Question about Philips 42PF9631D 42 in. Plasma Television

1 Answer

Replacing the Y-MAIN or Y-SUSTAIN Board in Philips 42PF9630A/#&

Do you know how difficult it would be to replace the Y-MAIN board in a Philips Plasma 42PF9630A/37? My TV died and red power light flashed 7 times repeated. Repair shop quoted Y-MAIN board replacement, but this is too much to spend on an out of warranty TV.

Thanks in Advance for any help

Posted by on

  • mrusso1 Jul 17, 2008

    I was also told I need a y-sustain board as well.  My tv is out of warranty and cost to much to repair.  I was wondering if it's possible to buy the board only and install it myself.  Thanks

  • Anonymous Mar 19, 2014

    power stays on for a short time and turns itself off

×

Ad

1 Answer

I called PTS 1-800-844-7871 they told me it was an easy fix. The part is $162.75. Im gonna try it.

Posted on Aug 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 42" PHILIPS


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this will help to solve the problem....

Sep 26, 2011 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

Phillips flat tv 42PF9630A Will not turn on and power light flashes red 7 times


The power supply board it is the causes and the problems.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement.

Mar 06, 2011 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

When powering on, the red led light flashes 7 times, pauses and repeats. TV will not power on and stay on.


Ur power board,it dead.Check all capacitors,for puffs ups caps.If see replace the cap.No,ur board it still dead,but very hard to find or impossible to find the parts that cause the power board to die must replace the whole board.

Nov 10, 2009 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

I have a Philips 42PF9630A/32 Plasma TV, red led blinks 7 times


No,body can cofirm u have to troubleshoot change the boards to know the problem.

Oct 22, 2009 | Philips 42PF7220A 42 in. Plasma Television

1 Answer

Philips 42PF9630A/32 Plasma TV RED led blinking 7 times


Are there any blown caps on the PSB-power supply board. Most sets have sammy boards and they used very shotty caps. If there are no visual clues being a poped cap at the top (X) they simply often do vaporize and dry out. The YSUS-Main and the 2 Y buffer boards control the picture OSD-on screen display. Your not getting any of that. So power supply is where you start first. The YBU-upper and the YBL-lower control the upper and lower OSD the Ysus main control both of them. Usually if you have one in the door you have to replace all 3. But not always. If you were to replace any of the boards I would replace the YSUS-Main, or get the board reworked at a pc repair shop that does board level test and repai. Its more cost effective.

Best Regards and Semper Fi

Oct 12, 2009 | Philips 42PF7220A 42 in. Plasma Television

1 Answer

I have philips plasma tv model #42PF9630A with ambient light


last time I had seen these syptoms on Philips plasma it was bad panel. Replace tv panel is too expensive to replace.

Aug 29, 2009 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

37' philps flat tv


4 blink error for that model is i2c communication failure specific to ssb (small signal board) if intermittent should upgrade firmware to newest firmware and if constant would need to replace small signal board

Aug 18, 2008 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

Philips 42PF7320A/37


a 7 bliink error for this model is an 8.6 volt error normally caused by the y main overloading the power supply. disconnect the y main from the power supply and if the tv starts up check primary voltages per power supply sticker on pdp and if correct replace y main and y upper and lower buffer boards as they work together as circuit

Aug 14, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

Philips 42PF9630A/37 PLASMA TV


Replace that board the part number is 996500032643. go to www.vancebaldwin.com for the price of the board.

Aug 10, 2008 | Philips 42PF7320 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Philips 42PF9631D 42 in. Plasma Television Logo

1,312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75283 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...