Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Cartridge not detected

We have done that and changed the chips several times but the machine will still not recognise the cartridges. Minolta say tough you should be using brand new cartridges not remanufactured ones.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers

If the printer says toner not installed, then you have a dirty chip reader, remove pc drum and all toners, use pressure air to clean chip reader under the toner rack at right side and reinstall everything.

Posted on Jul 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printers


Cartridge not recognised
This model printer may only let you use genuine = printer cartridges. If you try to refill these ink cartridges it will not work because the cartridges have an embedded chip in the cartridge that detects the empty cartridge even though it has been refilled.

Apr 22, 2013 | Printers & Copiers

2 Answers

I have replace the yellow color cartridge on my HP Photosmart C6100 several times and it still says its empty.


clean the metal pins on the ink cartridge amd the pins in the printer were the ink cartridge geo's

Sep 15, 2008 | HP Printers & Copiers

1 Answer

I just refilled my black ink cartridge.But the ink is still not recognised. Every time I hit print it just shows that the ink can't be recognised. What shall I do?


If you refilled the cartridge, most likely the wafer chip on the ink cartridge is a self setting chip. What this means is once the ink runs out one time, the chip will either short or change a pattern to allow the cartridge to never work again (so you have to go out and buy their new ink) Some places sell a chip reset, or you can replace it will an OEM black ink.

If this all fails, than the print head (the carriage the ink sits in) is faulty

May 22, 2011 | Canon PIXMA iP1300 Printer

1 Answer

Printer doesn't recognise new ink cart


Dear friend,

Try changing another new cartridge with just one you replaced.If it's working then problem with the cartridge,not then there may be a problem with the printer Logic board or cartridge detection chip.

Mar 11, 2011 | Epson Stylus NX400 InkJet Printer

3 Answers

Printer won't recognize cartridges


I am an IT tech in Education we only use compatibals I use a chip resetter from Ebay just type Chip Resetter for Espon and you are sorted for around a £10, this unit works on most epson 5&9 pin cartridge
regards
John

Jan 14, 2009 | Epson Stylus CX6000 All-In-One InkJet...

4 Answers

Canon MP510 wont recognise cartridges


Using replacement cartridges that come without a chip seems to be the problem I had with the Canon Pixma 510 printer they are cheaper
but if they do not show the ink levels then its inconvienent so I have but Canon products with a chip and they work perfectly.

Nov 11, 2007 | Canon PIXMA MP510 All-In-One InkJet...

1 Answer

"Can't Detect Genuine Toner Cartridge"


minolta printers work on "chips" if the chip atached to the cartridge is not original minolta you better change it.

Oct 28, 2007 | Konica Minolta PagePro 1350W Laser Printer

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...