Question about Broderbund Printmaster Silver 12.0

1 Answer

Deleted project i have printmaster 12 and I went into my document folder and deleted an unwanted "project with a photo ..... the photo AND the project are now gone BUT it still shows up in my printmaster project folder. It turned out that is the ONLY picture that I have and I NEED to somehow print that project that has the photo. Is there ANY WAY to print even though the project was deleted in "my document" folder. this was all done a while ago on an older computer and I was searching the computer for any wanted and unwanted files before i got rid of the computer . it is the ONLY most recent picture of my childrens grandmother and their father (she is now past way) THANKS FOR ANYONE WHO CAN HELP Mary

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Does the image still show on ur printmaster

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my Printmaster Siver 12 cdrom with a used one. How do I change the default printer setting?


"Add printer" select your new one and set as default.
You can delete the old one from the printers folder.

Dec 10, 2014 | Broderbund Printmaster Silver 12.0

1 Answer

Won't open project


Hi there there is no problem The first things you do you need to Type %temp% on start run and hit enter it will drop you in Temp folder where you will find loss of unwanted files just delete them and then go one folder above that is windows then delete all temporary files in temp folder and prefetch files in prefetch folder .
check if your project drive have enough space to cache or you can go to the preferences and change the cache folder and all should be cool ....
if you face any issue please don't hesitate to ask me .
if works my solution please grade me.
regards
Dushyant

Jun 30, 2013 | Adobe Photoshop 6.0 for PC

2 Answers

Since changing to Foxfire from IE I can not open my Print Master Gold 12


Try re-installing the Print-Master Gold so the istallation can "detect" your new browser. Be sure to back up your data files / folders related to PrintMaster.

Dec 31, 2010 | Broderbund PrintMaster Gold 12 for PC

1 Answer

My dvd has 4.7 gb and my movie project is 15.25 minutes its not recording all of my project


hi,

Make that movie .rar or zip. make sure delete all unwanted files first. i hops. you will get size less than 4.7 gb.

Thanks
Adi...

Sep 07, 2009 | Nova Development Photo Explosion Deluxe...

1 Answer

I recently uninstalled Printmaster Silver 12 (temporarily needed all the hard drive space I could get), and now I am trying to reinstall. The install process gets to the registration phase, gives the...


Most programs like this leave behind "junk" files or folders with some information in them.

Try uninstalling it again, then go to the C:\ drive and look for any folders that it might have left behind.
Then go to Start do a search for PMUSERS.dat and delete it.

Jan 16, 2009 | Broderbund Printmaster Silver 12.0

1 Answer

File/Folder Permission Message in Pinnacle Studio 11 Plus


Hello welcome to FIxya!

Here you can check this procedure on how to open your files again.

"1) Check your Recycle Bin
2) Do a Folder/File Search for each of the Grey Folder Project names. This will display all Folders & Files with that Project Name. You are looking for an .stx File. If it's there, right-Click on Project Name / Open Containing Folder & Copy it to your My Projects Folder. Then you should have both the Grey Folder & .stx File for the same Project name, showing in your My Projects Folder.
If the Search doesn't display a .stx File, you can create a new one, by Opening a New empty Project, which will create a My Movie Grey Folder & a My Movie .stx File, Save to your My Projects Folder. Delete the My Movie Grey Folder & Rename the My Movie .stx File to the same name as your original Grey Folder."
So ...after finding my "lost" movie file, with its file name, under Documents\Pinnacle Studio\My Projects i then went through the following procedures using your great advice Colour;
  1. Make a copy of your found "lost" movie grey film icon file by right mouse clicking on your lost file and choosing "copy". Paste the copy into another folder in Documents where you can find it if need be
  2. Then go back to Documents\Pinnacle Studio\My Projects and right mouse click onto your grey film icon. Choose "rename". Then rename your "lost" grey film icon to a new file name but do not put .stc at the end of the file name, if you are operating VISTA and Pinnacle 12. This is important because Pinnacle 12 won't recognise the file later if you have .stc in the file name
  3. Open Pinnacle and go to the File Menu
  4. Click on New Project
  5. Open File Menu again and click on Save File as
  6. Give the file a name such as "Movie 7" and save it
  7. Close out of Pinnacle
  8. Open up Documents\Pinnacle Studio\My Projects and observe that you now have 2 new files there ...a grey film icon file saying Movie 7 AND a coloured Pinnacle icon file saying Movie 7
  9. Delete the grey icon file with the file name Movie 7
  10. Now give your coloured Pinnacle icon file the exact same rename as your precious "lost" renamed grey movie icon file, using the right mouse click on rename proceedure as explained in No.2 above.
  11. Close out of Documents file
  12. Now open up Pinnacle again
  13. Go to Menu and choose Open Project
  14. There you will see the coloured Pinnacle icon file with the new name of your "lost" movie file.
  15. Click onto its coloured Pinnacle icon, and watch your "lost" movie come into view again

Nov 16, 2008 | Pinnacle Studio Plus Version 11

1 Answer

I have the Printmaster Platinum Version17 , I cannot save to pdf files?


1. In Tools/Options/General Options, check the box beside "Optimal Printing Resolution".
2. Go to File/Printer Setup/Printer Setup.
3. Under "Name" select Broderbund PDF Converter v2.10d
4. Next, go to File/Professional Printing.
5. Select "Save As PDF".
6. At the next screen, type the name of the PDF file you want to save in "Project Name".
7. Under "PDF Resolution", select 600 dpi.
8. Click on "Save As". In the next window, browse to the folder in which you want to save the file (for example: My Documents).
9. Click on the "Save" button.
10. PrintMaster will save the PDF file to the folder you selected.
11. Open the file in Adobe Acrobat to make sure all the elements and pages are there and that it looks as expected.

Jul 28, 2008 | Broderbund PrintMaster Platinum 16

2 Answers

My documents will not open that I set in Print Master 16 eorrs come up when I try to open it


If you are trying to open it outside of the printmaster program, you have to change the format of the document or picture to a jpeg and open it in your photo program. You should be able to open it if you have printmaster installed on the computer that you are trying to open it in.

Feb 21, 2008 | Broderbund PrintMaster Platinum 16

2 Answers

Printmaster 12


CLEAN INSTALL needed here.
Try un-installing again, but this time after the un-install, shut down completely for at least 30 seconds, and then restart.
This releases "Locked files" for deletion
Then do a search for 'all files and folders' - search for both Broderbund and then Printmaster, with the options "Search system folders", "Search hidden files and folders" and "Search subfolders" checked. Delete all of those files found.
You should do this search and delete whenever you un-install any programs. It will remove lots and lots of leftover junk files and corrupted files taking up room on your hard drive. It will also give you a "clean install" when you reinstall or install an updated program. (Do this ESPECIALLY when updating to a NEW anti-virus programs and “Internet Security Suite” programs such as McAfee or Norton etc.)
BEFORE RE-INSTALLING Printmaster
Download and install "Registry Mechanic" then do the updates prior to running it and removing anything for the first time. This will get rid of all your current Registry errors, prior to installing or reinstalling.

Dec 05, 2007 | Broderbund Printmaster Silver 12.0

Not finding what you are looking for?
Broderbund Printmaster Silver 12.0 Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broderbund Graphics Publishing, Design & Multimedia Software Experts

Cindy Wells

Level 3 Expert

4758 Answers

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Broderbund Graphics Publishing, Design and Multimedia Software Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...