- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Is is standby light blinking red or any other light? Let me know how many times red standby light blinking after three seconds long pause to provide you helpful info. It seems pop sound was due to broken lamp, please check lamp inside tv and if it is broken, replace it to solve tv problem. Hope this will help. Thanks.
Thanks for using FixYa. You need to check the horizontal and vertical output wave form at the high side of the deflection which should be a normal horizontal/vertical pulse respectively. Now check the HV output transistor on all three elements and also check the regulator transistor which might have short. Replace the parts/diodes which are gone bad and can be easily replaced. You can order these from the following link --
Hi, The standby light LED BLINK is in specific numbers, please count that how many time LED BLINKS in specific time and in specific numbers like 1 time 2 time 3 times etc, every blink has its area of fault which processing IC detects, Therefore please count and let me know the number of blinking stand by light and then i can tell you the area of fault and its solution. Hope you will understand my sayings, if need more clarification write in comments. thanks for using fixya.
Order Code….. KT02 POWER SUPPLY REPAIR KIT BUSH MAXIM 1157 1154 Medion Goodmans (Standard) 04TA069I 05TA71B 05TA071C A standard power supply repair kit for faults attributed to the standby +5v rail. BUSH IDLCD27TV006. MAXIM 1154, 1157. MEDION MD30112. GOODMANS IDLCD27TV006. The numbers off the boards will read: 04TA069I 26” 27” 30” 32” & 05TA71B, 05TA071C. LCD TV POWER SUPPLY PROFILO-TELRA. Please check the primary of TR20 before fitting the kit. Primary windings should read approx 2.700mH / 4.00 Ohm. We recommend all kits are fitted by qualified engineers We accept no responsibility for loss, injury or damage caused by your use of this kit as a successful repair depends on your own skill and fault finding ability.
Look carefully at the front lights. Usually when these sets shutdown they have a blink code on either the standby light or the lamp light. Update this with those counts. In the meantime, you may be seeing a problem with heat. If the lamp area gets too hot, the set will shutdown the lamp. Once the area is cool again, the lamp will fire.
Update this and we'll hopefully fix the both of them.