Question about Televison & Video

1 Answer

Hitachi 50UX58B Double vision question?

You posted to someone else with same problem
"If your picture looks 3D and you cant line up the colors your convergence ICs need to be replaced. Post your model number and I will post a link where you can get replacement ICs and get free tech support and instructions so you can do your own repair and save about 400.00"


I too have at Hitachi 50UX58B w/ double vision. I use to be able to hit the tv and fix it so it might be loose connections. Can you point me in the right direction to purchase the convergence ICs I need and thermal puddy? Will this be all I need? Thanks

Posted by on

  • rjla425 Jun 28, 2008

    Thanks , I emailed the site and will wait for there reply. I believe I can do this.

    Richard

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

Yes you can get the new replacement ICs at the following link. The heat sink compound is cheaper at radio shack as its 1.29 for a small tube which is plenty for installing the ICs. The link I am posting will tell you the correct ICs you need for your model if you leave them a email with your model number and yes they provide free instructions and free tech support so you can do the repair yourself. here's the link.
http://servicemanuals.vstore.ca/

Posted on Jun 27, 2008

  • Sonny Berry
    Sonny Berry Jun 28, 2008

    Glad I could help that site will respond quickly to you request. I get all my parts through them and I Moonlight a little by helping them with some of their online support. They have tons of parts available for projection TVs.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture looks 3d colors not lining up


The tv have a problems known as a convergence picture problems.That why ur tv colors lines R,G,B are mis alignments,have colors shadow pictures or have 3D pictures look alike?The tv convergence board it is dead.Tv Convergence board must have it parts like 2 STK convergence ICS and some or all of resistors to be replace too.To fixed the tv convergence board to solved tv picture convergence problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 09, 2011 | Panasonic PT-53WX54 53" Rear Projection...

1 Answer

I cant line the red and green crosses up left and right but i can move them up and down. I have two pics in diferent colors


The tv have a convergence problems,it is dead.Tv have colors lines like R,G,B mis alignments,have colors pictures shadows or 3D pictures look alike?Yes,than the tv convergence board it is dead.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The shop will cost u like $300-350 for parts and labors.

May 09, 2011 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Screen resembles 3D look with predoment red and green to images - did the blue blub burn out and need to be replaced?


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.By replacing all these parts on the tv convergence board to fixed it to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Feb 05, 2011 | Mitsubishi VS-60803 60" Rear Projection...

1 Answer

The picture looks 3D and kind of curving in


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have pictures colors shadows or have a 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Nov 23, 2010 | Sony KP-57WS510 57" Rear Projection HDTV

1 Answer

Screen looks like it is in 3D colors are seperated.


Tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergnce board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 22, 2010 | Toshiba Televison & Video

2 Answers

I have a friend with a Philips 60PP9202 TV, and she describes her problem as: "The top/bottom corner of the picture is kinda waved and the color is blue/red (3D like)". Would anyone have an...


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 15, 2010 | Philips 60PP9202 60" Rear Projection...

7 Answers

Picture is warping and colors are seperating giving a picture that looks like a 3D picture without the glasses


you need to replace both convergence Ics. Post the model number of your set and I will post the correct IC numbers as well as alink where you can get replacements with free instalation instructions. Respond to this same post so I will have access to your symptoms when you post the nodel number.

Jun 30, 2008 | Philips 46PP9302 46" Rear Projection...

1 Answer

Trouble with picture


Can you post a picture of your screen it sounds like convergence ICs. Also need your model number and does the picture look 3D

Jun 19, 2008 | Televison & Video

2 Answers

HITACHI DIGITAL ULTRAVSION HDTV PROJECTION TV


You need to replace the convergence ICs. If you can verify the model number of your set I will post the IC numbers you need and post a link where you can get replacement ics with instalation instructions so you can do the repar yourself and save about 400 dollars

May 20, 2008 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Double vision


If your picture looks 3D and you cant line up the colors your convergence ICs need to be replaced. Post your model number and I will post a link where you can get replacement ICs and get free tech support and instructions so you can do your own repair and save about 400.00

Apr 10, 2008 | Zenith A50M84W 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5339 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...