How do I remove the seat on a 2002 Supe Dyna Glide?

Disconnect the battery, pull the out primary cover off, undo the jackshaft fasteners and remove same, undo battery and 70 wires from starter, undo (need long extension 1/4 inch ball socket) two starter screws from the right side and then remove starter.

Remove seat. Disconnect battery. Undo two bolts at rear of battery box. Push down on Left side of box(rear of box). Slide out top plate. Pull box out and up. Hope that helps.

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://itstillruns.com/remove-seat-dyna-wide-glide-7443052.html
https://www.mediafire.com/file/zesu7fyh2weodrf/2008_Harley_Dyna_Service_manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/dyna-wide-glide-105th-anniversary-edition-2008-owners-manual-66532
https://www.6ya.com/ to speak to me personally

Remove the rear seat screw(s) and then pull the seat rearward

On most Dyna models, the battery tray raises and lower and simply traps the battery cover between the battery and the frame. Look on either side of the battery box. There may be some bolts on each side. There should be two bolts that "lock" the battery box and one that raises and lowers the box. You may have to remove the seat to get the cables off the battery or access the bolt that raises and lowers the battery. All my experience with the Dynas has been on 1999 and earlier models.

Good Luck
Steve

Just inside the frame from the battery, there's a "jackbolt" that raises and lowers the battery tray. Turning the bolt counterclockwise lowers the battery tray and vice versa. You must loosen two bolts on the right side of the frame just behind the battery box between the battery box and the rear fender. Once the battery is lowered, you'll be able to get the top cover off and disconnect the battery cables. Disconnect the negative first when taking the battery out. Connect the negative last when installing the battery.

Good Luck
steve

Best as I can remember, you take a single bolt out of the back of the seat, lift the rear of the seat and pull to the rear.

Good Luck
Steve

It sure will!! You answered your own question. guess i get no points for this one.