- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if no any power indicator the first place to be check is the power supply where in the fuse get blow. if the fuse blown with darkened color that was mean has shortened line, might the amplifier circuit get damaged that cause of popping before it totally down.check for bad amplifier ic and shorted diodes.
1. Connect the front left,
front right, center, and sub woofer speakers to the back of the home theater
the home theater system off, insert the TX card into the TX Card connection
(WIRELESS) on the back of the home theater. Important:
Make sure to insert the TX card with the slanted portion of the card facing
3. Connect the
rear left and the rear right speakers to the back of the SWA-3000.
4. Plug the power cord
of the SWA-3000 into an electrical wall outlet, and then switch the power
switch on the back of the SWA-3000 to [ON]
In the monitor section on the 2488 console (upper right) make sure your monitoring source is set to 'stereo'. Then make sure your 'monitor level' control is turned up. The 'stereo' fader (sub mix fader on the MKI, stereo fader on the MKII).