Question about Black & Decker String Trimmer Cordless 12" 18V

Open Question

How to fit strimmer line on black and decker strimmer gl335

Posted by on

  • Anonymous May 03, 2009

    I have tried to fit a new strimmer wire but every time I use it, it breaks. Could you give instructions on how to fir it. It is for a gl 300 Balck & Decker strimmer.

×

5 Suggested Answers

  • 2 Answers

SOURCE: how can i repace the

Instructions can be found at: https://www.2helpu.com/PDMSDocuments/EU/Docs//docpdf/gl550_uk.pdf.

If the line keeps getting too long, it's because swivel 14 in diagram 7 was in the wrong position when you inserted the spool - just move it to the ouside position, re-insert the spool and away you go. Frankie.

Posted on Jun 11, 2008

  • 9 Answers

SOURCE: how do I rethread the

take the spool out there shood be a I hole to push the twine throu tie a not that wont come out look for dirtion or arrow to wind it leave enough to sitck thru the side where the twine cuts push the spool up and lock it

Posted on Jul 30, 2008

  • 4 Answers

SOURCE: got a Black & Decker GL301 strimmer but have lost instruction manual. dont know how to fit new cutting wire

Go to Homebase, B&Q, Ebay or your local hardware shop and buy a new spool, ALM part number BD032.

Posted on Jun 01, 2009

#1 Taper
  • 1040 Answers

SOURCE: threading line on black & decker GL301 strimmer

Do you mean that the string keeps feeding as you try to operate the trimmer?

If so, you are winding the string on the spool the wrong way. Put the string on the spool in a clockwise direction. This should do it.

Jim

Posted on Jun 21, 2009

  • 133 Answers

SOURCE: i have a black & decker gt701 strimmer. i

Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit.
Replace empty spool with new full one or wind on aftermarket string. Wind in direction of
arrow on spool. Make sure spool is seated on rachet firmly.

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to thread a strimmer instructions


Top half you wrap the trimmer line in the direction shown .Bottom half in opposite direction.. Question not very clear ?? Ken

Jun 08, 2012 | Black & Decker Hand Tools

1 Answer

My Black & Decker Reflex Strimmer GL570 does notautomatically feed out the line.


disassemble the string part and clean it,,, it is common for them to get gluped up and not feed. All so make sure you have it wound the right way.

Jun 16, 2011 | Black & Decker Garden

1 Answer

How do i fit the spool on my black and decker strimmer model no GL535


guide the two strings thru the holes in the outer ring,then push it down into place,and screw knob on

Jun 21, 2010 | Black & Decker String Trimmer Cordless 12"...

1 Answer

How to restring a black & decker gl 565 strimmer


Hi Bill,
If you turn it upside down you will see the strimmer head. You should be able to remove the protective cover which will allow access to the string cassette. The rest is self evident.

Feb 14, 2010 | Black & Decker Garden

1 Answer

How do i replace strimmer wire on a black and decker 315


how do i replace a spool and line on a black and decker GL20 strimmer x

Sep 10, 2009 | Black & Decker Garden

1 Answer

How do you fit a new spool?


refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Jul 21, 2009 | Black & Decker Garden

2 Answers

Threading line on black & decker GL301 strimmer


Do you mean that the string keeps feeding as you try to operate the trimmer?

If so, you are winding the string on the spool the wrong way. Put the string on the spool in a clockwise direction. This should do it.

Jim

Jun 19, 2009 | Black & Decker Garden

1 Answer

Got a Black & Decker GL301 strimmer but have lost instruction manual. dont know how to fit new cutting wire


Go to Homebase, B&Q, Ebay or your local hardware shop and buy a new spool, ALM part number BD032.

Jun 01, 2009 | Black & Decker Garden

Not finding what you are looking for?
Black & Decker String Trimmer Cordless 12" 18V Logo

Related Topics:

3,042 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Nick Olsen

Level 2 Expert

178 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Black & Decker Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...