Question about Canon imageCLASS MF4270 All-In-One Laser Printer

2 Answers

Canon Printer MF 4270 has NO MAc software but Windows only.

Why??? I am sitting here with a Canon MF 4270 printer but no software and after laboriously searching the net for the past 3 hours I still have nothing. The box clearly states it is compatible with Mac 10.2.8 and up!

Posted by on

  • 2 more comments 
  • shapsy Jul 25, 2008

    having the same trouble with the scanner...no way

    rs


  • Anonymous Aug 23, 2008

    Call the tech support. They will walk you through installation or even send you an updated Mac disk if needed.

  • mtthwbrnd Dec 07, 2008

    I bought an MF4270 on the basis that it is advertised as being Mac compatible. IT IS NOT MAC COMPATIBLE. Sure, you can get it to work with limited features after days of frustrating driver installing, network setting and calls to technical support... but it will not do duplex properly (mine only prints a few pages then decides to stop) and you cannot use the scanner. It is also *way* slower than advertised.

  • Zepa Dec 22, 2008

    Where does your printer prints the fax report?

    On the top of the page or in the middle?

    Mine prints on the middle, and it really bugs me. I cannot configure it otherwise, and Canon says is not configurable (but they didn't said if it was supposed or not to print on the middle)

    Tks.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 424 Answers

Alternative driver download link: Canon imageCLASS MF4270 Multifunction Printer Driver

Posted on Jan 28, 2010

  • Chinkwop
    Chinkwop Dec 09, 2011

    This is for Windows NOT Mac!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 565 Answers

Try downloading here - http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&modelid=15753 - also choose the right operation system on top

Posted on Dec 27, 2008

  • Chinkwop
    Chinkwop Dec 09, 2011

    No scan driver!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get canon imageclass mf 6540 to scan


Such printers with scanners built into them are know as Multi Function Printers. It is possible you have downloaded a 'printer only' or generic printer driver software.

Here are the links to the 3 bits of software you require:
1
http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0100242106EN.htm

2
http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0200155901EN.htm


3 (only for 64 bit windows 8)
http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0100114601EN.htm

3 (only 32 bit Windows 8)
http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0100114501EN.htm

May 05, 2014 | Canon ImageClass MF6540 Copier

2 Answers

Cannot find driver/software for my dusty Canon imageCLASS MF3240 on mac OS 10.7 Lion?


There is no driver for your printer to work with OSX. It was for Windows OS only. AND Apple does not support this particular model either.Link below list support printers by Apple OSX>
http://support.apple.com/kb/ht3669

Jan 08, 2013 | Canon imageCLASS MF3240 All-In-One Laser...

2 Answers

Canon mf 3240 laser printer driver for mac


According to the HTC website HTC sync is not compatible with the Mac. I have found the following webpage that appears to be a piece of software that allows you to do this see http://mac.eltima.com/htc_sync.html Hope this helps.

Nov 03, 2011 | Canon MF3240 imageCLASS Laser...

1 Answer

I want to down load the driver for canon multifunction mf 4270. the cd received along the printer has got broken so i want it to load on a new pc


You can find your driver on Canon's website located at http://www.canon.com. Find the section marked "drivers and software" and then enter your make and model of printer. Download the files to your computer and install them before connecting the printer for the first time.

Nov 28, 2010 | Canon imageCLASS MF4270 All-In-One Laser...

1 Answer

I have windows vista X64 and can't find software for canon mf toolbox


I called Canon support; this is a known issue, and the workaround that worked on Windows 7 x64 was to use Windows Fax
& Scan (Start > All Programs > Windows Fax & Scan.

Mar 12, 2010 | Canon ImageClass MF5770 Laser Copier...

1 Answer

I require cannon g3 laser printer image class mf 5550 CD DISC


download the software from usa.canon.com

http://www.usa.canon.com/opd/controller?act=OPDDownloadIndexAct

Jan 21, 2009 | HP LaserJet 3300 All-In-One Printer

Not finding what you are looking for?
Canon imageCLASS MF4270 All-In-One Laser Printer Logo

Related Topics:

1,374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...