I have a 2001 grand jeep grand cherokee can i fit a double din radio in it

ask dealer or junkyards.

i [iece of Plexiglas, use a piece of card board to measure out the area and cut it to size. install and mare the area the radio will fit in. cut that out. now you have a template in your hands. take this to the shop your getting the Plexiglas from and have them cut it for you to shape. and put a piese of tint on the back (black works great or titanium". now remove the radio, remove the dash shield, install the plexi, hot glue will do or drill a few holes and screw it in. install the radio and dash shield. There you go a fully customized system.

hallo. ich brauche der radio code fuer meine grand cherokee.

Your radio is shot. You can get a new one on Ebay.
Note that you can get the Jeep grand cherokee radio, it will fit

yes

i have a 2002 ford escape and i bought a double din radio and it did not fit and found out it is actually a din and 3/4 with out serious mods (cutting a bigger hole in dash) double din wont fit i bought a single din stereo and a din a 3/4 dash kit works fine

Hello kierravander,

No, the dash openings are different sizes. The Ford uses what's termed an "Iso-DIN" opening whereas the Jeep uses "Euro-DIN. Both the width and the depth are different, and the the Ford being deeper than the Jeep, you may end up with a couple of inches of radio left over when it's fully pushed into the opening.

There are many dash kits available to adapt most aftermarket radios to most any make and model of vehicle. There's not any adapters that I know of to adapt one vehicles OEM radio to another make and modelof vehicle.

The radio will work OK. It's just that it'll be a lot of work and the finished result will probably resemble a "Rube Goldberg" add-on.

Single din is smaller, double din will fit better in your truck.. What radio are you looking for ?? Not to step on anyones toe's but I can help you out, I can prolly get you a better deal.. hit me up if you want.. [email protected]

http://www.jeepforum.com/forum/showthread.php?t=670463