Question about Edimax (PS-3205U) Print Server

1 Answer

PS3207U problem with HP 1060

Hello from Italy,
I hope you can understand my english.! :)

I have installed edimax print server PS3207U . Connected to the usb port a printer hp1060. All ok ..from administrative tools the printserver recognize correctly the printer model ..status ready.
On the pc where I have installed the printer , I can see (windowxp) the printer that is "ready" , the port is correct.
When I try to print : nothing happened. no erro no print ... if I open the printer icon on the right bottom of task bar .. I can see the document "pending".
No print. No error.

Best regards
Mauro

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Same problem with a Hp 3300 and a Hp960c, both of them plugged and recongnized by the unit, there was no way to print.

Then I upgraded the unit firmware to version 1.3 and now both printers are working!

Posted on Apr 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Even since we install the edimax server, the printer will just halt and we have to reset the spooler again


Setting the location of the spool folder By default the spool folder is located at systemroot\System32\Spool\Printers. However, this drive also holds the Windows system files. Because these files are frequently accessed by the operating system, performance of both Windows and the printing functions might be slowed.
If your print server serves only one or two printers with low traffic volumes, the default location of the spool folder is sufficient. However, for high-volume printing requirements, to support large numbers of printers, or to support large print jobs, you should relocate the spool folder. For best results, move the spool folder to a drive that has its own controller, which reduces printing's impact on the rest of the operating system.
For information on relocating the print server spool folder, see Change the spool folder location.

To set up a printer to print to multiple devices
  1. Open Printers and Faxes.

  2. Right-click the printer you are using, and then click Properties.

  3. On the Ports tab, select the Enable printer pooling check box.

  4. Click each port where the printers you want to pool are connected.
Notes
  • To open Printers and Faxes, click Start, and then click Printers and Faxes.

  • With printer pooling, the printers must be the same type of printer using the same printer driver.

  • The previous procedure assumes the printers you want to pool are already in the Printers and Faxes folder.
  • Check for print jobs in que,this can cause the printer to spool if a print job is in que.

Dec 09, 2010 | Edimax PS-3103P (ps-3103p) Print Server

1 Answer

Printer Server - Fprgetten Password


If it helps, here is a link to the user manual for that print server. Good Luck!

http://www.edimax.eu/images/Image/product/PS/PS-3205UWg/manual/PS-3205UWg_M.pdf

Jun 15, 2009 | Edimax (PS-3205U) Print Server

1 Answer

No Ports available


The default IP in the D-Link router is 192.168.1.x
The default IP in the Edimax is 192.168.2.2

Your 3rd octet (the # after 168) has got to be the same for the two of them to communicate.
So, you can either reIP your router, or connect your PC to the print server and change it. The software for the print server should have a tool for finding the PS by MAC address, then you can go in and reset it to 192.168.1.x

Sep 17, 2008 | Edimax PS-1206U (PS1206U) Print Server

1 Answer

Can't Connect


I fixed my problem by resetting the print server. You have to hold in the reset button for at least 20 seconds for it to work. I was previously just pressing it without holding.

Hope that this may help someone else.

Regards Jackie Macmillan

Jun 18, 2008 | Print Servers

1 Answer

Cannot configure the wireless USB Print Server


first delte all the programs that u have installed about the print server and the printer.then connect the print server on ur laptop and run the installation .search for the wireless netwrk and connecting to it using the wpa key.After tats done connect the print server to the printer and run the printer installation ,,hope that shud resolve it,,best of luck

May 06, 2008 | Port Incorporated Wireless 11Mbps...

1 Answer

Edimax PS1206 UWG and AVG firewall


Your linksys wireless router has a built in firewall into it.  You should enable that firewall and deactivate the AVG.  Your computer will run faster as well.

Mar 24, 2008 | Edimax PS-1206U (PS1206U) Print Server

2 Answers

Reset edimax print server configuration


try to look for that tiny button around your print serverit is the resetter, it is the same with routers. does your print server comes with a cd installer, if yes install your print servers driver then you can assign your desired configuration for it.

Sep 09, 2007 | Edimax (PS-3205U) Print Server

3 Answers

Photo copier


Please confirgue the print server properly. Assign a particular ip address to it if possible. Then install the photocopier driver in computer and add the network port ip eual to the ip of print server. if it does not work install the print server driver if comes with it as a printer and assign it a ip.

Jun 19, 2007 | Toshiba (GD-1010) for e-studio25S, 16S,...

1 Answer

Edimax PS 3100A+ IP reset


First you must connect to the printer using lpt port. then that server automatically printing its information about it. example: IP address and ...

Aug 08, 2006 | Edimax PS 3100A+ (PS-3100A) Print Server

Not finding what you are looking for?
Edimax (PS-3205U) Print Server Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edimax Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you an Edimax Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...