Question about Motorola Phones
To change the time you need to press the 'Prog' button, then press the * key twice, so '**' then enter '1234' then enter '000' then press the 'enter' button (located bottom right hand corner of phone) and this will allow you to change time accordingly.
To change extension name, press 'Prog' button, then press the * key twice (as above), then enter '1234' then enter '000', then enter '004' then press 'enter' button (as above), this should then get you to the spot where you can change the name.
Posted on Feb 01, 2008
Have your system admin movethe extensions ports. You have a definity or S87xx series.....that is the only way.
Posted on Jun 14, 2008
SOURCE: NEC Dterm80 Name change
OK, I got this from somewhere else. But anyways, pick up the phone and dial 700, then dial the extension number, then finally you can punch in the name like you would doing a text message. When you're done, hit Hold, hang up, and hit Speaker twice.
Posted on Sep 05, 2008
To Program an extension name:
1 Press the TRSF key and dial 104
2 Enter the name using the dial keypad like you are texting
When the next character you want appears on the same key press the volume UP key to move the cursor on space to the right.
To make any changes press the volume DOWN key to move the cursor to the left .
If you want lower case letters press the A key brfore entering letters.
3 Press the TRSF key to store the name
Posted on Dec 18, 2008
When the "check phone line" message appears, it is referring to telephone service and not the wire. It appears that your phone jack is "dead" or that there is no working service in the home. Do you have another phone that you can use to check the jack? Is there another jack that you can plug the phone into for a test?
Posted on Nov 21, 2009
Tips for a great answer:
Mar 05, 2011 | Uniden Cordless Phone
Nov 28, 2010 | Phones
May 18, 2010 | Phones
Apr 06, 2010 | Uniden Cordless Phone
Mar 18, 2010 | Phones
Aug 29, 2009 | Uniden DECT 6.0 Cordless Phone ID
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: