Question about Epson AcuLaser C1900 Printer

1 Answer

Acculaser C1900 Printing too low on paper

Hello,

I just read you post on Fixya.
I was wondering if someone get back to you already on this matter, or maybe you found some explanation on how to resolve this?

Would you mind sharing that info with me?

Best regards,
Denis Vanrijkel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 691 Answers

Which post. There are hundreds of thousands to choose from.

Posted on Jul 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson Acculaser c1100 ink blead


First rule out that it is a paper issue by trying a different type of paper

If that dosnt work
check if the gradation setting is too small when printing graphics. On the Basic Setting menu in the printer driver, click More Settings, adjust the gradation setting by sliding the Contrast slider bar

If that dosnt work
Clean the print head .
see steps at the bottom

If that dosnt work
It is starting to look like drum/photoconductor problem, this may need to be replaced (the most expensive solution)



Follow the steps below to clean the printer head.
r_1.gif Open the cleaner cover on the right side of the printer. Then, open cover A. d580095.gif
r_2.gif Pull the blue lever on the right inside of the printer. d580096.gif
r_3.gif Move the blue cleaner slowly in and out once. d580097.gif
r_space.gif r_note.gif Note: r_space.gif r_space.gif Move the cleaner completely in and out. Otherwise, the printer may not be cleaned effectively. r_4.gif Push back the blue lever on the right inside of the printer. d580098.gif
r_5.gif Close cover A, then the cleaner cover. d580099.gif

Sep 11, 2009 | Epson Aculaser C1100 Printer

2 Answers

Ink from my deskjet 5650 smears off my glossy postcards.


Hello there jbaerpynes.

You must use HP branded glossy paper in this particular printer as recommended by the manufacturer. Because HP ink is much finer than most other inkjet printers, the ink sometimes does not set in properly on generic papers, especially glossy ones, and can smear right off.

Try new paper and get back to me. If you have any other questions, please don't hesitate to comment on my post. If I helped you, please give me a positive rating.

Thanks.

-Phil Traversa

Aug 19, 2009 | HP LaserJet 1300 Printer

2 Answers

EPSON AcuLaser C1900 paper jam when printing black or color


I have just gained a C1900 second-hand and have set it all up and got the drivers and so forth. Am having exactly this problem, right down to the folded pages, wide top margin and 'Check Paper Size' error message. Did you ever find a solution to this? Anyone else know how to fix it?

Jun 06, 2009 | Epson AcuLaser C1900 Printer

1 Answer

Ghost image on Epson Acculaser C4000


Ghosting can be caused by several components: 2nd BTR transfer roller, Photoconductor Unit (PCU) or the Fuser unit. The most likely is the PCU contacts being dirty, caused by toner getting between them. Open the front of the printer (cover B) and lift out the photoconductor. Clean all of the metal contacts down the sides of the PCU with a cloth and wipe out any loose toner from inside the printer and give the contacts inside the printer on the R/H side a good clean. Replace the PCU and close the front cover.
Hopefully all will now be well, if not open cover A and clean the transfer roller on the inside of the cover. If problem persists you will need to get a Tech out to look further as without seeing the printer it is pretty hard to diagnose.
Good luck.

May 20, 2009 | Epson AcuLaser C1900 Printer

1 Answer

Fotoconductor fail


Hi Friend,
you can buy a replacement fuse and install it in your current photoconductor and reinsert and away you go. you say how, well i have carried out this proceedure twice already and still printing well.
my printer is also a c1900 i purchased my fuse on ebay for a fiver and it came with full instructions and photos on how to ( is is easy ) also inc was information on saving tonner which also works. since then i bought a replacement fuse at my local electrical retailer spares department and am currently using this one as i said i have changed fuses twice now. i hope this works if not contact me and i will copy that which i have.
many thanks
stevieboy

Oct 26, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Service Req C0302


CPU Error. Mainboard is faulty.

Jul 04, 2008 | Epson AcuLaser C1900 Printer

2 Answers

Worn Photoconductor Epson C1900 laser Printer


hi this solution has already been covered in full lengths. Epson c900 and c1900 are similar. have a look at my posting on this. photoconductor reseting by Labatt in this forum. read from the start.
http://www.fixya.com/support/t146110-epson_aculaser_c900_photoconductor

Jan 29, 2008 | Epson AcuLaser C900 Printer

1 Answer

Epson AcuLaser C1900 starts printing too low


I have a C1900 with an error "Service Req E021". I appreciate any help as to what this refers to please.

Jan 05, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson AcuLaser C1900 paper jams and almost no ink


If paper jam occurs frequently, wipe the pickup roller with a clean dampened cloth. Follow the steps below:
  1. Open Cover AB of the printer.
  2. Open the cover below the paper path roller.
  3. With a clean dampened cloth, wipe the pickup roller.
  4. Close Cover AB.
If the glass on the print head filter is dirty with toner, wipe it with a clean cloth. A vertical white line may appear in the printout. Follow the steps below:
  1. Open the front cover.
  2. Tilt the waste toner collector and pull it out.
  3. Grasp the handle of the print head filter with your fingers and gently pull it straight out of the slot. (**Note: Be careful not to spill toner that has accumulated on the print head filter. )
  4. With a clean cloth, wipe the glass surface of print head filter.
  5. Hold the print head filter by the handle and gently insert it all the way into the slot.
  6. Reinstall the waste toner collector.
  7. Close the front cover.
The print quality problem might be something as simple as turning off the Toner Save mode using the printer driver or the printer's control panel menus.
There may be a problem with the photoconductor unit. You may need to replace the photoconducter unit.
Or it might be something rather more serious (hopefully, not)Print out a status sheet. If a blank page is ejected, the problem may be with the printer. Turn off the printer and contact your dealer.

Jan 04, 2008 | Epson AcuLaser C1900 Printer

2 Answers

Paper Stuck in Printing Calculator


Maybe the commenter should get a life and do something else besides trolling sites like this sniping at people trying to do real work.

We came here to see if someone had solved the problem...sure, we're smart enough to buy a new one, but why throw out something that can be fixed for a few minutes time or a few dollars investment.

My problem ended up being a small piece of paper caught in the paper path...working paper through it several times cleared the issue. Hope that helps someone.

Apr 03, 2007 | Sharp EL-2630PII Calculator

Not finding what you are looking for?
Epson AcuLaser C1900 Printer Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...