Question about Routers

1 Answer

Setting the DMZ setting on my pelican router

Do you know how to set the DMZ on a pelican LAN system link router?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 193 Answers

Sure first connect a pc through hard wired in the linksys and open a browser and type 192.168.1.1 and user name admin and password admin and login and in application gaming select it and select DMZ and enable it and put a ip address in teh range of 192.168.1.100 to 192.168.1.254 and save it and connect teh pc through that device and assign ip address statically on it login to that inter face and select wan setup to static and ip address which u entered in dmz on teh linksys exl 192.168.1.__ and subnet mask is 255.255.255.0 and default gate way is 192.168.1.1 and dns 1 or primary dns is 192.168.1.1 and save it

Posted on Jun 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set a static route lan side on a tew-733gr


You need to download the user guide from here

TRENDnet Support

Basically

1. Make the computer or network device (for which you are establishing a DMZ link) has a static IP address (or you can use the DHCP reservation feature to ensure the device has a fixed IP address) (see "Set up DHCP reservation" on page 29).
A. Signing up for a Dynamic DNS service (outlined in the DDNS section) will provide identification of the router's network from the Internet.
2. Log into your router management page (see "Access your router management page" on page 22).
3. Click on Access, and click on Firewall & DMZ.
24492585-jbe4ik0w3n2netaaqjxl1dxw-3-0.jpg
4. Next to DMZ Enable, click Enabled.
5. Next to DMZ Host IP, enter the IP address you assigned to the computer or network device to expose to the Internet.
6. To save changes, click Save Settings.

May 23, 2014 | Trendnet Routers

1 Answer

TP-LINK dmz bug


even though my pc was set to DMZ port 80 was still in use for the web-interface. I've changed the router web admin port to 81 and now it is fine.

Apr 03, 2012 | TP-LINK TD-W8901G Router

1 Answer

Trying to add DMZ to my D-Link Router, can't find my D-link password


If the default password on the D-Link has been changed then-
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON untilthe LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jul 18, 2011 | D-Link Routers

2 Answers

I want to assign a DMZ' to my router to help my ps3 firewall change from restrictive.... how do i do this??



If you have servers on your LAN, configure an SUA server set to have them visible to the outside. From the NAT - Mode screen click Edit Details and fill in the fields as show
do this to setup a DMZ

Mar 06, 2011 | Zyxel Prestige 660HW Wireless Router...

1 Answer

How do i open my nat for my motorola sbg900


for static IPs: check your router settings. router should be in "bridged" mode so that all the devices have own static "lan" ips like 192.168.0.1 / 192.168.0.255 router will have one lan ip static and one global ip(one it gets from service provider) you must manually give one address of 192.168.0.1 / 192.168.0.255 for your xbox. then give correct subnetmask (default 255.255.255.0) and gateway routers lan ip (default 192.168.0.254) you can aslo put routehrs lan ip as default dns if needed dmz or port forwarding is a tool in your router settings you can assign outside ports to specific ip i have only done manual port forwarding, not sure how dmz works.

Feb 26, 2011 | Arris SURFboard SBG900 Wireless Router...

1 Answer

How do i access the NAT settings for my D-Link DIR-655 Router. i believe the strict setting is affecting the WiFi i need to connect to the internet through my computer.


NAT STRICT

Step 1 : Connect Router - Computer ( Wired )

Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of the internet explorer

Step 3 : The Default Password is admin

Step 4 : At the top Click Advanced

Step 5 : On the left Click Firewall Settings

Step 6 : Enable DMZ

Step 7 : give the IP Address of the Xbox/PS3/Wii in it

Step 8 : Uncheck the option Enable SPI

Step 9 : Click Save Settings

Step 10 : Test the connection

let me know if this works

Regards
TOM

Oct 24, 2010 | D-Link DIR-655 Wireless Router

2 Answers

Linksys RV042 Router and AT&T Static IP's


How were you advised you have 5 more sticky IP addresses? Are you talking about LEGAL IP addresses? If so, all you need to do is program your PC with one of the addresses manually and set the router as your default gateway. I assume you know your DNS server details? If not, use Google free ones 8.8.8.8 and 8.8.4.4.
I hope you have firewalls on your systems!

Mar 15, 2010 | Linksys RV042 VPN Router

2 Answers

How to configure dmz on linksys wireless n router?


  1. Log into your router. (If you need help how to do it let me know!)
  2. Go to th "Application & Gaming" tab.
  3. click on "DMZ"
  4. choose "Enable"
  5. Enter the IP address of the computer you want to put in the DMZ.
  6. Click "Save Settings"
Some notes:
  • Putting a computer in a DMZ is pretty risky, because all ports to this computer are opened. Make sure that all recent patches are applied and your virus software is up to date! A more secure solution is to use portforwarding. (See this site how to do that for a specific software for your router.)
  • Your computer should be set to a static IP. For two reasons:
  • A) DMZ will not work if your DHCP server (your router) assigns at one point a different IP address to your computer,
  • B) If a different computer gets the Ip address assigned that you specified in your DMZ settings, then that machine is exposed.
If you don't know how to assign a static IP address, let me know and I walk you through the steps.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Aug 08, 2009 | Port Designs Linksys Wireless-G Broadband...

2 Answers

XBox 360 not compatible with Motorola WR850G


Motorola WR850G router may fail to connect to xbox live after update to firmware 6.1.4. I was able to correct the problem. My solution was
Go in xbox >> network config >> IP and use Static option. Set the xbox to an IP in the range allowed by your router configuration. The router IP config range is found in the router config web >> Lan section. Then I set my router config >> Routing >> DMZ IP Address setting to the xbox ip I just assigned to my xbox. Restart router using the restart button on the Basic page of router config. Restart your xbox and attempt to login to xbox live. This solved my problem.

As a side note, on the xbox networking test page, the xbox live status message will allows show they are aware of a problem with xbox live login. This is a lie. For that reason I postponed trying to fix my router problem thinking it was an xbox issue, it is not. Once you finally connect to xbox live you will still notice this incorrect message remains. Microsoft developers ****...

Dec 26, 2007 | Arris WR850GP Router

2 Answers

How to port forward using Dlink DI-524 for Emule?


DMZ is a feature that is included on some routers but is not in Internet sharing software. A DMZ allows a single computer on your LAN to expose ALL of its ports to the Internet. When doing this, the exposed computer is no longer ?behind? the firewall. Port Forwarding vs DMZ A DMZ is far easier to set up than port forwarding but exposes your entire computer to the Internet. Sometimes TCP/IP applications require very specialized IP configurations that are difficult to set up or are not supported by your router. In this case, placing your computer in the DMZ is the only way to get the application working. Placing a computer in the DMZ should be considered ?temporary? because your firewall is no longer able to provide any security to it.

Oct 03, 2007 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
Routers Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...