Question about Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

Hoover model F8515 won' t **** up any water

It could be in reverse do you have any tips

Posted by on


1 Answer

Hoover Model F8515 won' t **** up any water
posted by kevingao92 on Jun 24, 2008
It could be in reverse do you have any tips

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. the Hoover Model # F8515 works on the pull back to pickup the water and on the push forward you can dispense extra water or solution and the brushes will still scrub but on the pull back it dispenses, scrubs and also picks up the water all in one sweep, if not then contact you local vacuum dealer in your area, check the owner’s manual for the trouble shooting guide and or call the Hoover Factory cust serv @ the information listed below.

So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jun 25, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Hoover f8100900 will not suction

Here is a site which will guide you through possible causes that are causing the problem with your vacuum and help you pin point the correct one. Hope this helps.

Jan 12, 2018 | Hoover F8100900 Upright WetDry Vacuum

1 Answer

Can't get any water to come out of vacuum neither rinse or scrub. Acts like its stopped up. Model#F7220-900 Hoover spin scrub

Did you ever put water into the 2 holding tanks? Read the owner's manual! If you don't have one go to the Hoover website and put in your model number and download the pages! IT's all there. If you have been using it and it worked, yes, you have a clog or more than the tip, in the tubes going to the tip, etc.

Dec 27, 2012 | Vacuums

1 Answer

My floor mate won't dispense liquid onto the floor

make sure the solution tank is on properly this link is for the manual

Aug 04, 2012 | Hoover H3010 Upright Wet/Dry Vacuum

1 Answer

I just bought a hoover steam vac model F5914900 and the clean water tank is leaking. I tried pressing the clean surge button and the trigger button that was suggested by someone else but it won't

Go to and find a local Service Station. They will replace it at no charge. MUST be a warranty location to get it free. Take your sales slip with you.

Jul 28, 2012 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

I have a hoover steam vac F5915-900 I bought at walmart about 4 months ago. I used it about 5 times in differnet rooms. Today when I went to use it It won;t pick up the dirty water. I cleaned the filter...

Make sure the suction area of the face plate is clear of all debris. If anything else, call the number on the machine, it's still under warrantee if the machine doesn't work from normal use.

Sep 05, 2011 | Hoover Vacuums

1 Answer

My hoover floormate will not dispense water

make sure check valve in the solution tank moves up freely. check that the sprayer tips are not cloged.

May 15, 2010 | Hoover Floormate H3000 Upright Wet/Dry...

2 Answers

Trigger not working

Sounds like you need to replace the handle valve pieces, if they are available, if not then you will have to replace the hose asm. Just take the valve off and see if one of the pieces have a piece broken off. Then with your model number, you can see if that piece is available from someone that has Hoover parts.

Jan 07, 2008 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Hoover self-propelled u6630-900 reverse not working

THe forward/reverse lever (made of plastic) possibly is broken. New part is about $10.00

Dec 12, 2007 | Hoover U6630-900 WindTunnel Bagless...

Not finding what you are looking for?
Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides