- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you do firmware?
In most case when I do firmware upgrade with pioneer DVD, I can´t fix the problem.
Now you have trouble with chip on your DVD burner, the best solution is bay another, because you can´t try again firmware upgrade.
Only what you can do with dvd or cd rom is cleaning or change a laser, but you have diferent trouble.
i have the same problem ,but when i restart my pc ,i put the disk it can read without a doult .The problem is your disk drive can't read disk when it on windows mode ,using dos and it just fine,some kind of trouble appear cause i burn too much disk in a time and it can't read next time i open computer .May be your windows problem just restart wins then put the disk in ,if it appear the green light it mean it's reading then the green light off it's mean it had identify the disk and does read it
I have a Pioneer DVD-RW DVR-K16D. It worked just fine a few months ago. Now I can only burn CDs and not DVDs. I get an error message about windows titled 'problem copying'. Any suggestions? Thank you and happy holidays.
if you have had two drives with the same problem i would check the ide cable and swap to another one if you have a master and slave twin connector ide cable, or even try the dvd rom on the same ide cable as the hard drive as you know that that ide connector and cable is working, unless you have a SATA hard drive in which case you won't be able to; but will still have a spare ide channel connector to try the drive on.