Question about Audio Players & Recorders

1 Answer

Aiwa NSX-V51G (Compact Disc Sterteo System, Please.

I'm waiting a answer from you ???

Posted by on

  • Lenny0 Jun 27, 2008

    Appreciate your responce, but I had already made every effort to clean the obvious and that being the viewer, or mirror. I really wanted as I requested the schematic of the unit, since I already had the original book, but you were not able to provide it to me and as a result I had to have a pro tech check it out and it could not be fixed and parts not available cost effective. Before you responded to me, I thought I would upgrade to a live telephone call, but never heard from your company and I never spoke to anyone.
    Considering the above and your guarantee, I am requesting a full refund of all charges. Thank You and I hope to use your services in the future.
    Leonard Turken ---- 561 499 0393
    5200 Privet Place D
    Delray Beach, Florida 33484

    PS Please advise me of your decision, Thanks again

  • Anonymous Mar 26, 2014

    are there any remotes available for nsx-v90 aiwa system


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 260 Answers

let me get with you on that.

Posted on Jun 24, 2008

  • Ken Jones
    Ken Jones Jun 24, 2008

    I am sorry, but I am not allowed to give out my personal email address or make calls. I am only allowed to use this contact format.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need a manual

Simple web searches get answers faster than waiting for one of us to pick up the question.

Try "Yamaha RX-V665 manual"

Aug 03, 2011 | Yamaha RX-V665 Receiver

1 Answer

The freeview box listed above will not come on it just keeps saying starting then it says wait please help?

Switch it off............................Pull the plug out of the mains.....pull the aerial plug out......
Now.......wait 3 minutes.......plug back in the aerial ensuring the wiring of the aeriel is okay...plug back the menu......retune.........hope this helps.

Mar 19, 2011 | Audio Players & Recorders

1 Answer

Have lost four preset channels on my Technika DAB 109CR digital clock radio and lost manual so have nothing to consult to get back these stations. Everything live but showing only one station constantly

Finally sussed out how to (re)set presets, overall you need a little patience:
Probably best to press Autotune before we set off and let it do its thing.
Press 'presets' and find a free channel or the one you want to change, leave it until you can hear the station its on play.
Now, press 'jog/select' and WAIT until it says <SELECT> (but don't wait too long when it says this or you'll have to start again)
Use dial to find station you want AND LEAVE to tune in.
Press AND hold presets down until number flashes.
Press jog/select once briefly (normally).
Press presets once should now say "Saved"
Leave to save for a few seconds.
You can now change station either by pressing Presets and moving dial...waiting for the station to load OR press jog/select to manually tune to the station of your choice using the dial.

Feb 20, 2011 | Audio Players & Recorders

1 Answer

Pioneer VSX D710S, I hook everything up and turn the unit on, after about 5-10 seconds it flashes POWER OFF and shuts down.

I wouldn't hold my breath waiting for free detailed circuitry.

A precise make and model might yield more-specific answer.

Generally speaking, an amp protects itself from heat, shorts and overloads.

Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.

You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.

If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.

If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced hands-on tech.

Jan 24, 2011 | Pioneer VSX-D710S Receiver

1 Answer

How do i reset dennon avr 1000

turn it off and unplug from outlet, wait 1min

then press audio and video buttons together on right hand side of unit

hold these and turn plug it back in to outlet
wait until display flashes every second then release buttons
turn on unit to reset
note all settings will be factory default.

Hope this helps
Thanks for using FixYa

Jun 12, 2010 | Denon AVR-1200 Receiver

1 Answer

My yamaha receiver Kv-R1000 keeps shutting off.

Hi rpolanco
To answer your question;
First i`d like to know if there is a specific message on the front panel display before it shuts down.
One thing you can try at this time is to switch back and forth a couple of times the impedance selector switch at the back.
Another thing is to try to loosen up and re-tight all the screws at the back of the receiver(you`ll need a philips/star screwdriver) as the back panel is often used as ground for different circuits.
Try that and let me know about display messages.
I`ll be waiting for your answer

Dec 30, 2009 | Audio Players & Recorders

1 Answer

When i press the tv/sat button the display says unlock. How do you unlock it

Problem fixed,
I turned the unit off waited 10 seconds then turned it back on pressing the power button and set up button together this started demonstration mode.Let the demostration mode run till finished then turn it off again wait 10 seconds and turn it back on.This solved the problem

Dec 23, 2009 | Sony STR-DE545 Receiver

1 Answer

Bose lifestyle fault code 802

Here's what the Bose support website suggests.  Good Luck!
Messages displayed during a Music Information Update
Messages may appear on your media center display during a Music Information Update. If you see a message with instructions to call Bose, and a three-digit code such as "Error Code 802" or "Failed 172" while performing a Music Information Update, it does not necessarily mean there's something wrong with the system. Performing a media center reset and installing the update again may address the issue.

To reset your media center, follow these steps:
  1. Turn the media center off. Wait two minutes

  2. Unplug the power cord from the media center. Wait 30 seconds

  3. Reconnect the power cord

  4. Wait until "Bose Lifestyle" disappears from the screen

Note: After a reset, you will need to wait several minutes before playing stored music (3 to 20 minutes, depending on how many CDs have been stored). All other sources will be available immediately after the system powers up.

If you have any additional questions about these messages, please contactBose® Technical Support or call 1-800-278-1281.

Dec 01, 2008 | Audio Players & Recorders

1 Answer

How do I enter the code for my Blaupunkt 6 Disc cd changer in my 98 Vectra?

Switch off radio, press and hold cd selection button, switch on radio, wait for CODE ---- to appear, enter code [same maner as radio], press cd selection button and wait for beep. Job done.

Jul 20, 2008 | Audio Players & Recorders

1 Answer

No sound with TV

my suggestion is to reset it to factory preset more than likely the pors that set you pu changed nothing for the origanal settings. heres how to set the reset:
1 press the masteron off on the front panelto the off position
2 press and hold the straight(effect) button then the master on off to turn on the set.
3 use the program selector to select factory presets
4 use the srtaight(effects) button to select reset then shut it off with thw master on off to lock in the setting turn it back on and you should be back to normal

Apr 06, 2008 | Yamaha RX-N600 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

100340 Answers


Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71126 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides