Question about Philips Magnavox 42MF521D/37 Television

1 Answer

Red bar across top of screen??

I have a Magnavox 37MF337B/37 tv. The screen has a red bar across the top. It just started today. Any ideas?

Posted by on

  • hokepoke Jun 25, 2008

    I have a toshiba regza 42" LCD that had a 2 " red bar across the top of screen yesterday.

  • goseahawks Aug 15, 2008

    I HAVE THE SAME PROBLEM RED LIN ACROSS THE T.V.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same horizontal, solid red bar along the top of the tv screen. I have an older analog Philips Magnavox TP2785C221. It just started all of a sudden. It was on every channel. However, the bar did not appear on the other input channels (e.g., AV1, AV2). So this meant that the red bar was only occurring on the antenna input. I unplugged my cable decoder box and restarted it. The red bar went away and that seemed to solve the problem for now.

Posted on Jul 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magnavox turns on then goes off model 37f337b/37f437b


More than likely power board,usually repairable,look for blown capacitors.A blown capacitor will look like the top is rounded also suspect capacitors will show signs of the plastic coating shrinking .

Jan 13, 2013 | Toymax Magnavox 37MF337B 37 in. LCD TV

1 Answer

Magnavox tv turns off by itself


hello, i don't where you live but there are no analogue signals being broadcasted any more. if your in england you will need a freeview box, some tv will switch off if they are not receiving a signal
regardsshaun

May 11, 2012 | Toymax Magnavox 37MF337B 37 in. LCD TV

1 Answer

Grey lines


this a vertical circuit, and HV Circuit Defective, send to repair

Jan 15, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

Sometimes when I turn on my Magnavox 37MF337B tv it emits a very loud squeal and the picture/channel locks up. I cannot turn it off with the remote. I have to unplug it and try again. When it is on though...


you have some bad caps in the mainboard very common on this model the can shaped devices will have a puffed up top i would suggest you have a tech reaplce them they are hard to get out due to the large ground plain on the board you need a good hot iron

Nov 24, 2009 | Toymax Magnavox 37MF337B 37 in. LCD TV

1 Answer

Magnavox model S1MP6100D/37 I have a large screen


there are 2 stk392-120 chips mounted to a large heat sink. both are bad, also 6.8 ohm 1/4 watt resistors are bad . need ohm meter top check these.

Nov 16, 2009 | Toymax Magnavox 37MF337B 37 in. LCD TV

1 Answer

Black Bars and Power Issues


Sounds like a solder bridge bewtween the IC pins double check the solder for any pins accidentally bridged with solder.

Sep 06, 2009 | Televison & Video

Not finding what you are looking for?
Philips Magnavox 42MF521D/37 Television Logo

Related Topics:

800 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71182 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...