Question about Televison & Video

1 Answer

My bush lcd26tn006hdx tv will not turn on the red LED just flashes

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 63 Answers

Hi Gunney,

I've had the inverter play up on these sets. Try the set with the inverter unplugged and if you get sound its almost certainly the inverter. You might also see a very dark picture as the screen will be working but the backlight wont be lit.

Be very carefull with the inverter, theres some high voltages there.

If it is the inverter you should be able to order one from an ASWO stockist. That will be cheaper than from Bush / Alba.

Posted on Jun 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV turns itself off, then on automaticlly


The fan should run for a few minutes after shut off to cool the lamp down.

If I read and understand correctly somewhere in the cycle you are getting 5 red blinks? that is an error code........

Either you or I can Google the model number of the set with 5 blinks.....or visit the Sony site to see what it means.....

Apr 24, 2012 | Sony KF-42WE620

1 Answer

PT54DL50


MOST LIKELY problem is the convergence amps but.....
It might be your vertical or horizontal circuit...those initiate a 3 blink failure code too....

Dec 01, 2007 | Panasonic PT-50DL54 50" Rear Projection...

1 Answer

Hello. My Panasonic PT-50LC13 is not turn on. First flashing green light for one minute on the power button then starts to blink red and at the same time it starts blinking red LED lights every five...


Check ur tv fan,if ur cooling fan are runnig,before all these LED lights are flashing.If not that ur tv problems.All these LED lights are flashing the tv making alots of clinking noises too like it trying turn itself on?Yes,than the tv board that called the Ballast board it is dead too,must be replace also.This tv Ballast board only job are to help to ignite the tv projection lamp only and keeping it on and running.

Aug 29, 2011 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Panasonic projection TV does not turn on.


Power LED flashes orange 1 x 5 secs. = 1 of 3 fans stopped. TEMP LED flashes 1 x 5 secs, = Temperature error. Lamp LED flashes 1 x 5 secs. = lamp ballast error. (check lamp 1st.)
Hope this helps.

Apr 18, 2010 | Televison & Video

1 Answer

Hitachi 60sdx88b


The flashing red light means that the tv is in protection mode. The tv will not turn on when the red LED is flashing. The most common problem for Hitachi are the convergence output ic's. But they useually do not cause the LED to flash. This tv does also have a problem with Q777 going bad. This will cause the LED to flash. If Q777 is bad the horizontal circuit needs to be modified. This must be done by a tech.

Nov 20, 2008 | Hitachi 60SDX88B 60" Rear Projection...

1 Answer

Power up Problem


my hitachi model number:55fx48b suddenly just stopped. I can unplug the tv, then turn it back on and red led light will come on for 2 seconds and shuts back off! Can you please help me

Jun 28, 2008 | Hitachi 55FX48B 55" Rear Projection...

1 Answer

Mitsubishi 55 inch 1080 tv


Is it flashing a two digit code such as 34 as thats a common fault with the WD52525 V26 chassis for a lamp abnormality caused by two bad capacitors on the PWB PCB

Jun 17, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

TV turns off aftering powering up. red LED flashes 3 times.


3 red blinks means th lamp door in not on. if you have installed the lamp door corectly and it still does this solder all three pins together on the door switch.

Oct 08, 2007 | Sony Grand WEGA KDF-42WE655 42" Rear...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...