Question about Mintek DTV-373-D 37 in. LCD HDTV

1 Answer

Mintex 37 inch wide screen. remote is working however cannot change channel, input source or volum. only turns tv off. The buttone on tv doesnot work connot change input source or volume

The remote only turns TV off and on. Cannot adjust volume or change input source to DVD. The TV buttons soes not work. Cannot change the input source or volume

Posted by on

  • 4 more comments 
  • annellenor Mar 01, 2009

    the problem is clearly NOT with the remote. NONE of the buttons on the TV work except the ON/OFF.

  • bob1225 Mar 14, 2009

    same problem

  • blessbabe7 Mar 21, 2009

    same problem.

  • Anonymous Mar 18, 2014

    buttons remote inputs

  • Anonymous Mar 20, 2014

    The Hisense EN-31603A remote's buttons doesn't work how can I change it back to the origanal source?

  • Anonymous Mar 23, 2014

    Westinghouse LD 3265

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Check if the remote is in TV position, that is, because most of the remote controllers have the feature that you can program them for use with another devices. Make shure that one button that says "TV" in pressed and released once before you try to change any function on the TV.

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there a beautiful picture but no sound and cannot change input?


Re the sound, make sure that the mute switch is not on.

Re the input, did you try changing input at BOTH the tv and remote controls. Could be the remote source button is not working.

Sep 07, 2015 | Haier HL37B 37-Inch 720p LCD HDTV

1 Answer

Tv does not respond to any input only shows nosignal to any device


Did the TV's source get changed? If you use the Television remote and find the source or input button which switches between the video sources for your TV such as HDMI, A/V, Television Tuner,, VGA connector or Component video. If your using a cable box that remote only controls the cable box and possibly the TV power and volume but the cable box remote does not change the source input of the TV. Most Cable boxes rebroadcast their video on a specific TV channel and your TV must be set to that channel to receive the signal from the cable box. Let me know if this helps you out.

Aug 20, 2014 | Televison & Video

1 Answer

How to change input on tv without a remote


Which TV do you have? Some will have an Input or Source button on the front panel. A few will have an option to change the source from the menu. Both of these options require the front panel lock to be inactive.

A few older TVs allowed you to find the A/V input by pressing Channel Down on the front panel buttons until you passed channel 2 (or Channel Up until you nearly reached Channel 2). This option wouldn't work if the A/V inputs had been deleted when someone minimized going through unused channels.

If the Source or Input button was only available on the remote, you will need a universal remote that includes this feature. These cost a bit more than the lowest end remotes. Then you will have to try all of the codes to find the one that makes the Source button work with your TV. (Several codes may work for On/Off but not the change input.) The Universal remotes that can be programmed from a computer (USB connection) will be the easiest to set up. Remotes.com may have a replacement original or substitute remote for your TV that should work for all of the TV functions.

I hope this helps. Please add a comment with the TV make and model for specific options for your particular TV.

Cindy Wells
(low end TVs usually only had the Source/Input button on the remote.)

May 12, 2012 | Sony Televison & Video

2 Answers

Hi, i was trying to turn down the volume on my tv (its an insignia) and i accidentally hit the channel button and i think it messed up the programming of my tv to my cable box. what should i do?


try setting the tv to channel 3 or 4. if that does not work, try finding a "input" or "source" or video" button on the remote and cycle thru them, this should get you back up and running. remember to have the cable box turned on during this so youll see when it comes back on.

Mar 24, 2011 | Televison & Video

1 Answer

Orion TVD2710. Lost remote, can't change signal input


I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv. I hope this helps! -Der Strom

Apr 06, 2010 | Orion STV2763 27" TV

1 Answer

I have a Sharp 32 inch 720p tv, power works, no other buttons do


Unplug TV set from the outlet, wait 30 seconds, plug it back in, select right input with your remote if you using cable box or Punch the channel that you want to watch if you have cable service connected directly to the TV.

Nov 05, 2009 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

LG 37in HD LCD tv not responding to any pressed buttons.


Based on your description, it appears that you have main board issues with your unit since your controls do not work and some inputs are NG.

Apr 24, 2017 | LG 37LP1D 37 in. LCD Television

1 Answer

Tv screen has turned blue and I can't watch tv


i think by accident you have changed the input when you went to change the volume. look for a button labeled " input" or "video" select on the remote and scroll through the various choices. you should get your picture back.

Jan 21, 2009 | Polaroid FLM-3734B 37 in. LCD HDTV

1 Answer

Ds31590


njdb,
Look on the remote for keys that are labled tv/vcr or source or input... In fact, if you go to the front of the unit - that's a Sanyo right - find the grouping of buttons that change the channel, volume etc.. There should be a button marked source or input there.. Press it as many times as it takes to get back to the input source your cable is on...
If you have any problems let me know...
Bill

Nov 24, 2007 | Televison & Video

Not finding what you are looking for?
Mintek DTV-373-D 37 in. LCD HDTV Logo

856 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2307 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Brad Brown

Level 3 Expert

15211 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...