Question about Audio Players & Recorders

1 Answer

Denon Part# 2621217005 for DRA-1025

Hi,

Thanks for your response.
Unfortunately, Vance Baldwin Electronics doesn't actually have a 2621217005 or a 2621217018 (their listed replacement part) and I am unable to order either via their website.

Any other suggestions?

Thanks again for your help,

DonMoody

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Sorry after I posted I checked; every distributor that I could find it is listed as unavailable. I even went as far as looking for the type of part it was to see if I could get one with the same specs. I spent a good hour looking for it but it looks like your best bet is going to be a non functioning used unit.

Posted on Jun 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Denon DCM 290. It doesn't read disc. Is it worth anything to anybody or should I just junk it?


It is a safer to scrap it. If the laser lens is defective it is not worth to replace it as the cost of the part and labor will not be justified .

Jan 14, 2017 | Denon Audio Players & Recorders

1 Answer

Im after a denon RCD-N8 service manual please? can anyone help? Thanks


Sorry the service manuals are not sold to the general public, only authorized approved Denon repair centers.

Jan 09, 2017 | Denon Audio Players & Recorders

1 Answer

Denon receiver won't turn y


By creating a makeshift gel wrist pad for his mouse hand, we were in a position to eliminate the source of this discomfort also. AmanStino Ultra Slim Lightweight Smart shell Stand Cover with Auto Wake...

Jan 09, 2017 | Denon Audio Players & Recorders

1 Answer

Want to use my current speakers with a new surround sound system. Current system is 5.1 channels, rated at 100w per channel @ 8. Ohms. New System is rated 145watts, 5.2 channels at 6 Ohms. Will b ok?


Hi Ronald.
8 Ohm speakers will work just fine as replacements for the
6 ohm speakers. When fitting speakers you need to consider
The power handling capability. The impedance and the frequencies
involved. Power handling is expressed in wattage ie 100W.
Unfortunately this can be expressed in rms, max or peak music. The rms value (root mean square) is the only really relevant figure as this is the continuose handling power at 1 KHz. The impedance
is the resistance that the amp sees but is not a dc resistance and
varies with frequency. The lower the impedance the more power
will be drawn from the amp. In the event of a short circuit across
the speaker the amp will try to deliver infinite power into an infinitly
small load in an infinitesimal amount of time and will self destruct.
Using an 8 Ohm speaker draws less power than a 6 Ohm speaker.
Connecting speakers in parallel; results in the impedance beingreduced. For example two 8 Ohm speakers in parallel will result
in a 4 Ohm impedance load but in series will be 16 Ohms.
Incidentally the the .1 (5.1) is the sub woofer which only has
to handle the bass frequencies, a small percentage of the
amplifiers overall frequency response..
Connect your speakers and then power up the amp last
after double checking there are no shorts on the speaker
cables.
All the very best from Vintie.





Jan 07, 2017 | Audio Players & Recorders

2 Answers

Does YP-S3 Have Bluetooth? Or It can Put Bluetooth on my own?


YP-S3 has not Bluetooth. Unfortunately you can only listen to music of it with corded headphone.
Thanks.
gylacz

Aug 31, 2011 | Samsung YP-S3 Digital Media Player

2 Answers

My ipod is just playing without the sound carrying through to the speakers. I dont know how to make it work?


Verify there is nothing plugged into the headset port, including headsets, headphones, or adapters.
Original iPhone only: While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris in the headset port:



To remove debris in the headset port, try connecting a pair of headphones to the headset port and then remove the headphones. Repeat this several times.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
If that doesn't work, try restarting the iPhone. Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
If restarting the iPhone doesn't resolve the issue, try restoring the device.

May 28, 2011 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100304 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...