Rival juice a matic parts

I tried to locate the manual with google, but unfortunately had no success. You could ask some specialized Rival manuals with the search engines, like here or manualsparadise.com. The services are not for free, but most times worthy - saved my live more than one time...

You can contact Waring at 1 800 492 7464 or just google Acme
juicer parts. Tip-Omega shredder blades are cheaper.

The solution i have found is relatively simple, but going to take a bit of handy work.
first, it would greatly help to remove the bottom from the unit. You will need to remove the 4 rubber pads, and then the 4 screws. 2 of the screws are way up there and need a thin philips.
Regardless if you removed the bottom, you will need to drill a hole right in the center of that circular grill on the bottom piece.
If you did NOT remove the bottom piece, I would take a nail, clamp it with vice grips, get it red red hot off the burner, and burn away that center plaster to create a hole. So whether you drilled the hole (with the bottom removed) or burned the hole (with the bottom intact), you will see the bottom of the motor has a slot head.
Now, all you need to do is take a thin blade screwdriver, or thin butter knife into that slot, holds the motor, then twist the blade right off...or on...whichever the case may be.
Hope this helps...sure helped me!

Just google Acme juicer parts. The new lids are a tight fit and
have to be filed down if you're handy.

It's called a foot ring. Just google Acme juicer parts or contact
Waring at 1 800 492 7464.

TRY INVERTING IT AND SOAKING IN A
SOLUTION OF OXI CLEAN AND HOT WATER.

i think its wrong that you want me to pay 10.00 to find out what type of grease to use in my antique juicer

This model has a recall on the extractor you might contact them for a new one. http://www.cpsc.gov/cpscpub/prerel/prhtml02/02041.html

I HAVE LOST THE BOOK AND PAPERWORK TO MY RIVAL JUICE EXTRACTOR MODEL 965. IS IT POSSIBLE TO GET ANOTHER BOOK AND PAPERWORK FOR IT?

Hi there,

I also have a Juicelady, & need a part(s) HEre is a probable solution to your problem!

In the U.S.A. or Canada call 1-800-233-9054 to order the part. Or see if they have it in stock.They will ask for your address & phone number. Have your serial number ready-it should be on the bottom (or possibly the side) and you may need a magnifying glass to read it! It starts with the letters JL, and mine was JL500 (so look for that-but your may be a different model, I gave you mine so you have an idea of what to look for.)

Note: Anywhere else, or to check them out online:

The same warehouse is also at foxinternational.com if you'd rather see what they offer that way--but we got our call answered after waiting les than a minute. They even had the part we require but won't ship to Canada, so if your Canadian--call anyway, as it is a different part than we required,( the arms that brace the unit together.)

Hope this was helpful for you!