Question about Lexmark T630 Laser Printer

4 Answers

Cleaning clean a t630

Posted by on

  • jd630 Jun 26, 2008

    how to clean a t630


4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

There has a good house cleaning product-- magic sponge. magic sponge just need water and don't need detergent , strongcleaning capacity,saving time ,energy,convenient. The most distinguish with the traditional cleaning sponge is that the magic melamine sponge adopts physical cleaning principle. During cleaning, it can automatically absorb the stains on the surface. It is like countless superstrong mini cleaners working together.

Where to use?
Clean up car interiors, leather chairs, mirrors, seats, steering wheel, household appliances, wood surface, wall, doors, and floors, sofa, athletic shoes, purse, plastic surface, cups, etc.
How to use?
You should know the correct way to use the magic melamine sponge. The more appropriate you use , the longer it can be used.
Step1:put magic sponge soaked in clean water.
Step2:gently squeeze excess water.
Step3:gently wipe the need to clean the parts.
Step4:after wiping up the dirt with a dry cloth.
Step5:will use the magic of the sponge into the water after soaking, don't have to rub, dirty can dissolve out, repeatedly used again.

En world sales magic eraser sponge En world dedicated cleaning sponge...

Posted on Oct 15, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Expert
  • 43 Answers

Geelong Commercial Cleaners provides a number of specialised cleaning and restoration services in the Geelong region. Services include carpet steam cleaning, low moisture cleaning, rug cleaning, fabric and leather lounge cleaning and protection, tile & grout cleaning and sealing, water/ flood damage restoration, mould remediation, structural drying.

House Office Carpet Residential Commercial Cleaning Geelong Commercial...

Posted on Jun 10, 2016

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you clean a lexmark t630. I have the same pattern smudges on the left side of the page

Posted on Aug 29, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi, I received a solution from Jackpot00, but I am still getting smudges. Please help! I have a Lexmark T630 and I am getting smudges on the left side of the paper. I removed and cleaned the charge...

I have had this issue many times with the T640 printer. The two are similar enough that if you follow the attached video to disassemble the printer, you should be able to take a can of air and blow everything out. Do not replace the fuser kit, just clean yours with a can of air and place it back in the printer. Once all components are clean and reassembled, run a few test pages to see if the print has cleared up. I have had to run as many as 25 pages to clear out the loose toner in the printer after cleaning. You might also try a new toner cartridge.

Hope this helps.

Aug 29, 2011 | Lexmark T630n Laser Printer

1 Answer

202 paper jam, but no paper is in the printer.

The printer don't pick-up the paper, the cause is dirty roller. You can clean pick-up roller with a wet cloth (water is enough or alcool).

Apr 18, 2011 | Lexmark T630 Laser Printer

1 Answer

My lexmark T630 is no longer printing and i dont know why?

if the problem of your printer is can not print because of the software you need to re installed and run the software again to access the server.if the problem is printer only check all the set up is correct then try to test run if it was printing. paper tray must be proper place and clean all the sensor. ink cartridge make sure proper installed and timing belt is not worn out.

Apr 14, 2011 | Printers & Copiers

1 Answer

Just replaced an OEM T632 with a reman. Black line down the left side of page. And it's on the back of the page also. Any suggestions

probable build up on the toner drum or a "sticky" spot on the silver bar on the toner drum, leading to build up of toner at that spot. Take the toner apart and clean.

Feb 11, 2011 | Lexmark T630 Laser Printer

1 Answer

Duplex tray jam

Chjeck your paper feed rollers, clean or replace.

Jan 04, 2011 | Lexmark T630 Laser Printer

1 Answer

I have a lexmark T630 and the fuser needed replacement, now the printer will print just fine with one problem. On every page that prints out there is about 2in from the left side of the paper light print....

Light print is usually caused by a bad charge roll or transfer roll. Can also be caused by a bad HVPS, which I hope is not. But try cleaning the charge roll. Check the transfer roll, it may have shifted all the way to the left. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

May 06, 2010 | Lexmark T630 Laser Printer

1 Answer


first you take out toner cartridge and see if paper is jam in fussing unit otherwise open the back side door and take out fussing unit and clean the paper jam

Feb 05, 2010 | Lexmark T630 Laser Printer

3 Answers

Error 32 Unsupport Print Cartridge Lexmark T630

on the inside of the top cover on the left side when the door is open there is a little switch youll see a little metal tab 5/16'wide push on this and see if the error clears. if it does this can be adjusted. if not pull the cartride out there are two sensors on the right inside one close to the front this is an optical sensor blow this out with canned air if you dont have an air compressor. then further back inside there is a two pin sensor make sure that if you push in on these that they dont stick. next there is a smart chip on toner caartridge that lines up with those pins when its installed clean these contacts. doing all of these things usually geets rid of the problem. no parts have been replaced recently right? check the connector to the logic board this is theeonly 3 pin connector that has black and white wires. this sohlud fix your problem

Nov 24, 2009 | Lexmark T630 Laser Printer

3 Answers

Lexmark T630

If you are using the Postscript driver, switch to one of the PCL drivers. Either PCL or PCLXL.

If you are using PCL, switch to a different driver.

If all of the above fail, send me a Print to File so I can debug it.


Apr 07, 2009 | Lexmark T630 Laser Printer

Not finding what you are looking for?
Lexmark T630 Laser Printer Logo

1,068 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides