Question about Canon imageRUNNER C3220 Color Copier

3 Answers

Canon IR 8500 Error code E000069-0000

Please could someone help with error code E000069-0000

Posted by on

  • 1 more comment 
  • Anonymous Apr 02, 2009

    i have IR 105 and IR72 missions. those two have sma problem R069. some time in not print totla page

  • Anonymous Mar 14, 2014

    canon ir 105 error code e000065000

  • Anonymous Mar 31, 2014

    FONCTION COPY BLOQUER

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You have a high-voltage leak to the transfer corona. This could be due to several different things, usually it's a dirty corona, maybe excessive dust or toner in the corona assembly. Toner conducts electricity and can leak voltage from the transfer corona to the frame. It may also be the "end-blocks," the thing in the back of the machine into which the transfer corona plugs when you close the drawer and lift up on the green handle. These crack and can cause intermittant failure.
I would start by taking a can of air and thoroughly blowing out the corona assembly and see what that does for you...

Posted on Aug 05, 2008

  • Shep May 30, 2012

    Worked Like a CHARM. Thanks

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My ir105 is giving me an error code E000069-0000 please help.

Posted on Nov 28, 2008

  • jabrawltaa Nov 29, 2008

    Suggestions offered by Nathanlindle worked. It was the transfer corona. Thank you.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have a high voltage problem turn off copier and unplug it four a few minuts then repower, good luck

Posted on Jun 25, 2008

2 Suggested Answers

marketex
  • 371 Answers

SOURCE: canon ir 8500 error code 001-010 and E 001-003

You can start by downloading this software, a new driver dated April 7, 2009
canon driver for the ir 8500

Posted on Apr 15, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aficio 270, Sc 392, error code


Good morning,
I need help, my Ricoh Aficio 1022 with this error SC-392 is an error of sensor density toner.
I've only had the unit for another and still the same, and the unit is running on another machine.
Already cleaned the connectors Unit
Please if someone can help me.
E-mail: cybercopy.udi @ hotmail.com

Jul 16, 2012 | Ricoh Aficio 1515MF All-In-One Laser...

1 Answer

I'm having trouble code 80 for the machine processes the file and not print accuses engine failure''firmware''someone could help me please, I have changed the image processor board and...


hi there

Error Description: Engine Logic Board Failure, Code 80

Possible Solution:

1. Cycle power to the printer to clear the error.

2. Did this clear the error? If, yes problem resolved , if no, replace the engine control board , or,

The image processor board


eng log brd part # required, 160K85653 cost approximate $125

proc brd 650-4306-00 aproximate cost $160



hope this helps -- please send me 4 thumbs up

Jul 10, 2011 | Xerox Phaser 7750DN Laser Printer

1 Answer

Please help me, i had a canon MX338 and MX328 software resetter


Hi


This error comes due to NV RAMof the printer. To diagnose this issue you'll need to reset the NV RAM of your printer, you can do that by entering the service mode. To do this turn on the machine. Press menu button the printer. Press scan button, then press copy and then scan button again to enter the service mode. Use > to go to NV RAM access. Set abs-m level to 0. Set abs-p level to 0. Press stop to exit.

This will resolve your issue. If still not resolved then try the above procedure by restarting it once.
Daniel Scott

Jun 26, 2010 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

Error on printer Connon ip 1000


Error code: 5600
Description: Cartridge displaced error
Symptom: blink in orange 9 times,beep 10 times

try removing and replacing the cartridge

please rate our help to keep the service online

Aug 24, 2009 | Epson Stylus Photo® R2400 InkJet Printer

1 Answer

Error Code E075-004 on a clc 1000 I have Re-position the transfer belt but I keep getting this error code and told to turn off and then on but the error keep commin back. I was also told that i had to go...


go to service mode by *2&8 * then you can release the error E075,Asterisk(*) button is in left side of control panel just lift the small cover .hope this will help

Jul 05, 2009 | Canon Office Equipment & Supplies

3 Answers

Error code E000732-0001


This error indicates that it cant detect the scanner unit of IRC3220

Check the cable that connect the machine and scanner unit .switch off the machine disconnect the cable and reconnect it and switch on the machine again hope this will help

Jul 01, 2009 | Canon imageRUNNER C3220 Color Copier

1 Answer

What is error code f105 for an toshiba e-studio 520 copier?


Dear sir; There have your solution, try to turn power off and on, if can not reset , you have to replace HARD DRIVE, f105 is hard drive problem. good luck! if you need more help please let me know, HAVE A HAPPY HOLIDAY !!!

Dec 20, 2008 | Toshiba E-STUDIO 650 Copier

1 Answer

Errorcode c-2555


Good morning,

Just had the same problem & it was low toner density on the yellow toner. We told to change the toner or shake the existing one & put it in again.

hope this helps.

Oct 11, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Afficio 450


Goto to copytechnet.com. Someone can help you locate the error codes you are looking for. That one is supported by copier technicians.

Aug 05, 2008 | Ricoh Aficio 450 Copier

2 Answers

HOW TO CLEAR ERROR E350-0000


Did you recently clear RCON and tried to due a CCD adjust? The problem could be the that the left side glass retainer changed or mared or has a doc feeder been added or removed. There is a bar code on the under side of it. The part number for the 1000/3100 is FF5-4662-020, the 2400 FF5-8802-000

Jan 25, 2008 | Canon CLC 1000 Color Copier

Not finding what you are looking for?
Canon imageRUNNER C3220 Color Copier Logo

7,793 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98608 Answers

old marine
old marine

Level 3 Expert

1566 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...