Question about Computers & Internet

2 Answers

Model-WS-7013U...changed all batt. inserted in remote, first...waited then into inside unit...did this 4 times, do not get outside temp...Help

Posted by on

  • 1 more comment 
  • Anonymous Nov 05, 2008

    i changed the batteries in my units and i just get a double line ive checked the batteries and the test fine what do i need to do

  • dexxter214 Dec 09, 2008

    same problem

  • Anonymous Dec 13, 2008

    I have the same problem...put new batteries in the outside unit...then put new batteries in inside units...only the inside temp. records...not the outside...what am I doing wrong?

×

2 Answers

Try this website :http://www.lacrossetechnology.com/7013/faq.php#section1

Posted on Sep 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the 7013, where do I put the temp transmitter, I have never use this on, I am replaceing an old one that has awire from out side that plug into transmitter, your mode dosn't. Placing the transmitter out sideside? Help

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The indoor temp on my acurite model 02086 weather stn. constantely reads 26c how do I get it to read the correct indoor temp?


The manual of unit will tell you how to change reading from Centigrade to Fahrenheit. Read it carefully for details.

Oct 02, 2016 | Measuring Tools & Sensors

1 Answer

Modelws 7013u how to replace and reset batteries


In systems with an outdoor transmitter and an indoor receiver, the usual battery replacement procedure is to start with the outdoor transmitter first, allow time for it to start sending data, then install the replacement batteries in the indoor unit. You should see the outdoor temperature being displayed.

Jan 03, 2015 | Measuring Tools & Sensors

2 Answers

Model 00754W4 does not sense outside temperature..new batteries have been placed correctly in both inside and outside units..noW what do I do?


We would recommend a reset of your unit. Please verify that you are using good-quality, standard alkaline batteries such as Energizer or Rayovac, then follow the steps below.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.
If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or info@chaney-inst.com.

Dec 03, 2014 | Acu-Rite Acurite Wireless Indooroutdoor...

1 Answer

I have a 433MHz cable free indoor/outdoor thermometer. It has worked perfectly for years. Just changed the batteries in the main unit and the remote. The main unit will not pick up the outside temp. I...


You have to push some buttons to tell the MAIN unit to scan, then put battery into the REMOTE, set channel, and hit reset through a little hole. And the MAIN should see it.

Sep 17, 2011 | Oregon Scientific Wireless IndoorOutdoor...

2 Answers

I have lost my manual for Nexxtech thermometer model6312030. I can't get it to read the outside temperature after I changed the batteries. How do I reset to make it read. Or better yet, how can I get a...


You must reset the outside unit every time you change a battery. To rest insert a paperclip into the small whole marked "reset". Temperatures should now appear on the inside or remote unit.

St. Bruno, Quebec

Nov 10, 2010 | Vacuums

5 Answers

Wireless thermo clock not reading outside temp


I've had a similar problem with another model, an Oregon Scientific Model IWA-80055 Wireless Thermo Clock, in which when I replaced the batteries in the remote sensor, the clock would not read the temperature from the remote sensor.
I found it fairly consistent to solve this by taking a battery out of place in the clock and putting it back in.  Unfortunately this also messed up the clock's time and date.  This is also in the instructions catalogue for the device, check and see if yours gives a similar solution.

Dec 30, 2008 | Oregon Scientific Lwb0997110113004...

1 Answer

Changed batteries


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 07, 2008 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...