Question about Televison & Video

1 Answer

I hook my computer up to the d 1000 and it would not bring up anything. is there some kind of software i need

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

To my knowledge, the RadioShack Cinego D-1000 DLP Projector has a 480p engine giving 854 x 480 maximum resolution. That being so, perhaps you need to lower down your PC's Screen Resolution (and in some instances, likewise the Screen Refresh Rate) in your PC's display properties.

If your PC is a desktop, you may have to activate TV, Twin or Dual view depending how it is connected; RCA, S-Video, or 15 pin HD D-Sub.

If you are using it with a laptop, you may need to enable/activate the external video by pressing Fn + F? keys. The F? differ from brand/model and would normally have a small monitor icon stenciled atop the key.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to bypass my ignition on my 2004 Saturn vue and wire a push button start. Which wires go where?


unless u use key in ignition which is coded to vehicle for --security,ignition,your vehicle will not start===the key gets recognized and the computer than starts vehicle trying to by passing will cause all sorts of problems that the basics the security and passlock technology as well as saftey makes just bypassing anything almost impossible with out disabling the vehicle to point of shut down where you would need to bring to dealer for software hook ups for repairs

Jul 28, 2015 | Saturn Cars & Trucks

1 Answer

I have a new Dell computer, and I have a HP 1209 printer. I hooked it up and it shows it has the main printer but it won't print anything. Do I need to shut it down and bring it back up.


you need to unplug it from the computer, insert the cd that came with it in the computer and install the software and drivers, only plugging in the printer to the computer when the software installation prompts you to. Then follow the instructions onscreen.
Regards...

Jun 08, 2010 | HP PSC 1209 All-in-One InkJet Printer

1 Answer

ROUTER CONFIGURATION


hook computer up to router with the eithernet cable first, then in internet address bar, type 192.168.1.1
Then this will bring you to your router configuration page.
If it does ask you for username and password and you have not set it up yet, then try using
Username: admin
Pass: admin

Jul 27, 2009 | Toshiba WRC-1000 Router (PA3227C1ETC)

1 Answer

I need software for vx 1000 webcam,when but didnt receive


The link below will take you to the MS download page for the VX-1000:

http://www.microsoft.com/hardware/download/download.aspx?category=ICE

Fill in the four fields and download the file. Run the file and follow the prompts to install the camera.

Good luck and kindly remember to rate the help.

Feb 23, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

My hp laserjet 1000 doesn't turn on.


are the leds on at the front?
check the fuse inside the plug

Jan 25, 2009 | HP LaserJet 1000 Printer

2 Answers

Pc Mic and web cam help


No, you don't need to do anything more. That should do it. Logitech also has a webcam with a built in mic that would work for you as well.

Cheers

Jan 04, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Motorola HT 1000 programming cable


Sorry to let you down, but the cable will only function with the appropriate Motorola software (and possibly a radio interface box (RIB) if the cable type you have requires one.) Software is only available to dealers. If you are needing reprogramming, it is generally available for between $25-$40 US.

Nov 17, 2008 | Motorola For MT2000 HT1000 HT6000 GP900...

3 Answers

Ht 1000


a computer with a 286 or 386 processor

Dec 24, 2007 | Motorola HT1000, MTS2000, MTX8000/9000...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72168 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...