a hinge kit for it, part number depends upon your full model number. You may want to call Sears and inquire about the service flash, you should be covered. Catriver..post back.

Mar 04, 2007 | Kenmore 96213 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

paulcarew

Level 3 Expert

2059 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...