? + 5% = 3885... how do i work out, how much the queston mark is ??

Mary Ames:
1. This is a Q/A Forum. No one has any obligation to answer any question.
2. Questons are not supposed to be answered in minutes.
3. Some questons might be answeres, some not
4. You made two questons about same subject and both were answered. I don't know if in minuts or hour or days.

Now, I answered you THIS QUESTION in minutes. If you have some other question, feel free to make it.
Have a nice time

You can order it here ::

http://www.shopwiki.com/_Eaton+Electical+/+Cutler-Hamm+%23BJ2200+200A+DP+Circuit+Breaker?o=1032164045&s=3885

I also have the same model.Try reducing the brightness and contrast.It worked on my tv.

serial no 1045-0436-9551-0266-5984-9386

make sure you get a tone on the initial base for it to have something to transmit to other stations.

not really a complete wiring change and some sensors it is a head ache unless you have the money and a professional please be careful if you are to try this yourself. We all know the 2.7l has lots of problems. The engine was made for synthetic oil and the dip stick is not accurate. I own four of them. nice cars and the Canadian Built engines as any other engine have bugs that need to be worked out. thank you for your time, Lee Davidian

Your USB memory should be damaged. i have a Centon DataStickPro 4GB that was OK but now i have the same problem. If you know HOW you can try re-format on DOS, but be careful with your harddrive.

By the way, 3885 MB are 3.7GB or so.....

You can try buying another one, SAME MODEL, then the same/next day return the BAD ONE to the store and get your money back.

Most likely your Windows is set for the wrong Region and/or Language.

Check and make changes if need. Here is how....

START > CONTROL PANEL > REGIONAL AND LANGUAGE AND OPTIONS

REGIONAL OPTIONS (tab) set Language and County
LANGUAGE (tab) DETAILS (button) Choose Input Language and Keyboard Region
at this point, if you want to toggle between Languages, click the LANGUAGE BAR (button)
ADVANCE (tab) Choose Language/Country

Yes, I did. Actully for my model it is at the bottom. I used that along with RESET key - which makes 'Hard Reset' - but the same Red screen remains....