Question about Nortel Norstar 16-Line PBX Speakerphone

1 Answer

"Incoming Only" I cannot answer any calls on line two. When I hit the button, it displays "Incoming Only". How do I disable this?

Posted by on

  • hudsonOH Apr 29, 2009

    When you press feature *2 it just says incoming only - it won't let me reprogram it. This has now happened on two phones in our office - always on the second button.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Depends what model phone it is, try Feature * 2 then press the button you want to program, this will show what that is currently used for

Posted on Jul 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I NEED TO ANSWER THE NEC DTERN 8 WITHOUT HAVING TO HIT THE LINE BUTTON THAT IS RINGING


If your phone is set to ring then the Answer key should also flash during incoming call, you can use that. If its not set to ring there is a program to set Answer key to flash without the ring, but it's in system programming, likely a vendor thing.

Jun 11, 2014 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

CO problems


Check your Phone if connected to Jack 01 to do programming below:

on KX-T7730 phone Press Program *# (enter Password) default is 1234
Press 400 SP-Phone(CO NO.? will be displayed) Press *(Mixed or Connect will be displayed), Press AUTO ANS/MUTE untill (NOT Connect will be displayed) Press AUTO/STORE. Press HOLD(SYS PGM will be displayed) Press 400 (CO Connection will be displayed) Press SP- Phone(CO NO.?) Press SP-Phone (Not Connect will be displayed) Press AUTO ANS/Mute until (Connect will be displayed)Press AUTO/STORE PRESS PROGRAM to return to NORMAL Display.

For the incoming Calls PRESS Program *#1234 (ENter Sys PGM will be displayed) PRESS 408(Day IN CO will be displayed) Press SP Phone (CO No? will be displayed) Press SP Phone (CO1:#01:DISABLED if this is displayed PRESS AUTO ANS/MUte the Enabled will be displayed) Press AUTO/STORE. Press Program to return to normal display. In this Manner All Calls will ring to extension which is connected to Jack 01. you dont need to press the button anytime there is an incoming call.

Dec 04, 2013 | Panasonic KX-T7730 Corded Phone

1 Answer

My Norstar Phone Won't Let Me Pick Up Incoming Calls


Make sure they are Line Buttons, do FEATURE * 0 then press buttons to see what they are/do
Or maybe the key pad inside has failed.

Mar 04, 2013 | NorStar Lands Phones

1 Answer

How do I reprogram the phone to ring when a new call comes in, default to a certain line, and show caller id when a call comes in.


The answer to the Caller ID question:
Depend on the type of system that the phone is connected to. Late model Partner ACS equipment will display Caller ID info between the first and second rings, provided that the telephone line is plugged into a module that supports Caller ID.

The answers for the other 2 questions are taken directly out of the Partner ACS Programming Guide which is available for free download at Avaya's website.

Ther answer to the incoming call line ringing question:
Again, depends on the system. For the Partner ACS:

1) Press FEATURE 00 at extension 10 or 11.
2) Enter the number of the extension to be programmed for Line Ringing.

The green lights next to the line or pool buttons show the current Line Ringing settings for all

lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green

light next to that button is off.) The following ringing options can be shown by the green light

next to the line or pool button:

? Immediate Ring - on steady

? Delayed Ring - flashes slowly
? No Ring - flutters quickly

3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.

Line selection:

For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:

1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection
depend upon the type of extension:

? Key Extension: Outside system lines, Left Intercom (the factory setting)

? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory

setting), Pools 881-883, individual lines


For each button pressed, a display similar to the following appears:

Automatic Line Selection


5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.

Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.

Jan 06, 2011 | Lucent 18D Corded Phone

1 Answer

Remove message of the middle line of display


Pick a spare button and label it CALL LOG. Now press PROG that button and dial 54 STORE. Ooh, it should light up. Now press it and your display will show 3 of the 4 lines of CID info from the calls to your set. The navigator button will show the rest, just keep pressing the UP, DOWN, LEFT, RIGHT buttons. When you run out of items to display, the light and INCOMING CALL display will go out.

If you press 54 and the 3 digit number of your incoming call group (maybe 601 by default) it will follow the incoming calls to the entire call group.



Carl

Apr 24, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

GE 27938GE7_C call waiting


Yes, I re-read the manual and it says (under Caller ID) to press the flash/program button to answer the new incoming call...I must have hit the pound key in error thinking I hit the flash button. I have yet to try this in real time, but will next time it arises and report if it does NOT work.

Nov 09, 2008 | Uniden Cordless Phone

1 Answer

Caller ID


battery weak change ur battery

Sep 23, 2008 | Astra Meridian 9417 Corded Phone

2 Answers

Receiver dosen't pick up line that is ringing


go to programming section 5
You want Automatic Line Selection

Press feature00
left intercom button press twice (system program)
press right intercom once (central tel program)
enter # of extension to be programmed (intercom #)
press **
press line buttons in desired order line1 line 2 etc and
end with left intercom then press**
enter feature 00 to exit programming
Dave

Aug 26, 2008 | Avaya Corded Phone avaparp18d

Not finding what you are looking for?
Nortel Norstar 16-Line PBX Speakerphone Logo

Related Topics:

793 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

dan4261

Level 1 Expert

14 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...