Question about PC Desktops

1 Answer

Disable notepad from accessoires

How to disable notepad from accessoires in local user.

Posted by on

  • Anonymous Sep 22, 2008

    I want disable notepad from my pc

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 148 Answers

If you are just trying to prevent access to notepad delete the icons. If you still have your install or recovery disk you can insert it and remove the application that way... Good luck... Be mucho blessed...Mark

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Enable / Disable the Local (Hidden) Administrator Account in Windows 7


Ways to Enable / Disable the Built-In Windows 7 Admin Account Many people familiar with prior versions of Windows are curious what happened to the Local Administrator account that was always created by default. Does this account still exist, and how can you access it?<br /> Recently I ran into an awkward situation where after disjoining a Windows 7 client machine from the domain, I was unable to log in to the computer. This was not because I had forgotten the local administrator password, but because the local administrator account was disabled (which is the default behavior in Windows 7). Like in Windows Vista, in Windows 7 the built-in Administrator's account is disabled by default. Furthermore, this account is not associated with any password. After doing some research, I found the following procedure that worked really well.<br /> <a href="http://www.windowspasswordsrecovery.com/enable-disable-local-administrator-account-win7.htm">Enable Built-in Administrator Account</a><br /> Basically there are 4 ways in order to activate the account:<br /> A) Command Prompt To enable the built-in Administrator's account by using the Command Prompt please follow these steps:<br /> 1. First you'll need to open a command prompt in administrator mode by right-clicking and choosing "Run as administrator" (or use the Ctrl+Shift+Enter shortcut from the search box)<br /> <img src="run-command-prompt-as-administrator.jpg" /> 2. After that you only need to enter the simple command below to activate it.<br /> <b><i>net user administrator /active:yes</i></b><br /> <img src="enable-hidden-administrator-account.png" /> 3. You should see a message that the command completed successfully. Log out, and you'll now see the Administrator account as a choice.<br /> <img src="built-in-windows-7-administrator-account.png" /> You'll note that there's no password for this account, so if you want to leave it enabled you should change the password.<br /> B) Local Security Policy Another way of activating the administrator account in Windows 7 is via Local Security Policy.<br /> 1. Type secpol.msc in the search bar and hit enter.<br /> <img src="secpol.png" /> 2. After the Local Security Policy pops up, navigate to Local Policies-&gt; Security Options where you can see an entry that reads Accounts: Administrator account. Double click the entry to enable it.<br /> <img src="local-security-policy.png" /><br /> <img src="administrator-account-status.png" /> C) Using the Local Users and Groups Snap-in To enable the built-in Administrator's account by using the Local Users and Groups snap-in please follow these steps:<br /> 1. Open Local Users and Groups. You can do so by typing lusrmgr.msc in the Start search box or in the Run command and pressing ENTER. Or, you could open Computer Management by right-clicking Computer in the Start menu and selecting Manage.<br /> 2. Expand System Tools &gt; Local Users and Groups &gt; Users.<br /> 3. Right-click the Administrator account and select "Set Password".<br /> 4. In the"Set Password for Administrator" click "Proceed".<br /> 5. In the"Set Password for Administrator" enter the Administrator's desired password twice, and click "Ok".<br /> 6. Next, enable the Administrator's account. Right-click the Administrator's account and select "Properties".<br /> 7. Un-chek the "Account is disabled" check-box. Click on the "Ok" button.<br /> Administrator's account is now enabled and configured with a password.<br /> D) During the Installation Process There is a 3rd method which advanced users can use. This method can be used during the installation process itself.<br /> 1. During the installation, after being prompted to configure the new user account, you will be able to set the new account's password.<br /> 2. At that phase, press SHIFT and F10 keys together. A Command Prompt window will appear.<br /> 3. In the Command Prompt window, type:<br /> <b><i>net user</i></b><br /> Note how the Administrator account is there, yet the new user account has not been yet created.<br /> 4. To set the Administrator's account password:<br /> <b><i>net user *</i></b><br /> 5. Then enter the required password and confirm it.<br /> 6. To enable the Administrator's accoun:<br /> <b><i>net user administrator /active:yes</i></b><br /> 7. Close the Command Prompt window and continue with the installation process.<br /> If you log off you will now see the Administrator's account as a valid logon option.<br /> Disable Built-in Administrator Account Make sure you are logged on as your regular user account, and then open an administrator mode command prompt as above. Type the following command:<br /> <b><i>net user administrator /active:no</i></b><br /> <img src="disable-local-admin-account.png" /> The administrator account will now be disabled, and shouldn't show up on the login screen anymore.<br /> <a href="http://www.windowspasswordsrecovery.com/downloads/Windows_Password_Recovery_Tool_Trial.exe">Hack into Windows 7 Administrator Account </a> [Free Trial] Article source: http://www.windowspasswordsrecovery.com/enable-disable-local-administrator-account-win7.htm<br />

on May 23, 2011 | PC Desktops

Tip

How to Use Qfixapp.exe In Windows XP


This article describes the Quick Fix utility (Qfixapp.exe) that is included with the Application Compatibility Toolkit for Windows XP and Windows .NET. Qfixapp.exe is a tool that includes pre-packaged fixes that provide an easy way to fix a program.

Use Qfixapp.exe To Apply Program Fixes

You can use Qfixapp.exe to quickly apply various program fixes (AppFixes, also known as "shims") to a program to determine their effectiveness. Qfixapp.exe reads the %SystemRoot%\windows\apppatch\sysmain.sdb database to produce a list of available fixes. When you select an AppFix, you can start the program executable (.exe) file, and the AppFix will be applied. If a suitable AppFix is found, the tool eventually helps you to generate and test matching file information. When you run Qfixapp.exe, you see the following items:
  • The The application for which to apply the fix(es) check box. This setting disables existing fixes in the database.

  • The Layer tab with the Choose one of the existing layers to apply to your app box that contains the following entries:

    256 Color
    640X480
    Disable Themes
    Internaltional
    LUA(Limited User Account)
    LUACleanUp
    NT4SP5
    ProfilesSetup
    Win2000
    Win95
    Win98

  • The Fixes tab. On this tab you can select the individual fixes that you want to apply.
Example of How to Use Qfixapp.exe 1. Start Notepad, and then click About Notepad on the Help menu. Note that the version is 5.1.

2. Start Qfixapp.exe, click Win95, click Browse, and then open the Windows folder. Note that the Windows\System32 folder is protected by Windows File Protection, so it is not able to use the layers.

3. Click Notepad.exe, click Open, and then click Run.

4. Start Notepad, and then click About Notepad on the Help menu. Note that the version is now 4.0.

If you click ViewLog, you could see what AppFix(es) are being used. If you click Advanced, you could see information about the .exe file. You can click Add Matching Info, and then select files that are related to the .exe file to identify that particular program. After you finish that step, you could click Create Fix Support to add the layers with the Matching Information (GRABMI) and create an XML-based database that is named YourAppName.sdb. Note that in the preceding example it is named Notepad.sdb, and is in the AppPatch folder.

on Jul 03, 2010 | PC Desktops

1 Answer

Why do i have to change my paswort all the time?


You might have it set to change at certain intervals
IE: at log in or after each restart .......

Disable password log in
On both PC and Mac computers, you can set up your system to automatically log in to a certain user account.
As a result, this setting will allow you to bypass the password login that is typically required.
You should only enable automatic login on your computer if it cannot be easily accessed by other people.

Open the Start menu and click on "Run."
Type "control userpasswords2" (no quote marks) into the dialog box and press the Enter key.

Uncheck the box next to "Users must enter a username and password" and click on the "Apply" button.

Enter the username of the account you want to automatically log in with and then type that account's password twice to finish setting up automatic login.

Click "OK." Password login has now been disabled.
Mac Instructions

Open System Preferences by clicking on the Dock icon.

Go to the "Accounts" control panel under the "System" heading.

Click on the "Login Options" button at the bottom of the window.

Select the account that you want to automatically log in with from the "Automatic login" drop-down menu.
Password login has now been disabled.
also
Depending on what operating system you have, there are several steps you must take in order to disable the administrator account and password on your computer.
Most often, the administrator account and password are disabled in order to minimize security risks on your computer.
This account is often the target of attack if your system is compromised, as it allows access to all of the data and programs on the computer.

In order to disable the administrator account and password, follow the steps below that are outlined for the major operating systems.

If you are using Windows XP, you must be logged on as the administrator in order to disable the account settings.
Microsoft suggests that you set up another account with administrator permissions in the event that you may need to reverse this process.
Otherwise, you won't be able to.
Right-click on the My Computer icon on your desktop and select manage.
Click Users under Local Users and Groups in the left pane, which will bring up all users on the computer.
Double-click Administrator and on the General tab, check Account is disabled.
This will disable the Administrator account and password for Windows XP users.
In Windows 2000, go to Start, select Programs and go to Administrative Tools.
Click on Local Security Policy.
Next, click on User Rights Assignment under the Local Policies option in the left panel.
Double-click Deny access to this computer from the network and then click Add under Local Security Policy Setting.
Click Administrator account under Users and Groups, then click Add.
Click OK to complete the disabling of the Administrator account and password.

In Windows Vista, the Administrator account is automatically disabled.
However, if you have enabled it, you will need to open a command prompt.
Go to Start Menu, click All Programs, select Accessories and right-click on Command Prompt and click run as Administrator.
Open the command box and type net user administrator/active:no. Press enter and you should receive a prompt stating the command was completed successfully.

If you are running a Mac, the Administrator account is enabled by default.
To disable the account and password, go to the Apple menu, click System Preferences.
Choose Accounts from the View menu and click the lock to authenticate with the administrator account password.
Click login options, click edit, and after clicking the lock in the Directory Utility window, click Disable Root User from the Edit menu.

Aug 04, 2013 | PC Desktops

1 Answer

Num lock


If you use the number pad frequently during your daily computer usage, you may want to have the "Num Lock" key enabled when the computer starts up.
You can enable Num Lock automatically in two different ways: one involves modifying a value in the registry and the other requires you to create a small script in Notepad.
Activate Num Lock Through the Registry
Enter the registry and navigate to "HKEY_CURRENT_USER\Control Panel\Keyboard\." Double-click on the value labeled "IntitialKeyboardIndicators," which has a value of 0,1 or 2.
Change the value to "2" to turn Num Lock on after logon, "0" to turn Num Lock off after logon and "1" to disable Num Lock.
Create a Num Lock Script
Configure a script that runs to automatically change the Num Lock state.
Depending on where you place the script, you can activate the script for a single user or all users on the computer. Open Notepad and paste the following code
"set WshShell = CreateObject("WScript.Shell")
WshShell.SendKeys "{NUMLOCK}"
Save the file as "numlock.vbs," including the quotes to change the notepad file to a script.
Paste the file in the directory "Documents and Settings\All Users\Start Menu\Programs\Startup" to enable Num Lock for all users by default.
For a single user, copy it to their startup folder instead of All Users.
Enter the BIOS
Enter your computer's BIOS before Windows boots up to change the integrated Num Lock settings.
Depending on your motherboard manufacturer, different key combinations allow you to access the BIOS.
Common keys include "F1," "F2," "Del," "ESC" or "F10."
Consult your computer's documentation for specifics.
Navigate through the basic or advanced options until you find a section dedicated to enable or disable Num Lock on boot.
Enable in Linux
Linux is an alternate operating system.
While the BIOS method may work for Linux, you can also change the process through the options if using KDE Linux.
Navigate to "Control Panel" and click "Peripherals." Select "Keyboard" and select the option "Turn on" under the heading labeled "NumLock on KDE Startup."

How to Set the NUM LOCK State at Logon in Windows XP
http://support.microsoft.com/kb/314879

How do I enable the NUM LOCK key for the logon screen
http://support.microsoft.com/kb/154529

May 15, 2013 | Compaq PC Desktops

Tip

How to disable user account control in windows 7


It is very easy to deal with UAC Settings in windows 7.You dont need to completely disable UAC, if you really dont want to do. Here is the step to be followed to disable UAC in windows 7 Step


1: Access UAC settings by typing UAC in the start menu or control panel search
OR
Go to start -> Control panel - > user accounts

ff06935.jpg

bc64982.jpg
Once you double click on user accounts you will get a window like below. There double click on Change user account control settings option

4d75dba.jpg

Now you will get options to change user account control settings. You can move the slide to 4 different posiotions according to your choice. The first is more secure and the last means its disabled


b4e80d3.jpg

2b9aebc.jpg

3f4c1bc.jpg

28e65bb.jpg


Disable UAC via Registry Editor
1.Type regedit in the Start -> Search bar. 2.GotothefollowingKey:HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionPoliciesSystem 3.Locate REG_DWORD: EnableLUA
4.Set the value of EnableLUA to 0.
5.Locate REG_DWORD: ConsentPromptBehaviorAdmin
6.Set the value of ConsentPromptBehaviorAdmin to 0
7.Restart


Disable UAC via Group Policy
  1. Type “gpedit.msc” in the Start -> Search bar.
  2. Double-Click: Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.
    b8e500d.jpg
  3. Locate: “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” and modify to “Elevate without prompt”
  4. .Locate: “User Account Control: Detect application installations and prompt for elevation” and modify it to “Disabled”
  5. Locate: “User Account Control: Run all administrators in Admin Approval Mode” and modify it to “Disabled”
  6. Locate: “User Account Control: Only elevate UIAccess applications that are installed in secure locations” and modify it to “Disabled”
  7. Restart.

on Mar 03, 2010 | PC Desktops

Tip

Allowing Network Access with Blank Passwords with Vista


Although you can log in locally without a password, by default, Vista does not allow network users to access the computer without a password.
To change this setting:
Run gpedit.msc
Go to Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options
Double click on Accounts: Limit local account use of blank passwords to console login only
Disable this option

on Feb 07, 2008 | HP Pavilion a1410n (ER890AA) PC Desktop

1 Answer

Every time i open my laptop I get this- error loading C:\Users\elisa\AppData\Local\Temp\hgGvspmm.dll The specified module could not be found WHAT DOES IT MEANS?


ok
go to run then type "msconfig" then go to startup then disble this named chek box if u could not able to find this then disable all starup.
but make sure only disable statup

Nov 10, 2008 | HP PC Desktops

1 Answer

Disable programs icon from start menu


Right click on it and delete

Note : Still the program will be on the computer

Jun 25, 2008 | Compaq Presario 5000 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...