Question about Philips Universal PH301S Remote Control
I have a philips universal remote control but los the code list I did have it once but I lost it. please help me
I went to the Phillips website and I wasn't able to find a code list. However, I did find the instructions to program your remote with "code search". Basically, it might take some time, but you can program your remote without the code list.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jun 26, 2008
Tips for a great answer:
Feb 22, 2012 | Philips Remote Controls
Jan 22, 2011 | Philips Magnavox Learning Universal Remote
Aug 24, 2009 | Philips SRT9320/10 Prestigo 20-in-1...
Feb 12, 2009 | Philips Universal PH301S Remote Control
Jan 14, 2009 | Philips PM335 Remote Control
Dec 13, 2008 | Philips PM335 Remote Control
May 21, 2008 | Philips PM3S Remote Control
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: