Question about Car Audio & Video

Open Question

VW cd changer 1J5 035111A Ref cx-cv1820lv.

Hi, My cd player loads and revolves cd's but does read them. Much appreciaye any help on this,
Thanks
Goff Pankhurst

Posted by on

5 Suggested Answers

  • 3 Answers

SOURCE: blaupunkt ATLANTA SQR 49 and cd changer cdc-m1

Try a cleaning disc in it

Posted on Aug 21, 2007


  • 3 Answers

SOURCE: Lexus Cd-Changer

lol had this prob so many times, you will find that you have moisture in the cd exchanger and the way i found this out was on removing my cds first thing in the morning a noticed very slight misting on most of the cds. .i put the wifes hair dryer and blasted warm air into it for a good 15 minutes waited till it cooled down cleaaned carefully my cds replaced and away i went. hasten to add that this was temporary a few days later i got the odd cd not playing . i notice the prob more in cold weather and if the car has not been used for a few days. the boot maybe damp .. good luck .stu

Posted on Sep 10, 2008

  • 108 Answers

SOURCE: Panasonic CD Changer with Pioneer reciever

Panasonic CD changers have a specific plug in that will not work with the Pioneer head unit. The Pioneer uses the IP-BUS plug. You will also not be able to convert the unit to work because the data between the two cannot be controlled and you won't have the ability to use the units together.

Posted on Sep 19, 2008

SOURCE: CD changer reading "CD ERRor"

reset your radio by unplugging your battery for an hour and plug it in to see what happens. if not then time to replace. these cd players look nice and all cuz they are 6 disc but dont read mp3 well and get stuck easily with thicker cds

Posted on Oct 09, 2008

localwonder
  • 6784 Answers

SOURCE: 2007 nissan maxima will not load or eject CD's...or even play the

Hi, this is a common issue within car CD changers. the load motor go through lots of trauma during the life span that i usually 3 to 5 years. the load motor operates everything in the changer. it works the load tray and spinning of the disc as well. when this motor is out, the changer will be rendered useless. replacing the load motor will fix this issue or, you can just purchase a new changer and save a lot of money.

Posted on May 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Some information of DVD player for Audi A6


Audi always be a kind of luxurious and comfortable car, but the technological develop fast , the original function can't not meet the driver need now. So the special made Audi A6 DVD player come out. There is some information of Audi A6 DVD player for you.
The outlook of Audi A6 DVD player match the Audi completely. People will not think that the Audi A6 DVD player is not the original DVD player. The resolution of 800*480 will display the high effect of picture for you. The operation system and capacitive touch screen always make the operation easily.
The Win CE operation system can be operated easily. The Audi A6 DVD Player can react quickly. And the you can play audio and video by most of format. It will provide a high quality display for you. The Bluetooth function also help people a lot. If you want to connect some device you can find USB port in the side of Audi A6 DVD player which is the place you reach easily. you can surf by WiFi and 3G internet.
Hope these tip can help!
Audi A6 DVD Audi A6 Navigation Audi A6 GPS Audi S6 Navigation Audi RS6...

on Jun 17, 2014 | Car Audio & Video

1 Answer

So how do wire this set set up to a bridged amp any help would be appreciated


assuming that is a dvc dual 4 ohm speaker, and you have a 2 ohm bridged amp, you run a positive from each side of the speaker into the bridged positive of the power amp, and run a negative from each side of the speaker into the negative bridged terminal of the amp. if, indeed, you have 2 4 ohm voice coils, running them bridged in parallel wiring will bring the load to 2 ohms. if you have 4 voice coils, of 4 ohms apiece, you could run all 4 parallel into the amp, but that would bring the load down to 1 ohm, and you would have to make sure you8r amp can support 1 ohm operation.

Jan 07, 2017 | Car Audio & Video

1 Answer

My 2002 mazda mvp ausio system is not working but I can insert and eject the CD but cannot do the in tape cassette also the display is not showing the clock or any thing plz any one tell me whats wrong...


Internal board damage. Also the ribbon cable for the soft load on the cassette is not engaging. This can happen due to just ware from the age of the unit. Cold solder joints are usually the culprit, that is why the display will not light. Check yards for a newer used deck it just might be easier unless you have a shop you can send it to.

Nov 10, 2014 | Car Audio & Video

2 Answers

How to on bluetooth


KD-R200 does not have the ability to add Bluetooth to it

Apr 03, 2014 | JVC KD-R200 Car CD/ MP3 Player

1 Answer

DVD won't place discs


Did that just begin out of nowhere? IS the Dvd spinning, if you listen closely and the player is making noise as well? That would be the lens trying to get a read on it but if it's scratched (I'm sure you tried others) sometimes the lens just go bad out of nowhere...Mu original 500 Sony PS1 in 1998 lost its lens about 3 months in...I can't think of anything else right this moment....I hope you fix it...

Mar 23, 2013 | Car Audio & Video

2 Answers

No power to amp


check and try finding another grounding spot

May 16, 2010 | Lightning Audio B4.250.2 Car Amp

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...