Question about Televison & Video

1 Answer

I have an RCA universal remote and I need a code for a Bell ExpressVu satellite in order to use the remote for both my TV and Satellite.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 260 Answers

004 was the only code I could find for Bell but i do not think it will work. Therefore, i recommend the following:
Programming a Device using Code Search:


  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Posted on Jun 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SHould AN RCA RCU400E. RCA RCU404N UNiveRsal Remote AuTomatically WorK. On an RCA P56950 model TV without the codes?


No,only the original tv remote that design for that tv model will work only for that tv without a universal codes.All universal remotes have to have a codes enter to program it to make work for the tv dose not mater same model or simular.All the rest same model of tv or simulair tvs the original remote only 50/50 should work,some fuctions just not there or just don't have it.

Aug 14, 2011 | RCA P56950 56" Rear Projection Television

1 Answer

Picture on screen is too big head of people are cut off it does not show complete picture


Use your cable or satellite tv remote to adjust the aspect ratio. If you have cable there is a button on the remote called hd zoom and it has this symbol: #. On the satellite tv remotes it usually says format or aspect. You might even have to go into the cable box/satellite tv receiver menus to adjust the aspect ratio/picture format. Once you have done so you can fine tune the picture even further with the television remote's wide/format/aspect/zoom button. Also check and make sure your television is on the right input and that your cable box/satellite tv receiver is set at the right resolution for the television 1080p/1080i/720p.

Jul 12, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

I need a remote code for a rca remote for the olevia remote control can you help


Unfortunately Olevia is one of those t.v. brands that is not compatible with many universal remote controls. They make a Universal Learning Remote specifically available from Olevia on their web site that may solve your problem if your universal remote control turns out not to be compatible with your Olevia television.

As for what codes you can try, there are many, and the codes depend on your universal remote control brand. Many times, an RCA code will work for Olevia televisions, so you should try the RCA codes that come with your universal remote first, before trying any of these other codes.

If you have a Dish Network Universal Remote you can use code 506 or 127.

Direct TV remote codes vary by model number on the remote control, but the following codes work with most Direct TV remotes: 506, 127, 11144, 11240, 11331, 11610

Cable Vision use code 506

Charter and Movie Box remotes you can use 1144 or 1178

Comcast codes are 11144, 11240, 11331, 21075, 10159, 10154, and 10088

Cox code is 1610

Brighthouse remote codes are 1610, 1144, 1240, and 1331

Time Warner remote codes are 1610, 1144, 1240, 1331, 432, and 1610

If none of these brands are what you are looking for as far as your Universal Remote Control is concerned, many universal remote controls will work with Olevia televisions if you use the codes found under the RCA, LG, Phillips, and Yamaha in the code listing included with your remote control.

Jul 25, 2009 | Televison & Video

1 Answer

Cannot program tv using bell satellite remote


Turn your TV on.
Press and hold the TV mode button until all the other mode buttons light up.
Press the blank POWER button. (If your remote only has one POWER button, press that one)
Press the UP ARROW button repeatedly until your TV turns off.
Press the POUND (#) button to confirm.


Cheers

Feb 01, 2009 | Hitachi 50FX30B 50" Rear Projection...

5 Answers

I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote...


Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Oct 23, 2008 | Televison & Video

1 Answer

How do I install a channel to receive satellite programmes? My model is LE19R8


If you have a satellite and it is connected with coaxial cable put the set to channell 3 or 4. If the satellite is connected with RCA cableput the set on that source the cable are connected to. No need to program the set. Use the cable remote to change the channels just use the tv remote to turn the set on and off and for volume.

Aug 19, 2008 | Televison & Video

1 Answer

Cant find the code to set to my tv


here's a link to the manual in pdf format: http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&md=urc43304devicebigeasy&kw=&st=&ar=&dt=&so=&pg=2&file=others/one_for_all/urc4330-manual.zip

Jun 29, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Problem with HD feed from satellite receiver


I just had my HD DTV installed this weekend, you have to leave it on 480p. I too purchased my tv in 2002. Per DTV, its an older model and you have to stay with the 480p to get the best possible picture. I have to admit, don't know what the 1080i looks like, but 480p is showing me a very good picture. Best I have ever seen on my TV.

Jun 27, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

I have a sanyo t.v. with no remote. So I purchased a RCA universal remote for it, we have DirectTV as well. I went to rca.com/codefinder and retrieved the code for RCR311W. What I need to know is what do I...


May be you can help me to, I bought a UNIVERSAL REMOTE
SuperScan and I have not been able to locate the codes to program my unit, which is a TV/VCR/DVD.

Thanks

Mar 12, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69739 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...