Question about Emerson EWC27T3 27 in. TV/VCR/DVD Combo

2 Answers

Emerson EF 2703 - Infrared Beam is not functioning

Any thoughts on repair of an Emerson EWF 2703 - infrared beam is not functioning. I have replaced the remote exact duplicate and still does not function. Tested remote device against the raidio for the "hum" measure of functioning - and it is.

John Dryfhout
June 26, 2008

Posted by on

  • humperdink00 Sep 01, 2008

    I have the same issue with a EWF 2702. I have verfied the issue is not with the remote. Even universal remotes will not work.


2 Answers

Having the same problem - don't know if it can be fixed!

Posted on Sep 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having this same issue with an Emerson EWF 2702. Did you find any resolution to this. Do you know of a way to change the video input on the tv when you cant use the remote?


Posted on Sep 01, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have Dick Smith LCD TV DVD?TV combination. Model number GE6607. The remote control has stopped working. When you change functions you must press the OK button to get the DVD to play. Given that the DVD...

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Nov 03, 2014 | Televison & Video

1 Answer

I have a EWC20D3 Combo that does not respond to remote.

Check the remote control for its infrared emission first. Check it with fresh batteries. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2350 posts now. All are related to electronic equipment repair help. If you check the site in Timeslide option, which can be selected from the dropdown list at the top left side of the display window, it will make search easy. Detailed description about how to check and repair a remote control is given in detail by one among the posts.

Apr 18, 2013 | Emerson EWC20D3 20 in. TV/DVD Combo

1 Answer

Remote not working

Check the soldering points at the infrared LED of the remote. You have to open to acces this point. If fould loose soldered, resodler that point by applying a little more solder. If it d not help you check the remote control for its infrared emission. You can get all details about how to repair and chec the remote control by entering the folloing blog site.


please insert dots in place of [dot]s mentioned above, and google for it. Will display a site named "Electro-Help". You can see details here.

Apr 08, 2012 | Disney Princess TV/DVD Combo

1 Answer

Is there such a thing as buying infrared Sensors for a TV having problems trying to buy one

Most likely the problem is with the remote. The infrared LED transmitter in the remote could be weak. If the remote only works when it is close to the TV then it is faulty.
Try replacing the batteries first, the maybe flat.
When you replace them and you still have trouble operating the TV and it only works at close range then you can purchase an infrared LED transmitter form an electronics parts store and replace the this LED in the remote.
NOTE the LED is a polarised device and only work if inserted correctly.
The LED will have a small flat surface on the rim of the LED next to the shorter leg wire is the K (cathode) - lead, the longer leg wire is the A (anode) + lead. Make sure it is fitted to the circuit board the right way around before you solder the LED to the circuit board.

Apr 03, 2012 | Televison & Video

1 Answer

Remote control not working properly

Please check & ensure the infrared is emiting from the remote control. Though we cant see this infrared beam with bare eyes, there is a trick to do so in Most of the problems is weakened infared beam. Replace the batteries when needed. Hope this fix the remote control problem.

Jan 18, 2010 | Mintek DTV-263 26 in. TV/DVD Combo

2 Answers

Infrared receiver doesn't wokr

Call Andrews Electronics and give the make, model number, and the circuuit board location (label printed in PCB next to IRreceiver). To check if your remote is transnmitting, point it a digital camera (cell phone camera will work just fine) and look at the screen on the camera while you press the buttons on the remote. The infrared light will appear as white on you camera display.

Sep 13, 2008 | Televison & Video

1 Answer

Remote control

how can i reprogram my remote to my dtv-373-d hdtv

May 17, 2008 | Televison & Video

1 Answer

Missing plastic circle: remote doesn't function

If the remote sensor cover is missing on the TV, the remote would still work but you may get other effects like the TV changing channels on it own.
This is due to stray infra red signals.
If it's not working at all I would suspect the remote control handset.
You can test it by pointing it at a digital camera lens and watching the display screen on the camera.
You should see white light comming from the remote when you press any of the buttons if it's working.
Digital cameras can see infrared.

Mar 13, 2008 | Televison & Video

1 Answer

Infrared light out, power light out

notice if your buttons on the tv work properly. sometimes the curcit board that holds the lights,ir ect, falls off from inside and then they cant be seen or work

Jun 04, 2007 | Apex Digital GT2715DV 27 in. TV/DVD Combo

1 Answer

Remote does not work

Most likely since you dropped the remote than it stopped working, It is most likely the remote. Some universal remotes say they have the code for your television but they do not. Because lots of different manufactures make televisons under different names. Try a better universal. If it does turn out to be the piece in the television, You will probably have to have it serviced by a professional

Jan 08, 2007 | Emerson EWC1902 19 in. TV/VCR Combo

Not finding what you are looking for?
Emerson EWC27T3 27 in. TV/VCR/DVD Combo Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71006 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers


Level 3 Expert

4706 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides