Question about Infinity PS-10 Subwoofer

1 Answer

PS-12 subwoofer problem - Infinity Customer Support number?

My PS-12 sub powers on but has NO sound...Everything was working fine and no one fiddled with any of the wires...I'm thinking its the amp thats gone bad.

Can anyone tell me the number for Infinity customer support so I can see if this sub is still under warrenty?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fixed the problem...I just purchased another one online (from a store that has a good return problem) and will return the one that doesn't work! Cheers! :)

Posted on Jun 27, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Once my sub warms up it makes a noise which occurrs every 8-10 seconds apart. It sounds like an amplified ark


You should power the system off right away when you hear that because the thermo shut down does not kick in. The temperature will eventually damage your semiconductors and capacitors and the system will be completely damaged. You need to ventilate the system better and even upgrade the heat material if you can.

Sep 24, 2011 | Infinity PS-12 Subwoofer

1 Answer

Does not power up


i have a similar problem:
my problem is that my sub doesn't power on when i put sound on my amplifier, then i have to power on manually the sub, but how it doesn't detects sound, it comes power off after 15 min.

May 15, 2011 | Infinity PS-8 Subwoofer

1 Answer

When I Connect the LFE Output of the Amp to the LFE Terminal of SW, the SW does not work, however, if the speaker output of Amp is connected to SW, it works ok.


Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Infinity-PS-12-Subwoofers-manual/id/21470dj882/t/2/

I'm assuming your amp for testing was NOT a subwoofer output. I could be wrong.

Your source is responsible for creating LFE output. Are you sure it's doing that?

Tune an FM station and connect any other active RCA output from the source (like a Tape Out) to the sub

Mar 05, 2011 | Infinity PS-12 Subwoofer

2 Answers

My infinity ps 12 sub blows the inturnal fuse when pluged in ?


make sure you have the right size fuse T3 15 amp L/250V

Feb 25, 2011 | Infinity PS-12 Subwoofer

1 Answer

My Infinity sub-woofer for my home surround sound system will not turn on. The power light wont even turn on. What can I do to repair this? It seems that no electronic place with repair infinity speakers...


Open it up and see what is in there! You might find a fuse blown. It might have just blown, without a fault, if you are lucky. If not check out the part numbers on the amp board. All semiconductors numbers, then put the numbers into google. You will soon find out if they are obtainable!

Jan 19, 2010 | Infinity PS-10 Subwoofer

1 Answer

PS-212 Suddenly stopped working


I HAVE 4 PS212 AND FROM WHAT YOU ARE DISCRIBING SOUNDS SIMILIAR TO WHAT HAPPENED TO ME. PLAYING THE SUB AT FULL VOLUME AND CLIPPING OCCURED NOT KNOWING THAT THE FAINT SMELL WAS THE VOICE COIL BURNING AND CONTINUING TO PLAY UNTIL KNOW SOUND LESSON LEARNED BUY A BIGGER SUB SYSTEM OR REPLACE YOUR SUB WOOFER.
IN MY OPPINION THIS IS A VERY GOOD PRODUCT WHICH I HAVE BEEN ABUSEING FOR MONTHS . SO QUIT WHINEING AND PAY YOUR DUES.

May 30, 2009 | Infinity PS212 Subwoofer

1 Answer

Infinity PS-12 amp clicking on/off


I have the same problem as well...

Mar 29, 2009 | Infinity PS-12 Subwoofer

1 Answer

Infinity ps-10 powers up but no boom


Try hooking up a different signal input to your powered sub, another stereo or even a dvd players audio output to the sub will work for a test. Just make sure the subs gain is down before starting. If it still not producing sound, the subwoofers amplifier is bad. I hope this helps.

Oct 10, 2008 | Infinity PS-10 Subwoofer

3 Answers

Infinity PS-12 Subwoofer clicking in and out of standby


Hello,
Unfortunately your subwoofers amplifier circuitry will need to be repaired ,the amplifier is bad and kicking in to protect mode. This mode is designed for safety of the unit and user and sub should not be operated until repaired as it may incur more damage to the components. I hope this helps.

Feb 18, 2008 | Infinity PS-10 Subwoofer

1 Answer

Infinity PS-10 quit working


I think the electronics have a 3 years warranty and the drivers have a five years warranty for this product, maybe you can have it replaced. Maybe the auto on/off signal detector is the culprit.

Dec 09, 2007 | Infinity PS-10 Subwoofer

Not finding what you are looking for?
Infinity PS-10 Subwoofer Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infinity Speakers & Subwoofers Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Infinity Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...