Question about SanDisk Sansa e250 MP3 Player

1 Answer

Refresh database my sansa gets to the "refresh database" screen gets about 1/8 of the way through then freezes and will NOT go any further... what can i do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Get the recovery tool from Sandisk Support downloads. Put it in a file you can easily find.
plug in the Sansa, once it turns on, hold the power button until it turns off then switch the hold switch at the top edge of the player to hold (showing orange) and then hold the "Record" button on the side until the player turns on with a black screen, saying it is in recovery mode.
Some people have said they had to hold both "Power" and "Record" to make it work.
Run the recovery tool software and you should be running again.

Posted on Jun 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sansa e270 freeze if switch on,it indicates,REFRESHING DATABASE"


Having gone over a month with no response, I assume the reset solved the problem.

Jul 08, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

My sansa freezes refreshing database, it will no go any further.


this is kind of a b*****....what u do is only put a 2 or 3 hundred megabytes on the memory card at once.then unplug from computer and let it refresh...if this doesn't work try putting less on memory card...worked for me

Jun 06, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Frozen sansa at refresh database


This is from the Sansa Website at http://www.sansa.com/support/sansa_e200/faqs

My e200 freezes on the “Refreshing Database” screen
STEP 1 – Reset the device
  1. Press the Power button and hold it for approximately 10 seconds.
  2. Release the Power button once the device is powered down.
  3. Turn the device back on.
STEP 2 – Download and Install the Sansa Firmware Updater

I this helps please dont forget to rate my answer.

Mar 07, 2009 | SanDisk Sansa c240 MP3 Player

1 Answer

MY SANSA HAS BEEN STUCK IN THE REFRESH DATABASE MODE AND WILL NOT TURN ON NOR OFF . IT WONT EVEN CHARGE EVEN THOUGH IT IS SHOWING A FULL BATTERY HELPPPPPPPPPPPPPP THANK YOU MRS.C.L.C.


This is from the Sansa Website at http://www.sansa.com/support/sansa_e200/faqs

My e200 freezes on the “Refreshing Database” screen
STEP 1 – Reset the device
  1. Press the Power button and hold it for approximately 10 seconds.
  2. Release the Power button once the device is powered down.
  3. Turn the device back on.
STEP 2 – Download and Install the Sansa Firmware Updater

I this helps please dont forget to rate my answer.

Mar 07, 2009 | SanDisk Sansa e250 MP3 Player

2 Answers

Sansa e260 firmware


Mine was a bit more FUBAR I guess. I have a Sansa e260. I had rockbox on it, went to switch back to the firmware. Uninstalled rockbox and on reboot... the e260 was refreshing the database and then came to a frozen green screen.

My e260 was already in MSC mode. I did the steps above but was still stuck.

The solution that worked was one posted by "Slaughter" on anythingbutipod.

The ultimate fix for all e2xx v1 problems - Format, enter recovery mode, downgrade firmware Link (you'll need to format the drive), reinstall newest firmware via newest Sansa Updater, reload tunes.


Dec 01, 2008 | SanDisk Sansa e260 MP3 Player

1 Answer

"refresh database"


Get the Vista compatible version of the software from Sansa's website

May 24, 2008 | SanDisk Sansa e260 MP3 Player

2 Answers

Refresh database


You can try to reset the device by pressing the power button for about 15 to 20 seconds..if that doesnt work I would recommend you to go to the sandisk site to update the firmware on your device or you can contact sandisk to they can help you with updating the firmware on your device..Please follow the link below to get the firmware
http://www.sandisk.com/Retail/Default.aspx?CatID=1376

The number for sandisk is 1-866-726-3475
Please rate accordingly
Thank you
Computerrep

Apr 10, 2008 | SanDisk Sansa e270 MP3 Player

1 Answer

SANSA e260 will no longer get further than 25% of refresh database & freezes


I would recommend that you update the firmware on the device..Once the firmware is updated you shouldnt have that problem anymore..I hope that helps
Please rate accordingly
Thank you
COmputerrep

Mar 17, 2008 | SanDisk Sansa e260 MP3 Player

2 Answers

"refresh database"


try formatting the hole mp4 *the musik partition only!!* or
try to use the recover mode and reinstall the hole mp4
more information u finds on google....

Jan 16, 2008 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
SanDisk Sansa e250 MP3 Player Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

Gyula Lacz

Level 3 Expert

482 Answers

venugopal durairajan

Level 3 Expert

464 Answers

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...