- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You mean connect printer to computer . Before connecting the cables , insert the install disc in the computer drive and follow instructions . When installation os software/driver is completed , connect the USB cable to computer and printer and power cord from printer to AC plot . Press the power button and wait for Windows to confirm installation is successfull . You can now use yoiur printer . Best regards , fanaudi .
You can connect this Epson printer to your computer using an USB printer cable or to your LAN using a LAN cable. The easiest way to connect this printer to your computer is by the USB printer cable. You also need to install the Epson printer driver for this model printer. The printer driver is on the CD that is supplied with the printer, if you do not have this CD then you can download the printer driver from the Epson WEB site and install it on your computer.
You can download the Epson printer drivers from theirsupport WEB site. Please click on this link and
select your model printer todownload :-
disconnect printer from computer -- prepare two cables and drivers -
(USB cable and power cord, along with CD software drivers )
install s/w (software) by inserting CD in drive bay -- allow for auto run to occur install drivers , follow instructions.
when prompted connect power cord to printer and to Ac wall outlet, then connect USB cable to computer
continue following onscreen instructions. printer will be installed automatically and will be recognized by computer
connect a printer to a switch.
install the software cd on every computer that comes with your printer.
connect the printer to any pc that is connected to network.install the driver cd.
go to printer properties select share printer.
go to another then control panel.click add network printer.
Do Below steps to Connect your Epson Stylus Photo R260 Printer -
-Connect Power Cable to Printer.
-Another Connect Printer Data Cable/ USB to the Computer
-It will immidiely ask Driver so, Install your Eson Pritner Drivers CD in your Computer.
If Don't have Driver's CD, Download from Internet - http://www.siliconguide.com/drivers/device/119/
The HP 640C will connect to a PC with either a parallel or a USB cable. If you are connecting to a Mac computer, you will connect to your PC with a USB cable. I would recommend the USB cable for either the Mac or a PC as it is a better connection. If you do not have either of those cables you will need to buy one from your local computer accessory store. Turn off your printer and computer. Connect your cable to the printer and computer. Then boot your computer, and once the bootup finishes, turn on the printer. At that point you will have to install the software driver cd that came with the printer. If you do not have the software you can go to the HP website and download the correct drivers for your computer.
Try this. Before connecting the printer put the printer driver cd in the drive and install the drivers. If not asked to connect the printer, then restart the computer with the CD in the drive Connect the printer. Printer will be detected.
first thing keep u r printer cd ready.Second uninstall your printer from add and remove programs and also disconect the printer from computer.Know re start your pc and install printer drivers with cd dont connect the printer untill it askes to connect. once setup asks u to connect connect the printer cable to your computer.Once the setup is finished then trie scanning from printer to pc. It will work.
USB is the most common household printer to computer connection, just plug the printer in and it will walk you through the windows set-up, or put the CD from your printer in your computer and the CD set-up will walk you through the set-up, when you buy a printer ask a sales person to show you how to connect it and set it up.