Question about Rockford Fosgate P3001 Car Audio Amplifier

1 Answer


It didnt work :-(. any other possibilities?

Posted by on

  • eenloe Jun 25, 2008

    i got it workin. thank you for your help. haha i did have them reversed, i tried switchin them again and it worked. lol thank you! appreciate it tons!!!


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Are you sure that you hooked up the correct wire? You can try testing with a 12V test light, test with radio on then off, test to see if the wire has 12v when either source is turned on too. Other than that I will have to do a little bit of digging and see what I can come up with. I'll let you know what I find.

Posted on Jun 24, 2008

  • InVision_A_V Jun 27, 2008

    Good I am glad to see that you got it taken care of. Feel free to email me again if you have any other 12V related problems.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Sony Xplod 800w Amp running a 10' Sony Xplod Amp....i unhooked the amp to do some moving and i tried to put it back in today and it didnt have any sound coming from it! I did notice the power...

it sounds like it could be a blown channel in the amp. if the sub was blown it would still work just sound horrible. i have blown many subs and amps. you can bring it to an audio shop near you and they can fix it. i just got one of my channels fixed for 35$

May 11, 2011 | Sony Xplod Car Audio Amplifier XM-DS1300P5...

1 Answer

Blow out amp

try a basic connection connect

positive from car to positive of amp

ground to ground

and positive of car to remote of amp

see if it turns on

also check the fuses in the car
check for voltage on the wires

May 15, 2010 | Performance Teknique ICBM-782 Car Audio...

1 Answer

1000 watt amp problem. Speaker + Wire

hey wats up, let me see if i cud help u out here...i will give it a try and use bigger wire, the prob. cud b the wires cnt take pwr thts running through them, but tht cud only b the reason if ur wires are small...other thn tht u cud check 2 see if all ur fuses are correct & thy aint letting 2 much pwr through tht cud the prob as well...let me kno how tht gose & if those dnt wrk there might b sum thing else we cud *** up wit.

Jan 28, 2010 | Car Audio & Video

1 Answer

Hi i disconnected the ipod, no diference so i decided to rewire the 6x9 through the polk amp, it still had the short/low ohm problem however each time it shorted the 6x9 kicked, this didnt happen with the...

OK thanks for more info now you say light comes on even with diff speakers great you no now its not your subs just amp left and its wiring focus on them dubble check your earth even run a small wire from batt outside of car straight to amp does light to come on after you have checked all that even run new earth can be broken in side if none of this works and you no its not wiring i would say take to elec repairer could be just loose resister something like that as a friend had that prob hope you get this sussed it drove me grazy

Oct 17, 2009 | Polk Audio C5001 Car Audio Amplifier

1 Answer

My Sony Xxplode Amp Not Working?

Most amp problem is due to bad connection. Specially check the main power. Sometimes it will indicate you are getting voltage but not enough current because of bed connection. For example it is possible for the on indicator light to be on, but you are not getting enough 'juice' to let it operate. Check the main fuse at the front by the battery.

Jul 05, 2009 | Sony Xplod XM-554ZR Car Audio Amplifier

1 Answer

I think ma kicker kx1200.1 amp is blown or ma kicker L7 are gone

that would be the amp. sorry to say. when a wire crosses over, it sends a shock through the amp, there are a few things to try just to see if you fried the amp. the first thing to try is to move your ground to a different location. second thing to look at would be the fuses. alot of times the fuses will blow at the slightest shock. the amp will still turn on if you have an amp with 2 fuses, it just wont be getting all the power it needs, which could be causing your problem. also, it is worth the hour and a half to mount everything down in your vehicle. you might check the kicker website, because i have herd rumors that kicker offers a lifetime warranty on almost all of their products. best of luck, and i hope you didnt fry your amp.

Apr 09, 2009 | Kicker KX1200.1 Car Audio Amplifier

1 Answer

My amp

Check your speakers with an ohm meter. They should have some resistance but not totally shorted. Its prob the amp that got fried. Connect the amp to the battery with no speakers attached to it if the protection light still comes on then the amp is blown.

If the amp is blown you can send it to people on ebay and get it fixed pretty cheap. Good luck!

Aug 18, 2008 | JBL GTO75.4 Car Audio Amplifier

1 Answer

Amp works but no sound from sub

Some older Pioneer radios require you to connect the Subwoofer RCA to the rear output on the back of the radio and then you have to turn on the subwoofer in the menu on the radio. What model Pioneer radio is it? Also, make sure that the RCA plugged into the amp is on the input side, not the output side.

Jul 29, 2008 | Sony XM-2002GTR Car Audio Amplifier

1 Answer

Amp Kicks on and off

First of all you need to check all your connections on your power and ground ... then check the voltage you are getting at the + terminal. Next check the power Remote from your radio and make sure you have power from there.     If  you have PROPER voltage on each of those then yes your amp could possibly be bad or going into protection.

Oct 13, 2007 | Eclipse XA5000 Car Audio Amplifier

20 Answers

Amp isn't putting out any sound

I have a Digital Audio model-DA2200W, Was listening to my tunes loud as always....then the subs quit bumpin...checked the subs cuz i thought i blew em...theyre fine...The power on the amp is still light and all..just no output..I opened it up to see if anything looked burnt looks it toast or can i fix it??

May 25, 2006 | Power Acoustik LT-980/2 Car Audio...

Not finding what you are looking for?
Rockford Fosgate P3001 Car Audio Amplifier Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rockford Fosgate Car Audio & Video Experts

Pablo Gonzalez

Level 3 Expert

733 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers


Level 2 Expert

89 Answers

Are you a Rockford Fosgate Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides