Question about HP Compaq Presario SR2150NX PC Desktop

3 Answers

I have an Easycap video capture device which I cant get to work. The drivers seem to be installed properly but when I connect my analogue camcorder using the s video or the video and audio jacks and have it running on playback, the video software provided (ulead ) keeps giving me an error message that no device is connected or no signal is being recieved. I use Vista basic on a late model Compaq preserio. I have tried uninstalling and reinstalling the software but to no avail thank you Tom Amos

Posted by on

  • slitmjst Jun 28, 2008

    thank you I can now get video on the capture screen so I can start trying to figure out the next steps, If I have any problems I will be back
    slitmjst

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 275 Answers

Try using different camcoder and whether it detect or not...

Posted on Jun 27, 2008

  • 1 more comment 
  • LUIS MOBILES MANIPUR
    LUIS MOBILES MANIPUR Jun 27, 2008

    you should install software that is compatible with your current operating system.

  • LUIS MOBILES MANIPUR
    LUIS MOBILES MANIPUR Jun 27, 2008

    use your card device to another system and check whether it detect your camcoder

  • LUIS MOBILES MANIPUR
    LUIS MOBILES MANIPUR Jun 27, 2008

    when you insert your capture device ,see that whether your computer detect it or not.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 1,257 Answers

Check whether it is vista compatible or not..

Posted on Jun 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

I believe that you have to instruct the software from where it should be receiving the video signal. Pls try in your video capture software (Ulead), pls go to the Options menu, click on the Capture Property Settings, Select yourInput Source (S-Video or the Yellow RCA). Other than that, it should be pretty straightforward.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How To Install EasyCap On Windows 7


easycap was not meant to used on windows 7 (i think). but i have uploaded all my easycap drivers for you,.... as always right click exe's and in compatibility mode for windows xp service pack 2. if it still not working after driver install go device manager try update drivers from there.
easycap reccomend - ulead video studio for video editing.
the rar file has no passwords. easycap driver and stuff

Apr 22, 2016 | DekCell EasyCap USB 20 Video Capture...

1 Answer

Easycap video adapter driver will not install on PC from the CD


Goto youtube.com. and search:How to get EasyCap Drivers or http://www.megaupload.com/?d=W64LW1DJ and type in the 3 LETTERS.Wait for the free download on the right side.After I installed the Syntek STK 1160 drivers I still could not capture.THIS STEPS SOLVED IT: 1.OPEN THE ULEAD VIDEO STUDEO PROGRAM 2.CONNECT THE EASYCAP USB DEVICE 3.ON TOP CLICK CAPTURE 4.IN THE MIDDLE CLICK CAPTURE VIDEO.5.UNDER THE WORDS:CAPTURE FOLDER, CLICK ON OPTIONS (THE LITTLE ROUND GEAR OBJECT) 6.CLICK VIDEO AND AUDIO CAPTURE PROPERTY SETTINGS 7. CLICK SOURCE 8. MAKE SHURE TV SYSTEM IS THE ONE IN YOUR COUNTRY 9.CLICK OK.10.A BLUE SCREEN APPEARED AND WHEN I PUSHED THE PLAY BUTTON ON THE DV CAMCORDER I COULD CAPTURE THE VIDEOIMAGE ON THE LEFT SIDE.
WHEN I INSTALLED THE ULEAD PROGRAM I DID SELECT THE TV SYSTEM IN MY COUNTRY(PAL) BUT WHEN I DID STEP. 7, I SAW IT WAS (NTSC).JUST FOLLOW THE STEPS.GOOD LUCK.I SOLVED MY PROBLEM IN 6 HOURS :p

Jan 28, 2009 | Ulead Videostudio 8 for PC

1 Answer

EasyCAP USB video capture device problem


Did you disbale your FIREWALL whilst you installed the driver, I found this most important. After installation enable your firewall again. I had alsorts of problems till I did this. Even so I feel these devices are somewhat unstable

Hope this helps

Jul 06, 2008 | Video Cameras

19 Answers

EasyCap Video Capture


Hi
I had the same problem. No picture and no sound.
Here is what I did to solve it.

1. I Un-installed the software and restarted the computer.
2. Placed the installation CD (that came with the product) back in the CD drive.
3. Click on "Install Driver" (this only installs the USB 2 drivers so that the computer can see the device)

Make sure you do not attach the Easycap Device before you have installed the USB Driver (as above).

4. Once USB Driver has been installed then plug in the Easycap USB Device, windows should then detect the new device, to make sure:-
5. Right Click "My Computer" "Properties" "Hardware" "Device Manager" check "Imaging Device" (which is where my STK1150 Driver was installed) and make sure it has no yellow exclamation mark next to it.

6. Go back to CD and "install the Uplead Software", you then have to Restart the computer.

Once all installed you can then connect your external device VHS Player/Camcorder etc to the Easycap device, using the Red/Yellow/White leads.

I like many before me, tried and I tried to get the image to play on the software "Capture" screen but all to no avail, I was pulling my hair out, I wasted two days on it, I finally decided that this product was a total load of rubbish and I had wasted my money and it had to go.

Then a major break through, some smarty pants made the comment about INPUTS & OUTPUTS, my prayers along with many others could have been answered ??....

I had actually plugged the Red/Yellow/White leads into the INPUT terminals of the external VHS Player, when they should be plugged into the OUTPUT terminals of the external VHS Player/Camcorder.

On a Camcorder the RED/Yellow/White terminals are usually Output terminals but on a VHS Player they are usually always Input only !!....

I tried running my Camcorder through the software and Hey Presto that worked a treat.

So in order to get my VHS to play through the software I ended up having to buy a Scart OUT (very important "OUT") Red/Yellow/White adapter (see link for product image)

http://www.maplin.co.uk/Search.aspx?criteria=scart%20out&source=15&SD=Y

Once all connected I pressed play on the VHS Player and I have to say that nearly fell off my chair "IT WORKED - IT WORKED - IT WORKED"


Sep 30, 2007 | Ulead Videostudio 8 for PC

Not finding what you are looking for?
HP Compaq Presario SR2150NX PC Desktop Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18346 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...