Question about Zebra Symbol Technologies MC909X-G Series Barcode Scanner

3 Answers

Adapter disabled MOTOROLA MC9090.When scanning for WLANs I get an "adapter disable massage". Any tips on that?

Posted by on

  • trialterror Aug 14, 2008

    Hi Experts



    I cannot seem to get the Symbol MC9090G to get on the network. On warm-booting, it displays the message "Cannot connect due to regulatory issues'. So I wen to options (Scanner) chose 'Regulatory" and unchecked the 'Enable 802.11d' box and pressed save. I then chose menu option 'Find WLAN's, but it returns the error "Scan Error. Adapter Unavailable' . Any help is greatly appreciated.

  • shinaxin Dec 17, 2008

    'Find WLAN's, but it returns the error "Scan Error. Adapter Unavailable' .

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Try a cold boot, then recheck your wirless settings
If that doesn't help, try deleting the Profile and adding a new one. Then walk through all the settings for wirless

Posted on May 05, 2009

Try a warm boot. When in the main screen and power is on press and hold the power button until Symbol screen appears and says warm boot in the top left. Let go of power button. This should reboot system and the network adapter.

Posted on Jul 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please click wiless option then select regulatory next
Check out Enable 802.11d

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need e-toll contact number


Bongiwe

Contact Motorola Solutions. portal motorolasolutions com

Mark
Motorola Mobility Support

Aug 15, 2014 | Motorola MC9090-K DEMO KIT CONTAINS UNIT...

1 Answer

Cannot connect to Motorloa MC9090-G to wirless network due to regulatory issues. All of my connection parameters are correct. Can someone help?


Hello,

please asure yourself, that in Options of the WLAN Fusion Client (icon in the right corner) is the Regulatory set for the correct country.

To be sure, just disable the 802.11d checkbox in Fusion - Options - Regulatory.

Nov 04, 2010 | Zebra Symbol Technologies MC909X-G Series...

2 Answers

MC9090-G wireles->find wlan scan error adapter unavailable


Have the same problem when a DataPhone application was installed bevore. After disabling the application the WLAN device is not working any more !
Do you already have a solution ?
ciao,
Peter

Aug 03, 2010 | Zebra Symbol Technologies MC909X-G Series...

1 Answer

Windows Mobile Symbol Find WLAN error


Warm boot the MC55 if that doesn't help then cold boot it, if that doesn't help then reload the Operating system, if that doesn't fix it then send it back to Motorola for a warranty repair.

Jun 02, 2009 | Symbol MC9090 Barcode Scanner

1 Answer

How do I change the sleep timer settings on a Motorola MC9090


A - From the Windows Mobile user interface:

1. Tap Start (the Windows Logo), then Settings.
2. Tap the System tab.
3. Tap the Power icon.
4. Tap the Advanced tab.

You can change the number of minutes before power is turned off when on battery and when on external power from there. You can also uncheck the "Turn off device if not used for" check box to disable the timeout entirely.


B - From the registry (useful for deploying the setting as a .reg file to the device, in case you have many MC9090 guns you are supporting or you are wanting to set it to a value the user interface does not support):

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"BattSuspendTimeout"=dword:00000000
"ACSuspendTimeout"=dword:00000000

The above values are in hex and represent the number of seconds before timing out when on battery or AC power. For example, to set the BattSuspendTimeout to 180 seconds, you would set it to dword:000000B4. To disable it entirely (the equivalent of unchecking the checkbox in the user interface), set the value to 0.

Thanks,

Brad Radaker
Radicomm, Inc.
(makers of QuickTalk - push-to-talk over WLAN for MC9090)
www.radicomm.com

May 12, 2009 | Zebra Symbol Technologies MC909X-G Series...

Not finding what you are looking for?
Zebra Symbol Technologies MC909X-G Series Barcode Scanner Logo

11,021 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Barcode Scanners Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Brad Brown

Level 3 Expert

13542 Answers

Are you a Zebra Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...