Question about Netopia ADSL2+ 11G WIIRELESS ROUTER 400MW 4PORT MANAGED SWITCH

1 Answer

Dial up? does the router work with dial-up internet connection?? (i have a service called "NETZERO")

Posted by on

  • Timmy Buggy Jul 04, 2008

    oh.... im just researching.... hehehe

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Technically no, not unless the PC where the modem is connected to is used as a Gateway/Share Internet Connection and is connected to the WAN side of the router. However, this arrangement would need a lot of manual configuration and settings on the modem side PC as well as the client PCs.

Alternately, you may be better off connecting the modem PC to a hub rather than a router and set static IP adds on the client PCs.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like t change m netzero internet plan?


Please contact NetZero. FixYa cannot alter a plan you have with another company.

Oct 07, 2016 | Routers

1 Answer

One light blinking on the lingo box. no phone service today no dial tone may have a connection problem. i have been on my cell phone for over 2 hours trying to get help. service is not good today. please...


I think you need help from your telco, not from me. This looks like a local loop problem if you have no dial tone. Call your telco and say, "No dial tone, no internet". They will dispatch repair..

Jan 09, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Netzero connection problem?


A modem is a device that allows you to use a voice telephone line to connect your computer to the internet. If you contact NetZero Tech Support, they will send you a CD to run through the setup. The modem connects to the wall with a standard telephone wire. (The ends are known as RJ11)

Aug 15, 2009 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

I have the 2wire dsl modem and a linksys router no connection.


Linksys is the problem. (unreliable quality)
Call their help (in India) and hope you can understand what they saying :)

Get a Belkin router.
It's much easier to setup and a lot more reliable.

Apr 07, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

I am not able to pair my balkin wirless router Gplus model no F5D7231-4 with my internet cable modem if i try to do so my internet also stop working and i have to again call my internet service provider to...


How to do connect to internet access on your modem? Automatic or manual where u need to click a icon to connect (dial up) ?
If u need to manual connect, then u cannot add router.

Why don't u just ask the ISP to setup for u also?

Mar 10, 2009 | Belkin (F5D5231-4) Router

2 Answers

I can'T setup internet on laptop


1st step is to call netzero and as per the setup get it configured.

2nd on your comp go to control panel-network connections- delete all the connections listed their- insert the disc provided with router- run the setup and install it- then connect the usb of router and see if it works..

Clarify ur setup more for more help

Feb 04, 2009 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

Use a wired router for dial-up (NETZERO) connection..


You want to use a LAN with a router that uses a dial-up as a backbone internet connection for your LAN.
This is absolutely possible.

If you just want to share the connection that one computer has, and dont want to buy a router that has a built-in modem, try this

If you are running windows, There is a feature called Internet Connection Sharing (ICS.) It will share the dialup across the network.

Just 1 hookup the router and all the pcs to it. 2 Dialup the machine with the modem. 3 Enable ICS on that machine. 4 Youre LAN is online.

In XP, goto the network connections, and while you have 2 active connections in there (the dialup and the LAN port connected to the router), right click the dialup, goto properties. goto advanced tab, and click on enable ICS.
The other computers should be served IP's automatically and NAT'd out to the internet by the computer running ICS.

(The other computers should be automatically setup to the internet like they should be and connected to the dialup riunning on the ICS (host) computer)



May 16, 2008 | Linksys (R) RT41P2-AT 4-Port Wired Router...

1 Answer

Ic help


Scenario 2 to 4: Scenario 2) The modem does not have an Ethernet port. The modem is a dial-up modem for traditional dial-up service. To use the Router, you need a cable/DSL modem and high-speed Internet connection.

Scenario 3) You cannot use the DSL service to connect manually to the Internet.
After you have installed the Router, it will automatically connect to your Internet Service Provider (ISP), so you no longer need to connect manually.

Scenario 4) The DSL telephone line does not fit into the Router’s Internet port.
The Router does not replace your modem. You still need your DSL modem in order to use the Router. Connect the telephone line to the DSL modem, insert the setup CD into your computer, and then follow the on-screen instructions

Apr 19, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Blitzz Router


Ah, you can no longer use the modem or the Blitzz screen to connect to your Internet connection. You'll need to patch another Ethernet cord from the router to your Ethernet port on your computer and it should automatically connect. If you still get prompted to dial, open up Internet Explorer and ignore any prompts to dial and then click Tools, then Internet Options, then click the Connections tab at the top, then click the selection to Never Dial a Connection. Confirm your choice by clicking OK and then try browsing the Internet like usual.

Aug 30, 2007 | Blitzz Technology BWA711 (B3WL000900)...

2 Answers

Wont connect to the internet


Try this, assuming you're using Internet Explorer: Go to Tools > Internet Options and select the Connections tab. Does it show your old dial-up connection in the list? If so highlight it and click on REMOVE. Close IE and re-open it. It should now use the Belkin LAN connection.

Aug 18, 2007 | Belkin (F5D7231UK4) Wireless Router

Not finding what you are looking for?
Netopia ADSL2+ 11G WIIRELESS ROUTER 400MW 4PORT MANAGED SWITCH Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Routers Experts

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Ed Mac

Level 3 Expert

709 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Netopia Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...