Question about Office Shredders

1 Answer

Does anybody know the web site for Telko paper shredders? I also would like to know where to find parts Telko model TL2805S paper shredder Thanks Chris ccm1@cinci.rr.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

To my knowledge, Telko, Techko, Dynafold and Dahle brands are all made by the same manufacturer and are branded/sold by:

TechkoUSA.com
Mailing Address: 27301 Calle De La Rosa, San Juan Capistrano, CA 92675
Phone: (949) 218-3010
Fax: (949) 218-3848
Email: support@techkousa.com
Sales inquiries: sales@techkousa.com
General inquiries: info@techkousa.com

Dahle North America, Inc

9 Vose Farm Road Peterborough, NH 03458
(800) 995-1379

DYNAFOLD USA, INC.
7439 La Palma Ave. #200 Buena Park, CA 90620 U.S.A.
Tel: (562) 864-6393 (800) 443-9501 Fax: (562) 864-8008
Email: info@DynaFold.com

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Source for gear for fellowes 301101 DS-1 paper shredder


Replacement Parts - Paper Shredders Can I get my Fellowes paper shredder repaired or purchase parts for it?

The majority of Fellowes personal shredders (small shredders that can fit under a desk) are repairable and will have parts available. If you would like to check your model shredder to determine if parts are available, please click the "Ask a Question" tab above, and advise the model of shredder, the shredder's serial number and a description of the part needed. The serial number will be located on the bottom side of the shredder head below the bar code.

*** Please note: If your shredder is still within the warranty period, we ask that you do not open your shredder until speaking with a Fellowes Representative, as opening the unit may void your warranty.***

Fellowes office/commercial shredders (large shredders that cannot fit under a desk) are repairable and parts will most likely be available. Please do not try to repair the shredder yourself or you will void your warranty. Models included in the office shredder line are 125i Series, 225i series, 325i series, 380 series, 420 Series, and 480 series.

If you would prefer to have a local servicing dealer provide repair service to your office shredder, and would like to find a dealer in your area, please see the below link to search for a dealer by zip code.

http://www.fellowes.com/Fellowes/site/support/support_authorizeddealers.aspx
To order replacement parts, or if your model shredder is not listed, please click the "Ask a Question" tab above to ask us about your shredder. *** Please be sure to include your serial number from your shredder for the fastest service ***

Our office hours are 7:00 AM to 7:00 PM, Monday through Friday Central Standard time.

Jan 22, 2015 | Fellowes Office Shredders

1 Answer

Challenge paper shredder spare parts


You could get a kit depending on the model of the shredder if you searched the internet or going on a well known auction site to find the parts you require.

Aug 13, 2014 | Office Shredders

1 Answer

Spare parts for a fellows p45-c shredder


Can I get my Fellowes paper shredder repaired or purchase parts for it? The majority of Fellowes personal shredders (small shredders that can fit under a desk) are repairable and will have parts available. If you would like to check your model shredder to determine if parts are available, please click the "Ask a Question" tab above, and advise the model of shredder, the shredder's serial number and a description of the part needed. The serial number will be located on the bottom side of the shredder head below the bar code.
Go to
http://www.fixya.com/answer/answerpageslideview.aspx?ctg=176&fml=0&brd=mine&thid=24364827
and 'Ask a Question' give personal details, and that will give you details if spares are available

May 08, 2014 | Fellowes PS8C Shredder

1 Answer

The shredder slows down if more then 2 sheets of paper are put in. The motor sounds like it is struggling and sometimes will overheat and stop. Model # AS662C


I think it has something to do with your gears not working properly, if under warranty you can contact Aurora on their web site and they will help you. If its a part you need customer service can help you at 1-800-327-8508 usa international only 1-310-793-5650

Jun 23, 2011 | Aurora Electronics AS662C Shredder

1 Answer

Looking for troubleshooting manual for Aurora Paper Shredder AS1015CD.


There is a trouble shooting on their web site for Auror!

I was having the same problem with my shredder. I called customer service; I was informed it was the gears on the inside of my shredder. My shredder is no longer under warranty. However, she is mailing me out the part I need for a small fee. Their customer service number is 1-800-327-8508 in the USA and international only 1-310-793-5650. I do hope this help you!

May 27, 2011 | Aurora Electronics AS1015CD Cross-Cut...

3 Answers

Looking for spare parts for a Challenge Paper Shredder model S213


Hi there. I've got the same shredder which I purchased couple of months ago so maybe it's not that olod model after all :) The problem with mine is that the small thing that sits inside and "feels" when you feed the paper and which triggers shredder to operate, has broken in to two. My hubby tried to glue but I don't see any success there. Any chances to get that spare part any where?

Jan 18, 2010 | Office Shredders

2 Answers

The shredder jammed (too much paper) then stopped and won't shred. It makes a noise, but when I insert paper, it won't shred. Is there a reset button? I picked paper out of the blades with a pair of...


Chances are, the overfeed caused the teeth of the gear that operates off of the motor to break.
This is very common in less expensive machines. I don't know if OM will let you return it because I don't know there policy. Most of the time retailers will attribute broken gears to abuse, which in turn is not warranted. These machines are mainly mass produced in China and obviously are very cheap. The labor and part (s) to repair are more expensive than replacing the machine.
If you do, look for a higher quality German machine i.e. Intimus, Olympia, HSM or Dahle. They cost more but they have a nationwide service arena and parts are always available.

Mar 07, 2009 | OfficeMax 0M96431 Shredder

1 Answer

Removal of cover


there's a screw under the novitech sticker , bottom right hand side. btw anybody know where you can get parts/ or a parts manual for this?

Aug 24, 2008 | Office Shredders

1 Answer

4260X


Check the switch (thin shiney metal strip on the side) is in correct position with full flap bar. A schematic drawing at GBC web site can help to locate these parts.

Aug 15, 2008 | Quartet gbc 4260X Shredder

Not finding what you are looking for?
Office Shredders Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Shredders Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

quennie732

Level 2 Expert

393 Answers

Jim Keysor

Level 2 Expert

307 Answers

Are you an Office Shredder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...