No sound on scart 1 to tv . on model:DVDR5520H

What type of TV, IE: Make and Model. If you have a SCART socket, then you can probably use the audio output connections on the SCART cable to connect to your stereo.

One thing to check is that your TV isn't muted! I know it sounds silly, but lots of people have inadvertently muted their TV's and not realized it.

HI if you mean scart connectors on rear of DVD recorder, try swapping scart inputs on DVD recorder and if no joys then on set top box. (some units have 1 input designated for TV and the other for Set top box input)

Two things. 1 Scart. 2 VCR head dirty.
The biggest cause of sound but no picture is the scart lead. The pins often fail to make a good connection and so leave you with sound only. Solution is to replace the scart lead, the better quality the better.
2 If you are playing a video and get no picture, the cause is dirt, clean the head with Servisol Video 40.

How have you connected the VCR..vis Scart or UHF cable?
Has your tv got more than 1 scart socket if connected this way.If so, have you tried using a different scart inputon the tv?
Has the tv got picture and sound when vcr is not connected?
All these answers help with the diagnosis :)

Tried all combinations of scart connections and channel settings ,without result.Finally connected an external freeview box to VCR AV2,with through aerial feed to TV.Setting TV toEXT-1 and VCR to AV2 and with scart to phono adaptors connected box audio and video "out "with phono leads to audio video "in" using an adaptor into the TV scart socket.

1) Connect the red, white & yellow audio leads in to the 360 scart adapter and then plug this in to the scart socket on the tv
2) change the xbox 360 selector at the back of the console from HD to TV
2) Select the input of scart on the tv

You should now get pictures & sound.

do have sound and picture at same time you will need a fibre optical cable, you connect that from your cinema system to your tv. then you need to set your cinema system to digital input or fibre optic or check by pressing aux on your remote and see which is the right one. i am not familier with panasonic as i have samasung.

YOU CAN ONLY GET 5.1 FROM THE OPTICAL OUTPUT ON THE SKY BOX NOT THE HDMI
SO CONNECT YOUR SKY BOX OPTICAL TO TV OPTICAL

PLZ LET ME KNOW IF THIS HELPS
JonnieC

Hi.

Ok here goes.

1) Take airial lead from the wall socket in to antenna in on freeview box.

2) connect short usually black airial type lead in to antenna out socket on freeview. plug the other end of this lead in to aerial in on vcr.

3) connect the other end of this aerial type lead to airial plug on the back of tv.

4) now if you have 2 or more scart sockets on the back of tv set plug in the scarts in this order.
Freeview box scart with tv on it connect to scart 1 on tv set.
Freeview box vcr scart connect to vcr in scart socket on vcr.
Vcr scart marked tv plug scart from here to scart 2 on tv
If you have 3 scart sockets on tv you can connect dvd using scart to scart socket 3 on tv.

If Tv has only 1 scart the aerial leads will stay the same as I have stated,
Freeview must go to scart socket on tv set.
leave second scart from freeview to vcr plugged in so you can record freeview by putting vcr to line 1 or AV 1.
you will need to put tv on channel (0) & tune this channel to the video play a tape that you recognise then go to tv tuning & tune tv untill you see video playing then store this on channel (0).
DO NOT USE AUTO TUNING IT WILL PUT CHANNELS IN THE WRONG ORDER JUST USE MANUAL TUNING.

Now to view Dvd you will either need to purchase A scart switch box. Or have keep unpluging freeview scart from tv so you can plug in dvd .

If your tv has red yellow white phono sockets you can plug dvd in to these, you may need to purchase phono leads.

Hope this helps.

http://dysonmanuals.llc.nu/

Chris..

If you have a later Philips home cinema model: HTS3100, 3300, 3500, 3154, 3357, 6510 & others, the sound from the TV will go through the existing scart connection.

Just select TV on the home cinema remote control.

For any other models, use a scart - twin phono lead (red & white), from the TV to one of the inputs into the home cinema.

Scarts 1 & 2 on the TV will have different results. Try both.