I have tried to assemble my machine using Biostar 945GZ-SE Micro Socket 775 mother board at the first instance it works but after a while it didn't send any signal to the Monitor.So any one who could help me out,please.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Get onlineand got to www.google.com In the google search box type: "BiostarSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Look for manual on the site.
Dear there can be many reasons -> Faulty fan that can fail to cool your machine.> Faulty power supply.> It might happen your the power plug in from the case's power switch hooked up to the wrong pins of the motherboard.> You can if you are confident have a look on those parts and fix those pin again or better to look for a service center.
you may have a short somewhere, maybe against the pc case or a cmos chip fault.
You could have stressed the board when fitting the tv card, or the motherboard was simply faulty at purchase.
You will have to reset the bios by the shorting terminals (refer to manual) as removing the battery alone does not always reset the bios.