Question about Kodak EASYSHARE Plus Series 3 Thermal Photo Printer

1 Answer

Printer dock only prints 1/4 of picture

My printr ock only prints about 1/d of the picture. What is wrong with it. We've had it for two years and it worked fine up until now. What's the slution to this problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You have answered questions regarding people who have photo printers. The questions asked are based on thermal transfer image printers, not bubble jet as your answers seem to be based on. FYI if people are having issues with their thermal printers, particularly with pictures printing, "Printing" partial pages, how in the world could you deduce that there is a driver issue? You've been more harmful than helpful. If for some reason there is "No" printing being done, then sure 25% of the problem could be drivers or firmware issues. However if it all of a sudden happens, then we have to think of it like a chain on a bicycle suddenly
breaking. Which in this case has a percentage of 50% or greater being the problem.
The lucky ones, (those w/ mechanical aptitude) can simply open the printer and make the screw adjustment(don't get me wrong it's time consuming and tedious) but the unlucky ones will find a cracked gear assembly which depending on the seriousness may be able to be repaired with "Model Glue". The recommended action is to follow your warranty, should
you not have one, guess what, these models are no longer manufactured for this exact reason. Which is why Kodak changed the color to Black on the new ones. So remember, if you buy it on sale... You now have full experience as to why the item was on sale in the first place, same goes with Manufacturer coupons as well!!!! If you want an item to last you don't buy it on sale, that old wives tale of 'Overstocked Item' is a gimmick
and remember to follow the item you purchased at full price. If all of a sudden the items price drops to half price, contact the manufacture to find out why, you may have a hidden problem, and if you contact them inside your warranty range you stand a good chance of receiving a voucher for a replacement model to keep you from getting to the point you are in currently. Good luck, and remember if it's on sale, you should reconsider how long you are going to long you need the product before you buy
it!!! Computer, Copier, Printer Technician 35 years..

Posted on Jul 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blue ink doesnt print ..yello balck,and magenta are fine .WHATS wrong ?


I recommend you.
1.- Remove the printheads
2.- clean the contacts in printhead and in the carriage cartrigde. Use a clean cloth
and reseat the printheads

In printr control panel enter to menu "maintenance"
Do a clean nozzle
If continue problem

Try a new cartrigde, you can buy on

http://www.amazon.com/Compatible-Yield-Black-Cartridges-Printers/dp/B004LOB2DK/ref=sr_1_1?ie=UTF8&qid=1316743621&sr=8-1

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Sep 23, 2011 | Dell V313w AllInOne InkJet Printer

1 Answer

My printer has the blue light on the lightbult and low toner (but ink is fine) - it will not print anything. The stuff sits in the print queue and i have to eventually delete it. The report will print...


My work-around for this problem is to feed paper in manually through the front. I turn the printer off and make sure all paper is out of the printer. When you turn the printer on - and the blue light stays lit (if it doesn't turn it off and wait - I've had to wait quite some time sometimes).. then manually feed 1 sheet of paper in the manual feed tray at the front. When the paper is inserted... you should be fine to print - and keep feeding paper in until you get your job. If you miss - you might need to hit the "continue" (triangle button)..
I've been trying to find out why mine locks up - and why it keeps jamming - but this is a tried and proven menthod - althought it is annoying it might help you for now.. Good luck

Sep 02, 2011 | Lexmark E250dn Laser Printer

1 Answer

Only half the picture is printing.


reviews.cnet.com/...photo-printers/easyshare-printer-dock.../4505-13252_7-30471124.html

Aug 02, 2010 | Kodak EasyShare Thermal Photo Printer

1 Answer

Won't print black


chack your balck cartridges may be it's finish just tak out seak that will fome to know is the ink of finish

relpace that it will work fine

May 10, 2010 | Brother MFC 490cw Color Inkjet...

1 Answer

Does not print total picture I only get a 1 inch strip down the left side on two different printer docks after taking a panorama picture


sounds like you need to go to the printer page, go to set up and do a printing test. this will clean the heads and set the printing format.
lastly, kodak's web site might have a trouble shooting information guide to help resolve the issues.

Apr 29, 2010 | Kodak EasyShare Printer Dock Series 3

1 Answer

"WRONG CARTRIDGE" continues to flash on the screen.


I have experienced the "Wrong Cartridge" error about 4 times in four years. I have never bought a replacement print head. I do occasional printing each week. Typically the problem occurs after a color cartridge goes empty and the ink dried to the print head. The solution for me has been to remove the cartridges, remove the print head, place the print head in hot water in the kitchen sink (softens water based ink that has hardened)and then use a Q-Tip or tissue paper to clean the print head until it is nice and shiny. Reinstall the print head, insert ink cartridges that are not empty, let the printer cycle through a self-test, use the set button to accept vertical and horizontal print patterns and you'll be good to go!
If that doesn't fix it, you'll need to replace the printhead ($49-69 depending on where you buy it.

Oct 11, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Changing the black cartridge also require change of color


The printer is very good.I ve been using it for approx 1 year now.The printer works on a combination of both black as well as colour ink cartridges.If any of the cartridge is empty,printer will not print.Kindly call Kodak with your problems at 1800 421 6699 and they will take care of the issue for you.

Oct 04, 2009 | Kodak ESP 5 Printer

1 Answer

Easy share printer dock only prints half of picture


You have to go to printers & faxes on your "start" button on your computer screen. And click properties on your printer. And fix the alignment size of picture printing. Or your out of ink.

Jun 03, 2009 | Kodak EASYSHARE Printer Dock Thermal Photo

Not finding what you are looking for?
Kodak EASYSHARE Plus Series 3 Thermal Photo Printer Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...