- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your universal remote should have a code search feature that allows you to search through its library to find a code or codes that will work. You might need two separate codes for the TV and the DVD player.
It sounds like you would like to re-assign one of the function buttons on the remote to control a different device. If you would like to program the CBL/SAT button to control a DVD player, here are the steps:
On the remote, press and hold SET until the LED blinks twice, then release SET.
Enter 9 9 2. The LED will blink twice.
Press DVD/VCR once.
Press CBL/SAT once. The LED will blink twice. The CBL/SAT key is now ready to be set up to control your DVD player.
To setup the CBL/SAT button to control your Magnavox DVD player, follow these steps:
Turn on your DVD.
On the remote, press the CBL key once.
Press and hold SET until the LED blinks twice, then release SET.
Enter the first four-digit code from the following list: 0503, 0675. The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
Aim the remote at the DVD and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.
Magnavox VCR. The Phillips universal remote lists the following codes:0330, 0430, 0534, 0324, 0224, 0124, 0247, 0230, 0125, 0093, 0598, 0830. Doesn't seem they have much control of which code gets used on which model. Start in the middle and work both ways to the ends. Make sure to post back which one you find that works.
You most likely will not be able to find a code for it because it is an off brand (not-so-well known brand) and most universals will not have codes for that brand. if your universal remote doesnt have codes for the Mintek brand or has them and they dont work then, sorry that remote will not work for you. you will need to try and get a different one. or try and get the original remote. you can try finding the original remote at ReplacementRemotes.com by typing in the model of the Mintek DVD player. or you can try Ebay.