Question about Samsung SGH-t629 Cellular Phone

1 Answer

Samsung T629 Keypad/button issue.

His has been recurring for a while now. My Samsung T629's buttons stopped working a while back when I got out the shower to grab my phone. The phone can receive calls and everything is fine except for the buttons. I tried to dry it with a fan/blow dryer but to no avail. Got it repaired and it was fine but now the slightest bit of moisture causes the phone's keypad to stop working, like from me being on the phone while sweating a lil. I'd dry it or give it a few days and it'd work again.

So the phone i guess met with some moisture and the buttons dont work again, but this time blow drying isn't doing the trick. Is there anything I can do or should I give it more time to dry up on its own or what?

Posted by on

  • AllenEllis Jan 05, 2009

    I don't even recall damaging mine at all - I'm quite careful with electronics. After plugging it in one day, every button on the device has stopped working. When I slide it open it responds with the backlight, but I've pressed every button and can't get any response from the device. It's brand-new, too.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,752 Answers

You need to take the phone and have the sub-board replaced and the phone fully service

Posted on Jun 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On a GE Profile Performance oven the code F7 show up on the key pad and the oven Beeps. Hitting the end or stop button stops the beepimg for about 5 minutes. Turning the power off achieves the same...

Hello there
The code can be caused by a faulty keypad or a Stuck keypad which may mean relay is turned on. Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel. :

Jul 21, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

My phone works but every time I go to answer or check a message the buttons don't work at all. I cant even go through my phone the buttons just don't work can anybody help me?

DEAR, check the keypad of your phone. Maybe there is some dust inside the keypad so that your keypad is got infected with that... regards,

Jun 04, 2009 | Samsung SGH-t629 Cellular Phone

1 Answer

Samsung t629 screen replacement

have the LCD replaced....

The water damaged one you can take that to a mobile center and see if you can have it fix

Jul 29, 2008 | Samsung SGH-t629 Cellular Phone

1 Answer

Button issue

send it back for a new one or sue idk

Jun 26, 2008 | Samsung SGH-t629 Cellular Phone

1 Answer

Sgh-t629 problems

I had the same problem with the phone working, buttons and all but just the screen is white. Get a blowdryer,open the thing up and blow it for a little bit and it'll start working again.

May 27, 2008 | Samsung SGH-t629 Cellular Phone

1 Answer

Trying to get samsung t629 to access att website

cant get internet on samsung t629,slide phone, it has t zone. but when i press the button just keeps going and going until i have to stop it,

Apr 30, 2008 | Samsung SGH2100SGH600V300 Unlock/Unlocking...

1 Answer

Keypad settings

the only options Ive found for this are if you hit a button with the slider closed it asks if you want to unlock the keypad. Then you hit the right top button (says "ok") and it unlocks...this stays like this until you open and then close the slider. This is the only way I know of to unlock the keypad, I have not found any other way in settings menu or anywhere else. Good luck!!

Dec 20, 2007 | Samsung SGH-t629 Cellular Phone

Not finding what you are looking for?
Samsung SGH-t629 Cellular Phone Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides