Question about Frigidaire GLTF2940ES Front Load Washer

4 Answers

E20 ERROR CODE - Frigidaire GLTF2940ES Front Load Washer

Posted by on

  • 8 more comments 
  • Anonymous Jul 10, 2008

    E20 err code comes on in middle of cycle and cycle will not finish. I have tried restarting the cycle and it gets partly done and will not finish. If it does comlete the clothes are not spun out comletely and remain too wet to put in dryer.

  • tairilynn Sep 08, 2008

    Same thing happens to mine!!! HELP!!!

  • Anonymous Sep 13, 2008


    1. The E20 code comes on in the middle of a cycle and then it it will not drain completely or spin close out.

  • mmkwelch Sep 14, 2008

    Please help with E20 error.

  • boomerang769 Dec 03, 2008

    error 20

  • billdugas Dec 05, 2008

    What does it mean?

  • hdmechanic Dec 14, 2008

    Does anyone have a diagnostic code chart for this?

  • mcasiano4 Dec 19, 2008

    e 20 code

  • tonyanjanes1 Jan 03, 2009

    where the fliter at

  • Anonymous Feb 04, 2009

    i keep getting E20 error code

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Plug off the mains. First drain out all your water by lowering the exit hose into a bucket or drain. You have to look for screws below the front kick-panel, the panel comes down & out. The pump is on the right side. Be prepared for dirty water. Inside the big flexible tube (coming from the tub bottom) is the filter, be prepared to find all sorts of junk here, clean out. Examine your pump also, clean out the impeller. Carefully refit all. Your machine would be fine. Don’t wait for the machine to jam to look into your filter.

Posted on Mar 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My front load washer has an E20 error code that will not allow my washing machine to finish the spin cycle. How do I fix this error?

Posted on Sep 18, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It means that machine isn't able to drain. Either check the filter, make sure the house drain isn't clogged, or if the hose is kinked.

Posted on Dec 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My frontlad gives e20 code

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E20 Error


Hello Diane Snow, thank you for your inquiry!

I understand that your Frigidaire washer is displaying "E20" error code. The "E20" error code means water is not pumping out fast enough. First, you want to check the hoses for restrictions.

If the hoses are not restricted it could be an issue with the drain pump or control board. I would suggest seeking assistance from a professional technician for proper repair. I hope this is helpful. -Matt

Oct 06, 2014 | Frigidaire Washing Machines

1 Answer

Gltf2940es3


good day,
no idea for the E20 error coz all brand have diff error code?
call the service center what the exactly the E20 error?
check in the manual for the error code most of washing machine if the error code is in users manual its means its only minor problem,but if the error code is not in users manual its means you need to call an service technician to not waste your money or time if you do by your self.

Nov 01, 2013 | Washing Machines

1 Answer

Frigidaire front load washer (ATF6000SF1) error E20


E20 is not an exact error code. It's indicating a possible pump out problem. Here is a few possible causes of an E20 error code:

1. Restriction in the drain pump

2. Failed pump

3. Water not pumping out fast enough (crimped drain hose)

4. Too many suds ( too much detergent or wrong kind)

5. Pressure switch (not communicating with control board)

6. Loose wire at pressure switch

7. Loose wire at pump or control board

8. Failed control board

Nov 29, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

I have a Kenmore Elite washer, model 44092. The machine won't spin and the error code is E20. What is wrong with it?


The machine, based on the error code, is made by Frigidaire for Kenmore. Error code E20 pertains to a slow or no drain problem which can be due to a clogged/kinked drain hose, blocked drain filter/coin trap, or a broken drain pump. The link below provides the detailed troubleshooting procedure of this error code.

Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

Aug 20, 2011 | Washing Machines

1 Answer

E20 message want spin


E20 is not an exact error code. It's indicating a possible pump out problem. Here is a few possible causes of an E20 error code:

1. Restriction in the drain pump

2. Failed pump

3. Water not pumping out fast enough (crimped drain hose)

4. Too many suds ( too much detergent or wrong kind)

5. Pressure switch (not communicating with control board)

6. Loose wire at pressure switch

7. Loose wire at pump or control board

8. Failed control board

Apr 29, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Error code E20 comes on during a wash cycle. i


If the filter is clean and the hoses are free of obstructions,you will need to replace the pump

Oct 18, 2009 | Washing Machines

1 Answer

E20 code. Not draining


E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

Jun 06, 2009 | Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

AEG Lavamat Turbo 12830 - error code E20


Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Mar 21, 2009 | AEG Lavamat 16810 Front Load Washer/Dryer

4 Answers

Zanussi Electrolux ZWF 1430 W (E20 error)


Check water "forreign object trap". It's under the lid at the bottom of the machine. First drain water by pulling out the hose and pull out the plug. Then unscrew the trap. Have had this E20 error twice. First it was two coins there, next it was a big paperclip. Have worked fine ever since.11_20_2011_8_57_27_am.jpg

Sep 26, 2006 | Zanussi ZWF1430W Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

Related Topics:

1,692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...