Question about ASUS NVIDIA nForce Chipset A7N266-VM (A7N266-VM W/L) Motherboard

1 Answer

CHASIS TEMPERED I HAVE TRIED ALL THE SOLUTION FOR THIS PROBLEM BIOS DONT HAVE OPTION TO DISABLE CHASIS OR NO SECURITY OPTION PLEASE I HAVE STRUGGLE NOW FOR 3 WEEKS TO SOLVE THIS

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

PUCH UP THE FOMATTRE TELL IT 1. 4. 2. C. THEN IT WILL B OK!!!!!

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO ENTER BIOS


Hello, I am the technician that will be assisting you today. My name is Norman-Wynne Damstra.

Welcome to Fixya, Isagani C. Capitle.

Turn your computer on and then tap the delete key repeatedly to enter the BIOS. This is done during the Power On Self Test, the first few seconds when a computer is powered up.

Then once in the BIOS you will have to navigate to the option for chassis intrusion. Disable it or reset it if necessary.

Save and Exit.

Take care!
Norman-Wynne Damstra

Dec 25, 2011 | ASUS COMPUTER INTL P5SD2-VM MBD MATX LGA...

1 Answer

Cmos checksum bad Chassis Intruded Fatal Error System Halted!


Hi,
To remove CMOS Checksum error, you have to remove the coin cell battery from the motherboard and install a fresh one. A coin-cell battery (CR2032) usually powers the real-time clock and CMOS memory. The battery is 3 Volts, 3/4" in diameter and has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery.
Just open the desktop, locate the CMOS (Coincell) and remove using screw driver. Replace the battery with CR2032 or an equivalent one.The following brands are used interchangeably for this item: Energizer (ECR2032), Duracell, Panasonic, Eveready, and 3M etc, which can be purchased from any local electronics store.
For Chasis Intrusion msg, go to the BIOS (when prompted, press the Function Key at the system startup) and locate the option of chasis intrusion option and disable it, save settings. Commonly, to enter the BIOS you have to press F2, F10 or DEL Key, depending up the make/ model of the PC you have.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Oct 08, 2011 | Motherboards

1 Answer

System intruded, or tempered, or the chasis are opened before. please check the system


There is a chassis switch that detects when the desktop case has been opened. You can reset this switch in the BIOS configuration so that this message doesn't appear until the case is opened again.

Oct 31, 2009 | ASUS P4SE Motherboard

1 Answer

Asus k8s mx mother board problem


To get rid of this message at boot you must turn off the Chassis Intrusion detector feature. To do this you must restart the computer, as it boots press DEL to enter BIOS.
Under the SECURITY tab in BIOS select CHASSIS INTRUSION and select DISABLE.
Then select EXIT and SAVE CHANGES and OK to reboot the system.

Jan 31, 2009 | ASUS K8S-MX Motherboard

1 Answer

Hello


There is a setting in the bios to turn off the chasis intrude alert. I don't know what board you are using, but usually enter the BIOS by tapping 'DEL' or by pressing F2 immediatly after switching on.
You obviously are a stranger to the BIOS, so "DO NOT CHANGE ANYTHING ELSE THAT LOOKS LIKE IT COULD DO WITH CHANGING" while you are in there, just look for and alter tis setting and NOTHING ELSE...

BluRay

Sep 07, 2008 | ASUS P4S800-MX Motherboard

1 Answer

Error message


There is a micro-switch which detects when you remove the lid.
This can be disabled in the BIOS menu.
Switch on and press F2 or DEL key until you get to BIOS Menu (may ask for password).
Then find security menu and disable intruder alarm enable.

Aug 17, 2008 | Motherboards

1 Answer

Tower change


1. Restart your machine
2. Enter BIOS by pressing F2
3. Scroll down to 'System Security'
4. Press Enter
5. Scroll down to Chassis Detection
6. Arrow over to 'Disabled'
7. Press Escape
8. Save changes and exit.

In some bios is in bios in the section BOOT and BOOT SETTING CONFIGURATION and disable CASE CHASSIS WARNING.

Your bios may be slightly different from the above. check inside the settings and find the case chassis warning option.

Regards

Mar 29, 2008 | ASUS NVIDIA nForce Chipset A7N266-VM...

1 Answer

Disabling Onboard Video


no you dont need the jumpers or some from there...just before booting your OS,go into the bios field.
there you will find the option you must set to disable.
the exact point youll find it I cant tell you because bios are different from board to board..depending of the manufacturer..just surf the bios,youll find it and disable it
good luck bye

Feb 07, 2008 | Biostar P4VMA-M Motherboard

Not finding what you are looking for?
ASUS NVIDIA nForce Chipset A7N266-VM (A7N266-VM W/L) Motherboard Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...